Hi, I did several steps to solve this problem : Go to www.nvidia.com, and download the match linux driver for your card, or you can go to manufacturer website to download the driver. In my case i downloaded the rpm file (it make your life easier). There are 2 file you must download . NVIDIA_GLX-1.0-xxxx.suseversion.i386.rpm and NVIDIA_kernel-1.0- xxxx.suseversion.i386.rpm Run this command: # rpm -Uhv NVIDIA_GLX-1.0-xxxx.suseversion.i386.rpm --nodeps --force (ignore all occuring error messages!) # rpm -Uhv NVIDIA_kernel-1.0-xxxx.suseversion.i386.rpm --force # switch2nvidia_glx then run sax2: # sax2 -m 0=nvidia Setup your hardware according to your specification. The final task is enable 3D support of your hardware, by adding this line in your '/etc/X11/XF86Config' in the "Modules" section : ### Load "glx" ### Test your 3D using 3Ddiags in your KDE. Hope this will help you M. Edwin Jakarta - Indonesia -- PT. Nusantara Systems International (http://www.nsi.co.id)