From: Alex Daniloff
Date: Sat, 23 Dec 2000 19:06:44 -0800
Message-Id: <00122319143700.06363@gate>
Subject: Annoing problem with xcdroast
Hello Linux folkz,
I got a recent problem with my Memorex CRW-1622 IDE CDRW .
When it fixating a CD after writing it gives this message:
Some error occured!!!
Please check process output
In the xcdroast panel I see these messages:
Cdrecord release 1.6.1 Copyright (C) 1995-1998 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,01,00'
scsibus: 1 target: 1 lun: 0
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'Memorex '
Identifikation : 'CRW-1622 '
Revision : 'D3.9'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Track 01: data 140 MB
Total size: 161 MB (15:57.49) = 71812 sectors
Lout start: 161 MB (15:59/37) = 71812 sectors
Current Secsize: -1
ATIP start of lead in: -11637 (97:26/63)
ATIP start of lead out: 337350 (75:00/00)
Disk type: Cyanine, AZO or similar
Manufacturer: CMC Magnetics Corporation
Blocks total: 337350 Blocks current: 337350 Blocks remaining: 265538
Starting to write CD/DVD at speed 2 in write mode for single session.
Waiting for reader process to fill input-buffer ... input-buffer ready.
Starting new track at sector: 0
Track 01: Total bytes read/written: 147066880/147066880 (71810 sectors).
Writing time: 488.389s
/usr/X11R6/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: Input/output error. close track/session: scsi sendcmd: retryable error
status: 0x2 (CHECK CONDITION)
CDB: 5B 00 02 00 00 00 00 00 00 00
Sense Bytes: F0 00 03 00 00 00 00 0A 00 01 9B 6E 02 F8 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0xF8 (no seek complete) [No matching qualifier] Fru 0x0
Sense flags: Blk 0 (valid)
cmd finished after 41.058s timeout 480s
/usr/X11R6/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: fifo had 4489 puts and 4489 gets.
/usr/X11R6/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: fifo was 0 times empty and 4346 times full, min fill was 97%.
Fixating time: 41.065s
In the log file I see these messages:
Dec 23 18:50:15 XCDR 0.96ex: started
Dec 23 18:50:20 XCDR 0.96ex: entering Copy Data-CD
Dec 23 18:50:51 XCDR 0.96ex: entering Copy Audio-CD
Dec 23 18:51:12 XCDR 0.96ex: entering Copy Audio-CD
Dec 23 18:51:26 XCDR 0.96ex: entering Master-CD
Dec 23 18:52:04 XCDR 0.96ex: entering Copy Data-CD
Dec 23 18:52:32 XCDR 0.96ex: entering Setup
Dec 23 18:52:38 XCDR 0.96ex: entering Copy Data-CD
Dec 23 18:52:58 XCDR 0.96ex: Write-Image from /data/cdimage/acad2k.raw, 147066880 bytes, dummy=0
Dec 23 18:52:58 XCDR 0.96ex: Executing:
/usr/X11R6/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1 -v speed=2 dev=1,01,00
-eject driver=mmc_cdr -data /data/cdimage/acad2k.raw Dec 23 19:02:04 XCDR
0.96ex: Write-Image: Some error occured
Could somebody help me please figure out what went wrong and how to fix it.
I've already screwed 5 CDs
Thank you in advance
Alex