Felipe Leon wrote:
Group, I got this "new" usb mass storage device with a high capacity: 2.2 gb but sadly could not mount it. Similar situation as with Basil's post. Here is the log:
Mar 21 16:28:52 grande kernel: hub.c: new USB device 00:02.3-2, assigned address 2 Mar 21 16:28:52 grande kernel: usb.c: USB device 2 (vend/prod 0xea0/0x2118) is not claimed by any active driver. Mar 21 16:28:56 grande kernel: Initializing USB Mass Storage driver... Mar 21 16:28:56 grande kernel: usb.c: registered new driver usb-storage Mar 21 16:28:56 grande kernel: scsi1 : SCSI emulation for USB Mass Storage devices Mar 21 16:28:56 grande kernel: Vendor: USB Model: Storage Device Rev: 2.00 Mar 21 16:28:56 grande kernel: Type: Direct-Access ANSI SCSI revision: 02 Mar 21 16:28:56 grande kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 Mar 21 16:28:58 grande kernel: SCSI device sda: 4161315 512-byte hdwr sectors (2131 MB) Mar 21 16:28:58 grande kernel: sda: Write Protect is off Mar 21 16:28:58 grande insmod: Using /lib/modules/2.4.21-192-athlon/kernel/drivers/usb/storage/usb-storage.o Mar 21 16:28:58 grande insmod: Symbol version prefix '' Mar 21 16:28:58 grande kernel: sda: sda1 sda2 sda4 Mar 21 16:28:58 grande kernel: WARNING: USB Mass Storage data integrity not assured Mar 21 16:28:58 grande kernel: USB Mass Storage device found at 2 Mar 21 16:28:58 grande kernel: USB Mass Storage support registered.
later in the messages:
Mar 21 16:33:26 grande kernel: Device 08:01 not ready. Mar 21 16:33:26 grande kernel: I/O error: dev 08:01, sector 0 Mar 21 16:33:27 grande kernel: sda : READ CAPACITY failed. Mar 21 16:33:27 grande kernel: sda : status = 1, message = 00, host = 0, driver = 08 Mar 21 16:33:27 grande kernel: Current sd00:00: sense key Not Ready Mar 21 16:33:27 grande kernel: Additional sense indicates Medium not present Mar 21 16:33:27 grande kernel: sda : block size assumed to be 512 bytes, disk size 1GB. Mar 21 16:33:27 grande kernel: sda: test WP failed, assume Write Enabled Mar 21 16:33:27 grande kernel: sda: I/O error: dev 08:00, sector 0 Mar 21 16:33:27 grande kernel: I/O error: dev 08:00, sector 0 Mar 21 16:33:27 grande kernel: I/O error: dev 08:00, sector 2097144 Mar 21 16:33:27 grande kernel: I/O error: dev 08:00, sector 2097144 Mar 21 16:33:27 grande kernel: I/O error: dev 08:00, sector 0 Mar 21 16:33:27 grande kernel: I/O error: dev 08:00, sector 0 Mar 21 16:33:27 grande kernel: unable to read partition table Mar 21 16:33:30 grande kernel: sda : READ CAPACITY failed.
I guess there is some recognition by the kernel but later there is some mistake when mounting. Any suggestions?
Thanks
Felipe.
There are some similarity in the info shown in the error message/log, but not completely which is probably because I suspect that you are connecting an external USB HD and not the flash disk I have. Nevertheless we both have the same hassle. Scanning the archives for this forum for the months Jan and Feb there were similar problems aired but, as I said in my oroginal message, just when it appeared that an answer to the problem was forthcoming there was no answer and the impression I was left with was that the answer went privately as e-mail and not copied to this Suse Help forum. So, if someone replies to you with the answer PLEASE post it publicly here, OK and cross-your-heart? Cheers. -- All Scottish food is based on a dare.