Hi, I recently (just now), installed and configured the pptp-client, to help me hook me up to my workplace's MS VPN server. Unfortunately, i have ran into a little bump in the road, regarding nameservers, and how hosts are looked up. Take this scenario: ------------------------------ Company setup: VPN server: vpn.company.com Internal network (company.net): 10.0.0.0/8 Internal gateway: 10.5.26.2 VPN client IP's: 10.5.26.X DNS: 10.12.1.2 / 10.12.2.2 My setup: Local IP (eth0): 10.0.0.2/24 Default GW (router): 10.0.0.1 DNS: 10.0.0.1 Tunnel device: ppp0 ------------------------------ I dont want to route my normal internet traffic through the VPN, so i connect to vpn.company.com, and add the network with: add -net 10.0.0.0 netmask 255.0.0.0 ppp0 So far so good. Connection to both internet and internal company hosts are working. Now, i want to be able to go to opensuse.org, routed through eth0, using 10.0.0.1 as nameserver. At the same time, i want to be able to go to intranet.company.net, routed through ppp0, using 10.12.1.2 as nameserver. My guess at this configuration would be: /etc/resolv.conf: domain company.net nameserver 10.0.0.1 nameserver 10.12.1.2 But this results in opensuse.org being looked up, while intranet.company.net fails. Another guess: /etc/resolv.conf domain company.net nameserver 10.12.1.2 nameserver 10.0.0.1 Which leads to intranet.company.net being looked up, while opensuse.org fails. How on earth do i get around this, and why does it seem that both nameservers are not queried ? Best Regards Sylvester Lykkehus