X86 ?

7 Jul 2002

      Hi all...

I'm trying to set up V8.0 on one of my systems. I used xf86config to 
configure Xwindows. But it does not seem to want to work. Below is the startx 
listing. Can anyone tell me where to look for the problem? BTW sorry about 
the long list.

Thanks

JIM

#############################

Script started on Sun Jul  7 16:45:23 2002
hatridge@linux:~> startx

XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.19 i686 [ELF] SuSE
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
      RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
      GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
      ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
      ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
      wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati,
      sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
      sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx,
      tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
      tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
      tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
      tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
      cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade,
      clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430,
      clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465,
      clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543,
      clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w,
      mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067,
      oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,
      ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
      ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422, AT24,
      AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
      ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
      ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
      ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci,
      Voodoo Banshee, Voodoo3, i810, i810-dc100, i810e, i815, smi, generic
(using VT number 7)

XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(de)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "ET4000 W32i, W32p (generic)"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "800x600" needs hsync freq of 35.16 kHz. Deleted.
(--) SVGA: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 37.50 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 37.88 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 43.27 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 43.92 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) SVGA: Mode "512x384" needs hsync freq of 34.38 kHz. Deleted.
(--) SVGA: Mode "320x240" needs hsync freq of 39.38 kHz. Deleted.
(--) SVGA: Mode "400x300" needs hsync freq of 35.16 kHz. Deleted.
(--) SVGA: Mode "400x300" needs hsync freq of 37.88 kHz. Deleted.
(--) SVGA: Mode "400x300" needs hsync freq of 48.08 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 35.16 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 37.80 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 39.56 kHz. Deleted.
(--) SVGA: Mode "480x300" needs hsync freq of 48.00 kHz. Deleted.
(**) FontPath set to 
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/:unscaled,
/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/URW/,/usr/X11R6/lib/X11/fonts/Speedo/,
/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/,
/usr/X11R6/lib/X11/fonts/truetype/,/usr/X11R6/lib/X11/fonts/uni/"
(--) SVGA: PCI: Tseng Labs ET4000W32P revD rev 0, Memory @ 0xfd000000
(--) SVGA: ET4000W32: Interleaved DRAM detected.
(--) SVGA: Ramdac: stg1703
(--) SVGA: Detected W32p bus type (0x1c): PCI.
(--) SVGA: ET4000: Initial hibit state: high
(--) SVGA: chipset:  ET4000W32p_rev_d
(--) SVGA: videoram: 2048k
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 135.000 MHz
(**) SVGA: Mode "640x480": mode clock =  25.175
(--) SVGA: There is no mode definition named "800x600"
(--) SVGA: Removing mode "800x600" from list of valid modes.
(**) SVGA: Mode "1024x768": mode clock =  44.900
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: Generic SpeedUps selected (Flags=0x30)
(--) SVGA: ET4000W32p_rev_d: Using linear framebuffer at 0xFD000000.
(--) SVGA: ET4000: SpeedUps selected (Flags=0x30)
(--) SVGA: Using 3kb of unused display memory for extra acceleration 
functions.
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 pattern fill
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and non-transparent stipples
(--) SVGA: XAA: General lines and segments
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm -m 
de -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml 
"Errors from xkbcomp are not fatal to the X server" keymap/xfree86 
/var/tmp/xfree86.xkm'
failed to set default font path 
'/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/
X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/URW/,
/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/,
/usr/X11R6/lib/X11/fonts/truetype/,/usr/X11R6/lib/X11/fonts/uni/'
Fatal server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send
the full server output, not just the last messages

XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
      after 0 requests (0 known processed) with 0 events remaining.
hatridge@linux:~> exit

Script done on Sun Jul  7 16:45:41 2002
éu
##############################

-- 
Jim Hatridge
Linux User #88484
------------------------------------------------------
                 BayerWulf
	   Linux System # 129656
         The Recycled Beowulf Project
  Looking for throw-away or obsolete computers and parts
   to recycle into a Linux super computer