On Thu, 16 Aug 2001 09:50:36 +0100 Hello Harrell, from Lourens: [snipped] " I've tried 'sensors' but it gives silly values for everything but the " CPU fan speed. " I ran sensors-detect and it recognised my via chipset correctly and all " the i2c modules were loaded. [end snipped] Same here. /proc/modules via686a 7968 0 sensors 6192 0 [via686a] i2c-isa 1200 0 (unused) i2c-core 12400 0 [via686a sensors i2c-isa] -> I do not understand the blank for via686a and the (unused) i2c-isa ?? /proc/bus/i2c i2c-0 dummy ISA main adapter ISA bus algorithm /proc/bus/i2c-0 e200 Via 686A Integrated Sensors VIA 686A lourens@lourens:~ > sensors -u via686a-isa-e200 Adapter: ISA adapter Algorithm: ISA algorithm CPU core: 3.03 (2.0V) in0_min: 1.79 (in0_min) in0_max: 2.18 (in0_max) +2.5V: 3.03 (2.5V) in1_min: 2.24 (in1_min) in1_max: 2.74 (in1_max) I/O: 3.55 (3.3V) in2_min: 2.95 (in2_min) in2_max: 3.62 (in2_max) +5V: 6.30 (5.0V) in3_min: 4.72 (in3_min) in3_max: 6.30 (in3_max) +12V: 15.28 (12V) in4_min: 15.28 (in4_min) in4_max: 15.28 (in4_max) CPU Fan: 0.00 (fan1) fan1_min: 0.00 (fan1_min) fan1_div: 2.00 (fan1_div) P/S Fan: 0.00 (fan2) fan2_min: 0.00 (fan2_min) fan2_div: 2.00 (fan2_div) SYS Temp: -69.90 (temp1) temp1_hyst: 49.70 (temp1_hyst) temp1_over: 59.90 (temp1_over) CPU Temp: -69.90 (temp2) temp2_hyst: 49.70 (temp2_hyst) temp2_over: 59.90 (temp2_over) SBr Temp: 23.30 (temp3) temp3_hyst: 49.70 (temp3_hyst) temp3_over: 59.90 (temp3_over) alarms: 1795.00 (alarms) This is on an Asus A7V133 mobo. The docs are not a great help to me (my ignorance) - any of the gurus with any suggestions?? TIA. *** If you find a solution and become attached to it, the solution may become your next problem. *** Powered by SuSE Linux 7.2 Professional Registered Linux User Lourens Steenkamp Republic of South Africa _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com