Hi guys,
Output of 'ifconfig' whilst using the ISP that DOES work ok:
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
RX packets:837 errors:0 dropped:0 overruns:0 frame:0
TX packets:837 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
dummy0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
eth0 Link encap:Ethernet HWaddr 00:40:05:A5:E9:26
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9899 errors:0 dropped:0 overruns:0 frame:0
TX packets:8797 errors:0 dropped:0 overruns:0 carrier:0
collisions:155
Interrupt:9 Base address:0x240
ppp0 Link encap:Point-to-Point Protocol
inet addr:212.229.151.159 P-t-P:158.152.1.222 Mask:255.255.255.0
UP POINTOPOINT RUNNING MTU:1514 Metric:1
RX packets:5972 errors:0 dropped:0 overruns:0 frame:0
TX packets:6207 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
Memory:18d1038-18d1c20
On any other ISP:
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
RX packets:1197 errors:0 dropped:0 overruns:0 frame:0
TX packets:1197 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
dummy0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
eth0 Link encap:Ethernet HWaddr 00:40:05:A5:E9:26
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:21222 errors:0 dropped:0 overruns:0 frame:0
TX packets:19970 errors:0 dropped:0 overruns:0 carrier:0
collisions:217
Interrupt:9 Base address:0x240
Monday, October 09, 2000, 6:44:43 PM, you wrote:
jb> My /etc/hosts uses ppp0 not dummy, and works all of the time. Post the
jb> output of ifconfig.
jb> --- Lee Smallbone
Hi guys,
I have a real big problem with wvdial and route. :(
6 out of 7 ISPs I have in my /etc/wvdial.conf list (bearing in mind they all worked last week), now don't work. Only one of them works now, and only if I changed the number to a different POP.
When I connect using the number that works, I get the following output from 'route -n'
root@itchy:/home/lee > route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.1 0.0.0.0 255.255.255.255 UH 0 0 0 dummy0 158.152.1.222 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 27 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 17 lo 0.0.0.0 158.152.1.222 0.0.0.0 UG 0 0 31 ppp0
When I connect using any other ISP or any other number for the ISP that DOES work, I get:
root@itchy:/home/lee > route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.1 0.0.0.0 255.255.255.255 UH 0 0 0 dummy0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 29 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 17 lo
Also, I get on some ISPs
-->Starting pppd at Mon Oct 9 16:43:31 2000 -->PPP daemon has died! (exit code = 1) -->Disconnecting at Mon Oct 9 16:44:02 2000
What is going on? What has changed? Has anyone else had this problem? What can I do to fix it?
Thanks for your time in advance,
Best regards, Lee Smallbone lee@smallbone.com
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com
Also check the FAQ at http://www.suse.com/support/faq
jb> __________________________________________________ jb> Do You Yahoo!? jb> Yahoo! Photos - 35mm Quality Prints, Now Get 15 Free! jb> http://photos.yahoo.com/ Best regards, Lee mailto:lee@smallbone.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq