Hi all, I went to set up a Samba print server today using 6.2. The box is an AST p90 with 24MB RAM. I put a 3com509 in the box and when I rebooted, I got the following message: /lib/modules/../3c509.o invalid parameter parm_io and the module failed to load. I looked in /etc/conf.modules and found: alias eth0 .... options 3c509 io=0x300 irq=10 as I configured it. I rebuilt the kernel and it didn't fix it. Neither did changing the card. Plug-n-pray is turned off and the card is configured at io=300 and irq=10. Anyone have an idea of what's wrong here? The card is a 3com509b TPO. Thanks in advance, Dennis "Custard pies are a sort of esperanto: a universal language." --Noel Godin -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/