I got this same card to work with the stock driver from suse 6.4. had to reinstall to get it to work but it works. There ware 4 different chipsets out for this one card. I had to get a different set of drivers for mine to work under windows. I got 20 of these cards for work with the same chipset but the drivers disk was not right. if yours is the one with wake on lan capibilties then you need the delta driver diskett i think if i remember ritght. jack At 11:05 PM 8/5/2000 -0400, Mark Gray wrote:
Gary Kline
writes: On Sun, Aug 06, 2000 at 03:42:00AM +0200, Eduardo Carriles wrote:
Hi Gary,
First try: "modprobe tulip" and post the results, will see...
There has to be some hardware glitch, and I haven't the ability to check out the LinkSys board. The errors I get when trying to install the tulip module say:
"Device or resource busy"
This is exactly the error you get with the old driver -- get ahold of the latest drivers from Donald Becker -- apparently LinkSys has several different totally different cards on the market all being sold with the same name
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq
Jack Malone jack@malone.tyler.com http://www.ballistic.com/~jemalone Luke 4:18-19 "The Spirit of the Lord is on me, because he has anointed me to preach good news to the poor. He has sent me to proclaim freedom for the prisoners and recovery of sight for the blind, to release the oppressed, to proclaim the year of the Lord's favor." (NIV) -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq