Hi, Can you include the commands you used for symlinking to the cdrom and cdrecorder? My first suggestion is that you can try to remove the symlink to your cdrom. The cdrecorder should be symlinked to scd1. Run SuSEconfig and reboot. Try now to mount your cdrecorder with 'mount /dev/sr0 /dev/cdrecorder'. Check 'cdrecord --scanbus', and if you can see the cdrecorder in Xcdroast. Jostein
===== Original Message From peter@dixson.co.uk ===== On Monday 03 September 2001 08:22, Jostein Berntsen wrote:
Hi,
First check that you have performed all the steps in this howto:
http://seismo.ethz.ch/linux/xcdroast.html
If you still got problems post your boot log, fstab and mount command.
Jostein
Jostein Can I ask you to look my files please
Inspecting /boot/System.map-2.4.4-4GB Loaded 10917 symbols from /boot/System.map-2.4.4-4GB. Symbols match kernel version 2.4.4. Loaded 33 symbols from 2 modules. klogd 1.3-3, log source = ksyslog started. <4>Linux version 2.4.4-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Fri May 18 14:11:12 GMT 2001 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) <4> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) <4> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <4>Scan SMP from c0000000 for 1024 bytes. <4>Scan SMP from c009fc00 for 1024 bytes. <4>Scan SMP from c00f0000 for 65536 bytes. <4>Scan SMP from c009fc00 for 4096 bytes. <4>On node 0 totalpages: 65520 <4>zone(0): 4096 pages. <4>zone(1): 61424 pages. <4>zone(2): 0 pages. <4>mapped APIC to ffffe000 (01442000) <4>Kernel command line: auto BOOT_IMAGE=linux ro root=344 BOOT_FILE=/boot/vmlinuz <6>Initializing CPU#0 <4>Detected 704.954 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 1405.74 BogoMIPS <4>Memory: 254764k/262080k available (1225k kernel code, 6928k reserved, 933k data, 112k init, 0k highmem) <4>Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) <4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) <4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) <5>VFS: Diskquotas version dquot_6.5.0 initialized <7>CPU: Before vendor init, caps: 0183f9ff c1c3f9ff 00000000, vendor = 2 <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 512K (64 bytes/line) <7>CPU: After vendor init, caps: 0183f9ff c1c3f9ff 00000000 00000000 <7>CPU: After generic, caps: 0183f9ff c1c3f9ff 00000000 00000000 <7>CPU: Common caps: 0183f9ff c1c3f9ff 00000000 00000000 <4>CPU: AMD Athlon(tm) Processor stepping 01 <6>Enabling fast FPU save and restore... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <4>PCI: PCI BIOS revision 2.10 entry at 0xfd9e1, last bus=1 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <6>PCI: Using IRQ router VIA [1106/0686] at 00:04.0 <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) <4>Starting kswapd v1.8 <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <6>vesafb: framebuffer at 0xe4000000, mapped to 0xd0800000, size 32768k <6>vesafb: mode is 800x600x8, linelength=800, pages=31 <6>vesafb: protected mode interface info at c000:7b00 <6>vesafb: scrolling: redraw <4>ptr = cff2a000, len = 2050, con = 0 <4>Console: switching to colour frame buffer device 82x25 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <4>block: queued sectors max/low 169133kB/56377kB, 512 slots per queue <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>VP_IDE: IDE controller on PCI bus 00 dev 21 <4>VP_IDE: chipset revision 6 <4>VP_IDE: not 100%% native mode: will probe irqs later <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>VP_IDE: VIA vt82c686a (rev 1b) IDE UDMA66 controller on pci00:04.1 <4> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA <4> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA <4>hda: IBM-DTLA-307015, ATA DISK drive <4>hdb: FUJITSU MPE3136AT, ATA DISK drive <4>hdc: Pioneer DVD-ROM ATAPIModel DVD-115 0108, ATAPI CD/DVD-ROM drive <4>hdd: YAMAHA CRW4416E, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>hda: 30003120 sectors (15362 MB) w/1916KiB Cache, CHS=1867/255/63 <6>hdb: 26688576 sectors (13665 MB) w/512KiB Cache, CHS=1661/255/63 <4>hdc: ATAPI DVD-ROM drive, 512kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <4>hdd: ATAPI 16X CD-ROM CD-R/RW drive, 2048kB Cache <6>Partition check: <6> hda: hda1 hda2 < hda5 > <6> hdb: hdb1 hdb2 hdb3 hdb4 <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>loop: loaded (max 8 devices) <6>Serial driver version 5.05a (2001-03-20) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10d <6>SCSI subsystem driver Revision: 1.00 <3>request_module[scsi_hostadapter]: Root fs not mounted <3>request_module[scsi_hostadapter]: Root fs not mounted <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>IP: routing cache hash table of 2048 buckets, 16Kbytes <4>TCP: Hash tables configured (established 16384 bind 16384) <6>Linux IP multicast router 0.06 plus PIM-SM <3>IP-Config: No network devices available. <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <4>VFS: Mounted root (ext2 filesystem) readonly. <4>Freeing unused kernel memory: 112k freed <6>Adding Swap: 208836k swap-space (priority 42) <6>aha152x: BIOS test: passed, detected 1 controller(s) <4>aha152x: resetting bus... <6>aha152x0: vital data: rev=3, io=0x140 (0x140/0x140), irq=10, scsiid=7, reconnect=disabled, parity=enabled, synchronous=disabled, delay=1000, extended translation=disabled <6>aha152x0: trying software interrupt, ok. <6>scsi0 : Adaptec 152x SCSI driver; $Revision: 2.4 $ <4> Vendor: AGFA Model: SNAPSCAN 1236 Rev: 1.30 <4> Type: Scanner ANSI SCSI revision: 02 <6>scsi1 : SCSI host adapter emulation for IDE ATAPI devices Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started at Tue Sep 4 19:21:39 2001 Activating swap-devices in /etc/fstab... doneChecking file systems... Parallelizing fsck version 1.19a (13-Jul-2000) /dev/hdb4: clean, 99232/662560 files, 421386/1323354 blocks /dev/hdb1: clean, 32/4016 files, 3735/16033 blocks /dev/hdb3: clean, 1119/28224 files, 40374/112455 blocks doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hdb1 on /boot type ext2 (rw) /dev/hdb3 on /home type ext2 (rw) doneActivating remaining swap-devices in /etc/fstab... doneSetting up the CMOS clockdone Setting up timezone datadone Setting up loopback devicedone Setting up hostnamedone Mount SHM FS on /dev/shmdone Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports doneRunning /etc/init.d/boot.local doneCreating /var/log/boot.msg doneEnabling syn flood protectiondone Disabling IP forwardingdone Boot logging started at Tue Sep 4 19:21:50 2001 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Enabling ide dma mode: hda hdbdone Starting personal-firewall (initial) [active]done Initializing random number generatordone Starting RPC portmap daemondone Starting SSH daemondone Starting syslog servicesdone Starting lpddone Starting service usbmgr done Starting service at daemon:done Loading keymap qwerty/uk.map.gz doneLoading compose table winkeys shiftctrl latin1.adddone Loading console font lat9w-16.psfu doneLoading screenmap trivial doneSetting up console ttys doneStarting CRON daemondone Starting Name Service Cache Daemondone Starting service kdmdone Starting personal-firewall (final) [active]done Starting sound driver: snd-card-emu10k1 done Restoring the previous sound settingdone Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: pcmcia
/dev/hdb4 / ext2 defaults 1 1 /dev/hdb1 /boot ext2 defaults 1 2 /dev/cdrecorder /media/cdrecorder auto ro,noauto,user,exec 0 0 /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 devpts /dev/pts devpts defaults 0 0 /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 /dev/hdb3 /home ext2 defaults 1 2 /dev/fd0 /media/floppy auto noauto,user,sync 0 0 proc /proc proc defaults 0 0 /dev/hda1 /windows/C vfat noauto,user 0 0 /dev/hda5 /windows/D vfat noauto,user 0 0 /dev/hdb2 swap swap pri=42 0 0
The mount command for cdrom & cdrecorder give 'unknown device' as I have linked them with with scd0 & scd1
Regards Peter