There are two ways to be able to run for example the treo in VMware. As you well known the usbfs is disable in SuSE 10.2 and therefore you can not sync. Other usb devices are not affected like keyboard etc. 1. You can download the beta 6.0 of VMware workstation. The problem is solved there (I have not done it yet) 2. Enable usbfs in the kernel. You can install a new vanilla kernel load the old config, enable the module and recompile. Another approach is just to use the same source and recompile. This is the fastest way. I have done it 4 time and my treo works great. 2.1 Require installation: #yast -i ncurses-devel This is required for make menuconfig command And also be sure you have the kernel-source installed. 2.2 The kernel and kernel-source must be the same version. $ rpm -qa | grep kernel 2. 3 Now change configuration. # cd /usr/src/linux # make mrproper # make menuconfig Change configuration -> Device Drivers//USB support/USB device filesystem and selected it! When you exit and ask for save say yes 2.4 Install # make modules && make modules_install 2.5 Reboot If you have problems to sync after start another thread or e-mail me. Ciao -=terry (Denver)=- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org