I'm at wits end - Looking for some help: 1st box: SuSE 9.0 Professional 2 NIC's eth0 to Firewall (7.3) DNAT'd http server (my DMZ) 172.x.x.x eth1 to Internal network for only SSH and updates right now.... 192.x.45.x Problem with 1st box - I can't run Yast without changing default route to eth1 (I currently have no intent to do FTP to this webserver, but would like to be able to do my own mail in the future) So....currently to update I edit the /etc/sysconfig/network/routes and change default and do an rcnetwork restart ... then I can do the updates... I then change "default" route back to eth0 and rcnetwork restart again... I'm back in "production" How do I avoid this ? =================================================== 2nd box: SuSE 8.2 Professional 3 NIC's eth0 to Firewall (7.3) (same "Firewall" as above, different NIC) 192.x.35.x eth1 to Switch and "the rest" of the network 192.x.45.x eth2 to ISDN modem to work 10.x.x.x This 2nd box is my name server, squid server (for internal network) and secondary firewall I want traffic to the internet masqueraded eth0 I want internal traffic to "flow" freely I want any traffic on any part of the LAN intened for the 10.x.x.x network to be routed through eth2 to work I can NOT get the routing to work eth2 to work I have tried edit of /etc/sysconfig/network/routes in various flavors of: 10.x.x.y 10.x.x.z 255.255.255.255 eth2 10.x.x.0 10.x.x.z 255.255.255.0 eth2 10.x.x.0 0.0.0.0 255.255.255.0 eth2 (10.x.x.y is ISDN modem 10.x.x.z is eth2 static) Order seems to make a difference whether route -n (yes I know it's deprecated) reports UGH - UH - U ... bottom line, I can get two of what I thought was 3 of the required UGH-UH-U combo's In /etc/sysconfig/network/ifcfg-eth2 I've experimented with two "REMOTE" addresses (null and the address of the ISDN modem) with no success. I "upgraded" (actually a complete install of 8.2) over what was a working 7.3 box, but these routing differences are killing me, the best I have ever gotten is a connection to work from this box only... I had it all working as desired under 7.3. Yes, it is also a firewall (shorewall 1.4.7) and I am trying the routing AFTER "shorewall clear" which takes the firewall part out of the picture. ================================== Thoughts, ideas, examples, suggestions ?