I have setup the modem, etc. but when I try to dial with Kinternet, it comes
up dials, connects, then sends dummy password where ISP comes back and says
login/password pair mismatch.
If I dial with KPPP, it connects with no problem. How do I get Kinternet to
do the correct login and password? It is selecting the correct modem etc.
Also had this problem with 7.3 on the desktop, but on the laptop, it worked
with 7.3. Now, the laptop comes up with same problem.
Also tried putting logon and password in the /etc/wvdial.conf. When I do
this, Kinternet does not even connect.
Here is the log from Kinternet.
SuSE Meta pppd (smpppd), Version 0.73 on sporthorse.
wwwoffle not is running
Selection of interface/provider "ppp0"/"AT&T WorldNet Service (AT&T Corp)"
succeeded.
Starting connection. (2002-04-26 23:55:53 PDT)
pppd: Plugin passwordfd.so loaded.
pppd: Perms of /dev/ttyS3 are ok, no 'mesg n' neccesary.
pppd: --> WvDial: Internet dialer version 1.42
pppd: --> Initializing modem.
pppd: --> Sending: ATZ
pppd: ATZ
pppd: OK
pppd: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd: OK
pppd: --> Sending: ATM1
pppd: ATM1
pppd: OK
pppd: --> Modem initialized.
pppd: --> Sending: ATDT5408991
pppd: --> Waiting for carrier.
pppd: ATDT5408991
pppd: CONNECT 115200
pppd: --> Carrier detected. Waiting for prompt.
pppd: STATION ID - snfca11rh08hp001,snfca43ev
pppd: Welcome
pppd: Please Sign-on:
pppd: --> Looks like a login prompt.
pppd: --> Sending: dummy
pppd: dummy
pppd: Password:
pppd: --> Looks like a password prompt.
pppd: --> Sending: (password)
pppd: Name, password pair incorrect
pppd: Please Sign-on:
pppd: --> Looks like a login prompt.
pppd: --> Sending: dummy
pppd: dummy
pppd: Password:
pppd: --> Looks like a password prompt.
pppd: --> Sending: (password)
pppd: Name, password pair incorrect
pppd: Please Sign-on:
pppd: --> Looks like a login prompt.
pppd: --> Sending: dummy
pppd: --> Don't know what to do! Starting pppd and hoping for the best.
pppd: Serial connection established.
pppd: using channel 2
pppd: Using interface ppp0
pppd: Connect: ppp0 <--> /dev/ttyS3
pppd: sent [LCP ConfReq id=0x1