Hi Just a thought as we had a similar problem. Do you have broadband internet, e.g. connection from a DSL modem? Where does your internet plug into? The hub/switch? Try: FW_DEV_EXT= ppp0 Steve. On Tuesday 21 May 2002 09:13, Ryszard Hodiak wrote:
Hi,
I'm sorry to say that but it is not working still?! Mayby the problem is that I don't have two network adapter but only one and I made an alias ? (for me it wouldn't be a reason as long as I have two up interfaces )
cheers, Richard
On Mon, 20 May 2002, jaakko tamminen wrote:
Hi
The difference in my setup is: FW_DEV_INT=eth0 FW_MASQ_DEV=eth1 FW_PROTECT_FROM_INTERNAL=no IP_FORWARD=yes
Try it, and let us know if it works.
Jaska.
On Monday 20 May 2002 20:36, Ryszard Hodiak wrote:
Hi,
Have a problem with SuSEfirewall2 on SuSE8.0 - situation is as follow: when turning on SuSEfirewall2 basicly for masquerade reason I can not access both IP addresses (external and internal network) on my firewall machine from INTERNAL NETWORK only - external is OK ?!
Have any hint what to change to have an access from internal network to my firewall machine - I need that access because this machine is runing SambaPDC so it is necessery.
Thanks in advance
this is my /etc/sysconfig/SuSEfirewall2 config file:
FW_DEV_EXT="eth0" FW_DEV_INT="eth0:1" FW_ROUTE="yes" FW_MASQUERADE="yes" FW_MASQ_DEV="$FW_DEV_EXT" FW_MASQ_NETS="10.10.30.0/24"
exactly what is written into an example file in /usr/share/doc/packgages/SuSEfirewall2
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com