Mailinglist Archive: opensuse-updates (199 mails)

< Previous Next >
openSUSE-SU-2019:1635-1: moderate: Security update for ansible
openSUSE Security Update: Security update for ansible
______________________________________________________________________________

Announcement ID: openSUSE-SU-2019:1635-1
Rating: moderate
References: #1109957 #1112959 #1118896 #1126503
Cross-References: CVE-2018-16837 CVE-2018-16859 CVE-2018-16876
CVE-2019-3828
Affected Products:
openSUSE Leap 42.3
openSUSE Leap 15.1
openSUSE Leap 15.0
openSUSE Backports SLE-15
SUSE Package Hub for SUSE Linux Enterprise 12
______________________________________________________________________________

An update that fixes four vulnerabilities is now available.

Description:

This update for ansible fixes the following issues:

Ansible was updated to version 2.8.1:

Full changelog is at /usr/share/doc/packages/ansible/changelogs/

- Bugfixes

- ACI - DO not encode query_string
- ACI modules - Fix non-signature authentication
- Add missing directory provided via ``--playbook-dir`` to adjacent
collection loading
- Fix "Interface not found" errors when using eos_l2_interface with
nonexistant interfaces configured
- Fix cannot get credential when `source_auth` set to `credential_file`.
- Fix netconf_config backup string issue
- Fix privilege escalation support for the docker connection plugin when
credentials need to be supplied (e.g. sudo with password).
- Fix vyos cli prompt inspection
- Fixed loading namespaced documentation fragments from collections.
- Fixing bug came up after running cnos_vrf module against coverity.
- Properly handle data importer failures on PVC creation, instead of
timing out.
- To fix the ios static route TC failure in CI
- To fix the nios member module params
- To fix the nios_zone module idempotency failure
- add terminal initial prompt for initial connection
- allow include_role to work with ansible command
- allow python_requirements_facts to report on dependencies containing
dashes
- asa_config fix
- azure_rm_roledefinition - fix a small error in build scope.
- azure_rm_virtualnetworkpeering - fix cross subscriptions virtual
network peering.
- cgroup_perf_recap - When not using file_per_task, make sure we don't
prematurely close the perf files
- display underlying error when reporting an invalid ``tasks:`` block.
- dnf - fix wildcard matching for state: absent
- docker connection plugin - accept version ``dev`` as 'newest version'
and print warning.
- docker_container - ``oom_killer`` and ``oom_score_adj`` options are
available since docker-py 1.8.0, not 2.0.0 as assumed by the version
check.
- docker_container - fix network creation when
``networks_cli_compatible`` is enabled.
- docker_container - use docker API's ``restart`` instead of
``stop``/``start`` to restart a container.
- docker_image - if ``build`` was not specified, the wrong default for
``build.rm`` is used.
- docker_image - if ``nocache`` set to ``yes`` but not
``build.nocache``, the module failed.
- docker_image - module failed when ``source: build`` was set but
``build.path`` options not specified.
- docker_network module - fix idempotency when using ``aux_addresses``
in ``ipam_config``.
- ec2_instance - make Name tag idempotent
- eos: don't fail modules without become set, instead show message and
continue
- eos_config: check for session support when asked to 'diff_against:
session'
- eos_eapi: fix idempotency issues when vrf was unspecified.
- fix bugs for ce - more info see
- fix incorrect uses of to_native that should be to_text instead.
- hcloud_volume - Fix idempotency when attaching a server to a volume.
- ibm_storage - Added a check for null fields in ibm_storage utils
module.
- include_tasks - whitelist ``listen`` as a valid keyword
- k8s - resource updates applied with force work correctly now
- keep results subset also when not no_log.
- meraki_switchport - improve reliability with native VLAN functionality.
- netapp_e_iscsi_target - fix netapp_e_iscsi_target chap secret size and
clearing functionality
- netapp_e_volumes - fix workload profileId indexing when no previous
workload tags exist on the storage array.
- nxos_acl some platforms/versions raise when no ACLs are present
- nxos_facts fix <https://github.com/ansible/ansible/pull/57009>
- nxos_file_copy fix passwordless workflow
- nxos_interface Fix admin_state check for n6k
- nxos_snmp_traps fix group all for N35 platforms
- nxos_snmp_user fix platform fixes for get_snmp_user
- nxos_vlan mode idempotence bug
- nxos_vlan vlan names containing regex ctl chars should be escaped
- nxos_vtp_* modules fix n6k issues
- openssl_certificate - fix private key passphrase handling for
``cryptography`` backend.
- openssl_pkcs12 - fixes crash when private key has a passphrase and the
module is run a second time.
- os_stack - Apply tags conditionally so that the module does not throw
up an error when using an older distro of openstacksdk
- pass correct loading context to persistent connections other than local
- pkg_mgr - Ansible 2.8.0 failing to install yum packages on Amazon Linux
- postgresql - added initial SSL related tests
- postgresql - added missing_required_libs, removed excess param mapping
- postgresql - move connect_to_db and get_pg_version into
module_utils/postgres.py
(https://github.com/ansible/ansible/pull/55514)
- postgresql_db - add note to the documentation about state dump and the
incorrect rc (https://github.com/ansible/ansible/pull/57297)
- postgresql_db - fix for postgresql_db fails if stderr contains output
- postgresql_ping - fixed a typo in the module documentation
- preserve actual ssh error when we cannot connect.
- route53_facts - the module did not advertise check mode support,
causing it not to be run in check mode.
- sysctl: the module now also checks the output of STDERR to report if
values are correctly set
(https://github.com/ansible/ansible/pull/55695)
- ufw - correctly check status when logging is off
- uri - always return a value for status even during failure
- urls - Handle redirects properly for IPv6 address by not splitting on
``:`` and rely on already parsed hostname and port values
- vmware_vm_facts - fix the support with regular ESXi
- vyos_interface fix <https://github.com/ansible/ansible/pull/57169>
- we don't really need to template vars on definition as we do this on
demand in templating.
- win_acl - Fix qualifier parser when using UNC paths -
- win_hostname - Fix non netbios compliant name handling
- winrm - Fix issue when attempting to parse CLIXML on send input failure
- xenserver_guest - fixed an issue where VM whould be powered off even
though check mode is used if reconfiguration requires VM to be powered
off.
- xenserver_guest - proper error message is shown when maximum number of
network interfaces is reached and multiple network interfaces are
added at
once.
- yum - Fix false error message about autoremove not being supported
- yum - fix failure when using ``update_cache`` standalone
- yum - handle special "_none_" value for proxy in yum.conf and .repo
files

Update to version 2.8.0

Major changes:

* Experimental support for Ansible Collections and content namespacing -
Ansible content can now be packaged in a collection and addressed via
namespaces. This allows for easier sharing, distribution, and
installation
of bundled modules/roles/plugins, and consistent rules for accessing
specific content via namespaces.
* Python interpreter discovery - The first time a Python module runs on
a target, Ansible will attempt to discover the proper default Python
interpreter to use for the target platform/version (instead of
immediately defaulting to /usr/bin/python). You can override this
behavior by setting ansible_python_interpreter or via config. (see
https://github.com/ansible/ansible/pull/50163)
* become - The deprecated CLI arguments for --sudo, --sudo-user,
--ask-sudo-pass, -su, --su-user, and --ask-su-pass have been removed,
in favor of the more generic --become, --become-user,
--become-method, and
--ask-become-pass.
* become - become functionality has been migrated to a plugin
architecture, to allow customization of become functionality and 3rd
party become methods (https://github.com/ansible/ansible/pull/50991)

- addresses CVE-2018-16859, CVE-2018-16876, CVE-2019-3828, CVE-2018-16837

For the full changelog see /usr/share/doc/packages/ansible/changelogs or
online:
https://github.com/ansible/ansible/blob/stable-2.8/changelogs/CHANGELOG-v2.
8.rst


Patch Instructions:

To install this openSUSE Security Update use the SUSE recommended
installation methods
like YaST online_update or "zypper patch".

Alternatively you can run the command listed for your product:

- openSUSE Leap 42.3:

zypper in -t patch openSUSE-2019-1635=1

- openSUSE Leap 15.1:

zypper in -t patch openSUSE-2019-1635=1

- openSUSE Leap 15.0:

zypper in -t patch openSUSE-2019-1635=1

- openSUSE Backports SLE-15:

zypper in -t patch openSUSE-2019-1635=1

- SUSE Package Hub for SUSE Linux Enterprise 12:

zypper in -t patch openSUSE-2019-1635=1



Package List:

- openSUSE Leap 42.3 (noarch):

ansible-2.8.1-12.1

- openSUSE Leap 15.1 (noarch):

ansible-2.8.1-lp151.2.3.1

- openSUSE Leap 15.0 (noarch):

ansible-2.8.1-lp150.2.6.1

- openSUSE Backports SLE-15 (noarch):

ansible-2.8.1-bp150.3.9.1

- SUSE Package Hub for SUSE Linux Enterprise 12 (noarch):

ansible-2.8.1-12.1


References:

https://www.suse.com/security/cve/CVE-2018-16837.html
https://www.suse.com/security/cve/CVE-2018-16859.html
https://www.suse.com/security/cve/CVE-2018-16876.html
https://www.suse.com/security/cve/CVE-2019-3828.html
https://bugzilla.suse.com/1109957
https://bugzilla.suse.com/1112959
https://bugzilla.suse.com/1118896
https://bugzilla.suse.com/1126503


< Previous Next >