Message-ID: <3A24038C.440E7B0@citeweb.net>
Date: Tue, 28 Nov 2000 20:12:12 +0100
From: charlie ti
Hi,
On Tue, Nov 28 2000 at 11:45 +0100, charlie ti wrote:
when i write a CD with X-CD-roast i've got this error message :
/usr/X11R6/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: Opération non permise. Cannot do mlockall(2).
Are you logged in as root?
Ciao, Stefan
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
i weren't root so it worked for a while and then another error message : Cdrecord release 1.6.1 Copyright (C) 1995-1998 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,01,00' scsibus: 0 target: 1 lun: 0 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'YAMAHA ' Identifikation : 'CRW4001 ' Revision : '1.0g' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Track 01: data 323 MB Total size: 371 MB (36:48.98) = 165674 sectors Lout start: 371 MB (36:50/74) = 165674 sectors Current Secsize: -1 ATIP info from disk: Indicated writing power: 6 Is not unrestricted Is not erasable Disk sub type: 6 ATIP start of lead in: -11231 (97:32/19) ATIP start of lead out: 335100 (74:30/00) Disk type: Phthalocyanine or similar Manufacturer: Prodisc Technology Inc. Blocks total: 335100 Blocks current: 335100 Blocks remaining: 169426 Starting to write CD/DVD at speed 4 in write mode for single session. Waiting for reader process to fill input-buffer ... input-buffer ready. Starting new track at sector: 0 /usr/X11R6/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: Input/output error. flush cache: scsi sendcmd: retryable error status: 0x2 (CHECK CONDITION) Track 01: Total bytes read/written: 339296256/339296256 (165672 sectors). CDB: 35 00 00 00 00 00 00 00 00 00 Sense Bytes: 70 00 04 B0 1C 33 BF 0A 00 00 00 00 09 00 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x09 Qual 0x00 (track following error) Fru 0x0 Sense flags: Blk -1340329025 (not valid) cmd finished after 5.516s timeout 120s Trouble flushing the cache Writing time: 565.751s /usr/X11R6/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: Input/output error. close track/session: scsi sendcmd: retryable error status: 0x2 (CHECK CONDITION) CDB: 5B 00 02 00 00 00 00 00 00 00 Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 31 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x31 Qual 0x00 (medium format corrupted) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.002s timeout 480s /usr/X11R6/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: fifo had 10355 puts and 10355 gets. /usr/X11R6/lib/xcdroast-0.96ex/bin/cdrecord-1.6.1: fifo was 0 times empty and 10168 times full, min fill was 97%. Fixating time: 0.004s thank's again charlie ti