I have an older Intel server with a Mylex RAID card in it. The array is 6 drives in RAID 5, no spares. The installer complains about not being able to do anything on the array, so i got into a rescue kernel boot and used fdisk to make three parttitions on it. /dev/rd/c0d0p1 - /boot (ext2) /dev/rd/c0d0p2 - swap (swap) /dev/rd/c0d0p3 - / (xfs) I made the filesystems after syncing the disks. But the installer doesn't recognize them at all. It sees /dev/rd/c0d0 as a full partition, and states it cannot do anything with it. How do i get the table read? How do i initialize the array for usage in the installer? -- /Rikard ----------------------------------------------------------------------------- email : rikard.j@rikjoh.com web : http://www.rikjoh.com mob: : +46 (0)763 19 76 25 ------------------------ Public PGP fingerprint ---------------------------- < 15 28 DF 78 67 98 B2 16 1F D3 FD C5 59 D4 B6 78 46 1C EE 56 >