Leen de Braal wrote:
Telepathic guess: you might have a driver modules problem. Unfortunately you do not mention what version of Suse you use or what hardware is involved (mainboard, lan adapter, sata controller) or even if it is a hardware raid or software raid.
9.2, kernel is 2.6.8-24.17-default Intel D865PERL mobo with P4-2.4, 512MB RAM software raid, 2x 400GB Seagate SATA Machine has been running fine for over 6 weeks
Usually onboard chips of Intel are well supported by Linux. No special sata controller either. So, I don't think it's a driver problem.
I would try to check the logs shortly before the time you experienced a system freeze, try to find common causes for those freezes. Also try to provoke a system freeze (if it's not a production system in use).
Log gives errors: kernel: ata2: status=0x51 { DriveReady SeekComplete Error } kernel: ata2: error=0x40 { UncorrectableError }
I have seen errors like that when the mainboard bios couldn't support the disk size. The system would write data to a block that the bios remapped to a wrong block (48Bit LBA not supported by bios). The result was difficult to reproduce system freezes and data loss.
In any case I would check the Intel site if an update for your mainboard bios is available.
Good point, I will check this. Did not think of it yet. Intel has version P21 now, P15 was running. Updated. In releasenotes nothing about SATA or RAID though.
For what it's worth, I don't think you did anything wrong while setting up the raid. I rather suspect the disks are unreliable or maybe the combination of Motherboard+ sata controller / sata disks ist not well balanced. There is a remote possibility that the system might require a more stable power supply unit, but I haven't seen anything in your description to suggest such a high power demand.
The only software/configuration options are to set mainboard bios options more conservatively or play with hdparm.
It might be worth the time to check the technical documentation of the discs for MTBF.
Still have some questions: - are those errors due to harddrive problems?
Very likely. Either entirely hardware or a driver/bios problem.
- or is it due to misconfiguration in software raid? (done it with yast)
Unlikely.
- is it something software raid should correct (I expected that raid was for redundancy and corrected errors?)
Provided the raid controller doesn't crap out and trashes the raid structure. Though in this case the software raid can't do anything if the controller can't access the drive correctly.
You could check the SMART parameters of the disks with smartmon tools.
These drives seem not to have smart, at least manufacturertools say so
Whoa! Very strange. Almost all recent disks support smart.
Yes they do. I just dl'd the latest version of seatools, smarttests report no problems. Will try smartmon tools to see more details. Thanks for helping so far.
Sandy
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
-- L. de Braal BraHa Systems NL - Terneuzen T +31 115 649333 F +31 115 649444