Have installed 10.2 on a Dell Precision 690 which has a Qlogic 2GB HBA installed. During the installation process the controller is recognised and the following drivers are installed: qla23xx and qla2300. After startup, Yast.Hardware.DiskControllers shows Qlogic QLA2312 Fibre Channel Controller Yast.Hardware.Hardware Information.PCI shows 2 QLA2312 Fibre Channel Adapters However, Yast.System.Partioner does not recognise that storage is attached. Downloaded SanSurfer Linux Driver Installer (qlafc-linux-8.01.06-1install.tgz) from http://support.qlogic.com/support/os_detail.asp?productid=255&osid=126 Ran install as per instructions, resulting in the following output: <BOF> #*********************************************************# # SANsurfer Driver Installer for Linux # # Installer Version: 1.01.00pre14 # #*********************************************************# Kernel version: 2.6.18.2-34-bigsmp Distribution: openSUSE 10.2 (i586) Found QLogic Fibre Channel Adapter in the system 1. ISP2312 Installation will begin for following driver 1. qla2xxx version: v8.01.06 Preparing... ################################################## qla2xxx ################################################## QLA2XXX -- Building the qla2xxx driver, please wait... (bad exit status)make -j5 -C /lib/modules/2.6.18.2-34-bigsmp/source O=/lib/modules/2.6.18.2-34-bigsmp/build M=/usr/src/qlogic/v8.01.06-1/qla2xxx-8.01.06 modules >& /usr/src/qlogic/v8.01.06-1/build.log failed to execute QLA2XXX -- Installing the qla2xxx modules to /lib/modules/2.6.18.2-34-bigsmp/kernel/drivers/scsi/qla2xxx/... install: cannot stat `*.ko': No such file or directory Setting up QLogic HBA API library... Please make sure the /usr/lib/libqlsdm.so file is not in use. Installing ia32 api binary. Done. Unloading any loaded drivers Loading module qla2xxx_conf version: v8.01.06.... FATAL: Module qla2xxx_conf not found. Module qla2xxx_conf load failed Loading module qla2xxx version: v8.01.06.... FATAL: Module qla2xxx_conf not found. FATAL: Error inserting qla2xxx (/lib/modules/2.6.18.2-34-bigsmp/kernel/drivers/scsi/qla2xxx/qla2xxx.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error running install command for qla2xxx Module qla2xxx load failed Loading module qla2300 version: v8.01.06.... Module qla2300 load failed Unable to load new driver. Skipping persisten binding... Please use ./qlinstall -p -u to update persistent binding manually Saved copy of /etc/sysconfig/kernel as /usr/src/qlogic/v8.01.06-1/backup/kernel-2.6.18.2-34-bigsmp-011907-140809.bak Saved copy of /etc/modprobe.conf.local as /usr/src/qlogic/v8.01.06-1/backup/modprobe.conf.local-2.6.18.2-34-bigsmp-011907-140809.bak Saved copy of /boot/initrd-2.6.18.2-34-bigsmp as /usr/src/qlogic/v8.01.06-1/backup/initrd-2.6.18.2-34-bigsmp-011907-140809.bak QLA2XXX -- Rebuilding ramdisk image... Ramdisk created. Reloading the QLogic FC HBA drivers.... qla2300 module is not loaded Loading module qla2xxx_conf version: v8.01.06.... FATAL: Module qla2xxx_conf not found. Module qla2xxx_conf load failed Loading module qla2xxx version: v8.01.06.... FATAL: Module qla2xxx_conf not found. FATAL: Error inserting qla2xxx (/lib/modules/2.6.18.2-34-bigsmp/kernel/drivers/scsi/qla2xxx/qla2xxx.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error running install command for qla2xxx Module qla2xxx load failed Loading module qla2300 version: v8.01.06.... Module qla2300 load failed ERROR: qla2xxx installation failed <EOF> Downloaded source tarball for driver (qla2xxx-v8.01.06-dist.tgz) from http://support.qlogic.com/support/EULATemplate/Template.aspx?TemplateID=1&path=http://download.qlogic.com/drivers/48933/qla2xxx-v8.01.06-dist.tgz. Ran install as per instructions, resulting in the following output: <BOF> QLA2XXX -- Clean rebuild of the qla2xxx driver, please wait... make: Entering directory `/usr/src/linux-2.6.18.2-34' /usr/src/linux-2.6.18.2-34/scripts/Makefile.build:23: kbuild: /qlogic/qla2xxx-8.01.06/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y! CC [M] /qlogic/qla2xxx-8.01.06/ql2100.o CC [M] /qlogic/qla2xxx-8.01.06/ql2100_fw.o CC [M] /qlogic/qla2xxx-8.01.06/ql2200.o CC [M] /qlogic/qla2xxx-8.01.06/ql2200_fw.o CC [M] /qlogic/qla2xxx-8.01.06/ql2300.o CC [M] /qlogic/qla2xxx-8.01.06/ql2300_fw.o CC [M] /qlogic/qla2xxx-8.01.06/ql2322.o CC [M] /qlogic/qla2xxx-8.01.06/ql2322_fw.o CC [M] /qlogic/qla2xxx-8.01.06/ql2400.o CC [M] /qlogic/qla2xxx-8.01.06/ql2400_fw.o CC [M] /qlogic/qla2xxx-8.01.06/qla_os.o CC [M] /qlogic/qla2xxx-8.01.06/qla_init.o CC [M] /qlogic/qla2xxx-8.01.06/qla_mbx.o CC [M] /qlogic/qla2xxx-8.01.06/qla_iocb.o CC [M] /qlogic/qla2xxx-8.01.06/qla_isr.o /qlogic/qla2xxx-8.01.06/qla_os.c: In function ƒ_~qla2x00_ioctl_error_recoveryƒ_T: /qlogic/qla2xxx-8.01.06/qla_os.c:5356: warning: unused variable ƒ_~flagsƒ_T /qlogic/qla2xxx-8.01.06/qla_os.c: In function ƒ_~qla2x00_cleanup_module_exitƒ_T: /qlogic/qla2xxx-8.01.06/qla_os.c:5392: error: implicit declaration of function ƒ_~inter_module_putƒ_T /qlogic/qla2xxx-8.01.06/qla_os.c: In function ƒ_~qla2x00_module_initƒ_T: /qlogic/qla2xxx-8.01.06/qla_os.c:5440: error: implicit declaration of function ƒ_~inter_module_get_requestƒ_T make[2]: *** [/qlogic/qla2xxx-8.01.06/qla_os.o] Error 1 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [_module_/qlogic/qla2xxx-8.01.06] Error 2 make: *** [modules] Error 2 make: Leaving directory `/usr/src/linux-2.6.18.2-34' QLA2XXX -- Failed. <EOF> Any assistance in resolving this problem would be greatly appreciated. Cheers DeanM -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org