First, Thanks for helping me, the results are below: On Tuesday 01 July 2003 13:28, Patrick Shanahan wrote:
* Bill Wisse
[07-01-03 19:20]: On Tuesday 01 July 2003 11:39, Patrick Shanahan wrote:
[snip ...]
From a clean boot w/o the card-reader present. Plug-in the card-reader and wait. Approx 5 seconds you should hear a beep indicating hotplug has recognized (iianm) the device and a line should automatically appear after an empty line at the bottom of /etc/fstab, ie: /dev/sdb1 /media/sdb1 auto noauto,user,exec 0 0 #HOTPLUG B3Fu.4G0qp7e_XDE
I did that but ..no line here is the output:
OK, unplug the card-reader and as root, rchotplug restart
Done
Wait a couple of minutes, plug-in the card-reader. After beep, cat /etc/fstab and look for the added line.
No added line
Finally, if no positive results, cat /proc/scsi/scsi and provide the results here.
linux:/home/billy # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: HP Model: CD-Writer+ 9300 Rev: 1.0c Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: OEI-USB Model: CompactFlash Rev: 1.01 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 01 Vendor: OEI-USB Model: SM/MS/SD Rev: 1.01 Type: Direct-Access ANSI SCSI re /bill at 169 west , 19 south.