On Sat, 11 Dec 2004 00:54:12 +0100, Johan Nielsen
Fredag 10 december 2004 22:54 skrev Greg Freemyer:
On Fri, 10 Dec 2004 13:29:21 +0100, Johan Nielsen
wrote: So far everything I have tried has worked "by itself". (I have tried IDE, SATA, 3ware, Adaptec SCSI controller, and a SIIG ATA/133 card.)
Well a little more specific please ..... one that would interest me was the
Promise SATA (I) 150 TX4 ( have a SATA II 150 TX4 and that one doesn't work with SuSE 9.2 as a "regular" storagecontroller with SATA I drives)
Sorry, I don't have that controller to test with.
Where I am having problems is with combinations.
For instance, I have a Intel P4 machine that I would like to have Motherboard IDE, Motherboard SATA, and a PCI SIIG card working all at once. So far no luck.
Would be nice to know what motherboard for qualified replies to that ;-)
It is a D865GVHZ running Bios BF86510A.86A.0061.P17
If I go into bios and disable SATA, then it works, or if I pull out the SIIG card it works.
With both in, I cannot even boot the live CD.
For the above, it seems confusion arises from what /dev/hda, etc. refers to as the booting process progresses.
I have another machine (P3) that goes into an infinite loop of printing to the console if I have the exact same SIIG card in it.
For that machine, I can get it to boot if I use an older SIIG card, but then it locks up when I try to access a drive connected to it.
I'm about to try a kernel of the day to see if it works any better.
I actually tried the latest YOU kernel on this machine. It seems to be working so far. I'm reading in a large tape now to see how it does. I was totally unable to use the SIIG connected drives with the kernel on the 9.2 CDs, so this is a big step forward. Greg -- Greg Freemyer