Author: keichwa
Date: 2016-09-15 16:54:06 +0200 (Thu, 15 Sep 2016)
New Revision: 96925
Added:
branches/SLE12-SP2/yast/zh_CN/po/journalctl.zh_CN.po
Modified:
branches/SLE12-SP2/yast/zh_CN/po/add-on-creator.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/add-on.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/audit-laf.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/auth-client.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/auth-server.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/autoinst.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/base.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/bootloader.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/ca-management.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/cio.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/cluster.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/control-center.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/control.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/country.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/dhcp-server.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/dns-server.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/docker.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/drbd.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/fcoe-client.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/firewall-services.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/firewall.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/firstboot.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/ftp-server.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/geo-cluster.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/http-server.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/inetd.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/installation.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/instserver.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/iplb.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/iscsi-client.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/iscsi-lio-server.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/isns.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/journal.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/kdump.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/languages_db.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/ldap-client.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/ldap.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/linux-user-mgmt.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/mail.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/migration.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/multipath.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/network.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/nfs.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/nfs_server.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/nis.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/nis_server.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/ntp-client.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/online-update-configuration.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/online-update.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/packager.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/pam.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/pkg-bindings.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/printer.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/product-creator.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/proxy.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/rear.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/registration.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/relocation-server.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/rpm-groups.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/s390.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/samba-client.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/samba-server.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/samba-users.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/scanner.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/security.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/services-manager.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/slp-server.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/snapper.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/sound.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/squid.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/storage.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/sudo.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/support.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/sysconfig.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/tftp-server.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/timezone_db.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/tune.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/update.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/users.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/vm.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/vpn.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/wol.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/xpram.zh_CN.po
branches/SLE12-SP2/yast/zh_CN/po/yast2-apparmor.zh_CN.po
Log:
merged
Modified: branches/SLE12-SP2/yast/zh_CN/po/add-on-creator.zh_CN.po
===================================================================
--- branches/SLE12-SP2/yast/zh_CN/po/add-on-creator.zh_CN.po 2016-09-15 14:04:11 UTC (rev 96924)
+++ branches/SLE12-SP2/yast/zh_CN/po/add-on-creator.zh_CN.po 2016-09-15 14:54:06 UTC (rev 96925)
@@ -14,434 +14,427 @@
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#. Command line help text for the add-on-creator module
-#: src/clients/add-on-creator.rb:54
+#. Command line help text for the add-on-creator module
+#: src/clients/add-on-creator.rb:54
msgid "Creator for add-on products"
msgstr "外接式附件的创建者"
-#. command line help text for 'create' action
-#: src/clients/add-on-creator.rb:67
+#. command line help text for 'create' action
+#: src/clients/add-on-creator.rb:67
msgid "Create and build a new add-on product."
msgstr "创建新的外接式附件。"
-#. command line help text for 'clone' action
-#: src/clients/add-on-creator.rb:77
+#. command line help text for 'clone' action
+#: src/clients/add-on-creator.rb:77
msgid "Create and build a new add-on product based on an existing one."
msgstr "基于现有外接式附件创建新外接式附件。"
-#. command line help text for 'sign' action
-#: src/clients/add-on-creator.rb:87
+#. command line help text for 'sign' action
+#: src/clients/add-on-creator.rb:87
msgid "Sign unsigned Add-On Product"
msgstr "对未签名的附件产品签名"
-#. command line help text for 'list' action
-#: src/clients/add-on-creator.rb:97
+#. command line help text for 'list' action
+#: src/clients/add-on-creator.rb:97
msgid "List available add-on product configurations."
msgstr "列出可用的外接式附件配置。"
-#. command line help text for 'create' action
-#: src/clients/add-on-creator.rb:107
+#. command line help text for 'create' action
+#: src/clients/add-on-creator.rb:107
msgid "Build an add-on product from the selected configuration."
msgstr "基于选定的配置构建外接式附件。"
-#. command line help text for 'create' action
-#: src/clients/add-on-creator.rb:117
+#. command line help text for 'create' action
+#: src/clients/add-on-creator.rb:117
msgid "Delete the selected add-on product configuration."
msgstr "删除选中的外接式附件配置。"
-#. command line help text for 'rpm_dir' option
-#: src/clients/add-on-creator.rb:125
+#. command line help text for 'rpm_dir' option
+#: src/clients/add-on-creator.rb:125
msgid "Path to directory with packages"
msgstr "包含包的目录的路径"
-#. command line help text for 'content' option (do not translate 'content', it's a name)
-#: src/clients/add-on-creator.rb:132
+#. command line help text for 'content' option (do not translate 'content', it's a name)
+#: src/clients/add-on-creator.rb:132
msgid "Path to content file"
msgstr "内容文件的路径"
-#. command line help text for 'existing' option
-#: src/clients/add-on-creator.rb:139
+#. command line help text for 'existing' option
+#: src/clients/add-on-creator.rb:139
msgid "Path to directory with existing Add-On Product"
msgstr "包含现有附件产品的目录的路径"
-#. command line help text for 'generate_descriptions' option
-#: src/clients/add-on-creator.rb:146
+#. command line help text for 'generate_descriptions' option
+#: src/clients/add-on-creator.rb:146
msgid "Generate new package descriptions (do not copy)"
msgstr "生成新包说明（不复制）"
-#. command line help text for 'package_descriptions_dir' option
-#: src/clients/add-on-creator.rb:152
+#. command line help text for 'package_descriptions_dir' option
+#: src/clients/add-on-creator.rb:152
msgid "Path to directory with package descriptions"
msgstr "包含包说明的目录的路径"
-#. command line help text for 'patterns_dir' option
-#: src/clients/add-on-creator.rb:159
+#. command line help text for 'patterns_dir' option
+#: src/clients/add-on-creator.rb:159
msgid "Path to directory with patterns definitions"
msgstr "包含模式定义的目录的路径"
-#. command line help text for 'output_dir' option
-#: src/clients/add-on-creator.rb:166
+#. command line help text for 'output_dir' option
+#: src/clients/add-on-creator.rb:166
msgid "Path to the output directory"
msgstr "输出目录路径"
-#. command line help text for 'create_iso' option
-#: src/clients/add-on-creator.rb:173
+#. command line help text for 'create_iso' option
+#: src/clients/add-on-creator.rb:173
msgid "Create the ISO image"
msgstr "创建 ISO 映像"
-#. command line help text for 'iso_name' option
-#: src/clients/add-on-creator.rb:179
+#. command line help text for 'iso_name' option
+#: src/clients/add-on-creator.rb:179
msgid "Name of the output ISO image"
msgstr "输出 ISO 映像的名称"
-#. command line help text for 'output_dir' option
-#: src/clients/add-on-creator.rb:186
+#. command line help text for 'output_dir' option
+#: src/clients/add-on-creator.rb:186
msgid "Path to the output directory for ISO image"
msgstr "ISO 映像的输出目录的路径"
-#. command line help text for 'do_not_sign' option
-#: src/clients/add-on-creator.rb:193
+#. command line help text for 'do_not_sign' option
+#: src/clients/add-on-creator.rb:193
msgid "Do not sign the product"
msgstr "不对产品签名"
-#. command line help text for 'gpg_key' option
-#: src/clients/add-on-creator.rb:199
+#. command line help text for 'gpg_key' option
+#: src/clients/add-on-creator.rb:199
msgid "GPG key ID used to sign a product"
msgstr "用于对产品签名的 GPG 密钥 ID"
-#. command line help text for 'passphrase' option
-#: src/clients/add-on-creator.rb:206
+#. command line help text for 'passphrase' option
+#: src/clients/add-on-creator.rb:206
msgid "Passphrase to unlock GPG key"
msgstr "对 GPG 密钥解除锁定的通行口令"
-#. command line help text for 'passphrase_file' option
-#: src/clients/add-on-creator.rb:213
+#. command line help text for 'passphrase_file' option
+#: src/clients/add-on-creator.rb:213
msgid "Path to file with the passphrase for GPG key"
msgstr "包含 GPG 密钥的通行口令的文件的路径"
-#. command line help text for 'passphrase' option
-#: src/clients/add-on-creator.rb:220
+#. command line help text for 'passphrase' option
+#: src/clients/add-on-creator.rb:220
msgid "Resign all packages with selected key."
msgstr "用选定密钥为所有包重新签名。"
-#. command line help text for 'workflow' option
-#: src/clients/add-on-creator.rb:226
+#. command line help text for 'workflow' option
+#: src/clients/add-on-creator.rb:226
msgid "Path to workflow definition file (installation.xml)"
msgstr "工作流程定义文件 (installatioin.xml) 的路径"
-#. command line help text for 'y2update' option
-#: src/clients/add-on-creator.rb:233
+#. command line help text for 'y2update' option
+#: src/clients/add-on-creator.rb:233
msgid "Path to workflow dialogs archive (y2update.tgz)"
msgstr "工作流程对话档案 (y2update.tgz) 的路径"
-#. command line help text for 'y2update_packages_dir' option
-#: src/clients/add-on-creator.rb:240
+#. command line help text for 'y2update_packages_dir' option
+#: src/clients/add-on-creator.rb:240
msgid "Path to directory with YaST packages to form the workflow"
msgstr "包含用于构建工作流程的 YaST 包的目录的路径"
-#. command line help text for 'license' option
-#: src/clients/add-on-creator.rb:247
+#. command line help text for 'license' option
+#: src/clients/add-on-creator.rb:247
msgid "Path to file with license texts (license.zip or license.tar.gz)"
msgstr "含有许可文本的文件的路径（license.zip 或 license.tar.gz）"
-#. command line help text for 'info' option
-#: src/clients/add-on-creator.rb:254
+#. command line help text for 'info' option
+#: src/clients/add-on-creator.rb:254
msgid "Path to file with 'info' text (media.1/info.txt)"
msgstr "包含“info”文本的文件 (media.1/info.txt) 的路径"
-#. command line help text for 'extra_prov' option
-#: src/clients/add-on-creator.rb:261
+#. command line help text for 'extra_prov' option
+#: src/clients/add-on-creator.rb:261
msgid "Path to file with additional dependencies (EXTRA_PROV)"
msgstr "包含附加依赖性的文件 (EXTRA_PROV) 的路径"
-#. command line help text for 'addon-dir' option
-#: src/clients/add-on-creator.rb:268
+#. command line help text for 'addon-dir' option
+#: src/clients/add-on-creator.rb:268
msgid "Path to directory with Add-On Product"
msgstr "包含附件产品的目录的路径"
-#. command line help text for 'do_not_build' option
-#: src/clients/add-on-creator.rb:275
+#. command line help text for 'do_not_build' option
+#: src/clients/add-on-creator.rb:275
msgid "Do not build the product, only save new configuration."
msgstr "不构建产品，仅保存新的配置。"
-#. help text for 'number' option; do not translate 'list'
-#: src/clients/add-on-creator.rb:281
+#. help text for 'number' option; do not translate 'list'
+#: src/clients/add-on-creator.rb:281
msgid "Number of the selected add-on (see 'list' command for product numbers)."
msgstr "选中的外接式附件编号（用“list”命令查看产品编号）。"
-#. command line help text for 'changelog' option
-#: src/clients/add-on-creator.rb:288
+#. command line help text for 'changelog' option
+#: src/clients/add-on-creator.rb:288
msgid "Generate a Changelog file."
msgstr "生成更改日志文件。"
-#. command line help text for 'no_release_package' option
-#: src/clients/add-on-creator.rb:294
+#. command line help text for 'no_release_package' option
+#: src/clients/add-on-creator.rb:294
msgid "Do not generate the release package."
msgstr "不生成版本包。"
-#. command line help text for 'product_file' option
-#: src/clients/add-on-creator.rb:300
+#. command line help text for 'product_file' option
+#: src/clients/add-on-creator.rb:300
msgid "Path to file with the product description (*.prod)"
msgstr "带有产品描述的文件的路径 (*.prod)"
-#. error message, %1 is path
-#: src/clients/add-on-creator.rb:398
+#. error message, %1 is path
+#: src/clients/add-on-creator.rb:398
msgid "File %1 does not exist."
msgstr "文件 %1 不存在。"
-#. error message, %1 is path
-#: src/clients/add-on-creator.rb:405
+#. error message, %1 is path
+#: src/clients/add-on-creator.rb:405
msgid "Directory %1 does not exist."
msgstr "目录 %1 不存在。"
-#. question on command line
-#: src/clients/add-on-creator.rb:454
+#. question on command line
+#: src/clients/add-on-creator.rb:454
msgid "Passphrase for key %1:"
msgstr "密钥 %1 的通行口令："
-#. error message
-#: src/clients/add-on-creator.rb:475
+#. error message
+#: src/clients/add-on-creator.rb:475
msgid "Path to output directory is missing."
msgstr "缺少到输出目录的路径。"
-#. error message, missing tool
-#: src/clients/add-on-creator.rb:609
+#. error message, missing tool
+#: src/clients/add-on-creator.rb:609
msgid "/usr/bin/unzip does not exists"
msgstr "/usr/bin/unzip 不存在"
-#. error message
-#: src/clients/add-on-creator.rb:733
+#. error message
+#: src/clients/add-on-creator.rb:733
msgid "Path to directory with packages is missing."
msgstr "缺少到包含包的目录的路径。"
-#. error message
-#: src/clients/add-on-creator.rb:742
+#. error message
+#: src/clients/add-on-creator.rb:742
msgid "Path to content file is missing."
msgstr "缺少到内容文件的路径。"
-#. error message
-#: src/clients/add-on-creator.rb:756
+#. error message
+#: src/clients/add-on-creator.rb:756
msgid "Path to existing Add-On is missing."
msgstr "缺少到现有附件的路径。"
-#. error message
-#: src/clients/add-on-creator.rb:774
+#. error message
+#: src/clients/add-on-creator.rb:774
msgid "Path to directory with Add-On is missing."
msgstr "缺少到包含附件的目录的路径。"
-#. command line summary, %1 is order, %2 product name
-#: src/clients/add-on-creator.rb:813
+#. command line summary, %1 is order, %2 product name
+#: src/clients/add-on-creator.rb:813
msgid "(%1) Product Name: %2"
msgstr "(%1) 产品名：%2"
-#. command line summary
-#: src/clients/add-on-creator.rb:821
+#. command line summary
+#: src/clients/add-on-creator.rb:821
msgid "\tVersion: %1"
msgstr "\t版本：%1"
-#. command line summary
-#: src/clients/add-on-creator.rb:828
+#. command line summary
+#: src/clients/add-on-creator.rb:828
msgid "\tInput directory: %1"
msgstr "\t输入目录：%1"
-#: src/clients/add-on-creator.rb:834
+#: src/clients/add-on-creator.rb:834
msgid "\tOutput directory: %1"
msgstr "\t输出目录：%1"
-#. command line summary, %1 is comma-separated list
-#: src/clients/add-on-creator.rb:842
+#. command line summary, %1 is comma-separated list
+#: src/clients/add-on-creator.rb:842
msgid "\tPatterns: %1"
msgstr "\t模式：%1"
-#. command line message, do not translate 'create', 'clone'
-#: src/clients/add-on-creator.rb:864
-msgid ""
-"There is no add-on product configuration present. Create a new one using the "
-"'create' or 'clone' commands."
-msgstr ""
-"目前还没有外接式附件的配置。您可以使用“create”或者“clone”命令创建一个。"
+#. command line message, do not translate 'create', 'clone'
+#: src/clients/add-on-creator.rb:864
+msgid "There is no add-on product configuration present. Create a new one using the 'create' or 'clone' commands."
+msgstr "目前还没有外接式附件的配置。您可以使用“create”或者“clone”命令创建一个。"
-#. error message
-#: src/clients/add-on-creator.rb:876
+#. error message
+#: src/clients/add-on-creator.rb:876
msgid "Specify the add-on product to build."
msgstr "指定将要构建的外接式附件。"
-#. command line message
-#: src/clients/add-on-creator.rb:917
+#. command line message
+#: src/clients/add-on-creator.rb:917
msgid "There is no add-on product configuration present."
msgstr "目前还没有外接式附件的配置。"
-#. error message
-#: src/clients/add-on-creator.rb:924
+#. error message
+#: src/clients/add-on-creator.rb:924
msgid "Specify the add-on product configuration that should be deleted."
msgstr "指定需要删除的外接式附件配置。"
-#. dialog caption
-#: src/include/add-on-creator/complex.rb:99
+#. dialog caption
+#: src/include/add-on-creator/complex.rb:99
msgid "Add-on Creator Configuration Overview"
msgstr "附加创建程序配置概览"
-#. summary item
-#: src/include/add-on-creator/complex.rb:128
+#. summary item
+#: src/include/add-on-creator/complex.rb:128
msgid "Input directory: %1<br>"
msgstr "输入目录：%1<br>"
-#. summary item
-#: src/include/add-on-creator/complex.rb:133
+#. summary item
+#: src/include/add-on-creator/complex.rb:133
msgid "Output directory: %1<br>"
msgstr "输出目录：%1<br>"
-#. summary item, %1 is comma-separated list
-#: src/include/add-on-creator/complex.rb:142
+#. summary item, %1 is comma-separated list
+#: src/include/add-on-creator/complex.rb:142
msgid "Patterns: %1"
msgstr "模式：%1"
-#. help text
-#: src/include/add-on-creator/complex.rb:156
-msgid ""
-"<p>Start creating a new add-on product configuration with <b>Add</b>.</p>"
+#. help text
+#: src/include/add-on-creator/complex.rb:156
+msgid "<p>Start creating a new add-on product configuration with <b>Add</b>.</p>"
msgstr "<p>使用<b>添加</b>开始创建外接式附件配置。</p>"
-#. help text
-#: src/include/add-on-creator/complex.rb:160
-msgid ""
-"<p>Use <b>Edit</b> to modify the selected add-on product configuration.</p>"
+#. help text
+#: src/include/add-on-creator/complex.rb:160
+msgid "<p>Use <b>Edit</b> to modify the selected add-on product configuration.</p>"
msgstr "<p>使用<b>编辑</b>修改选定外接式附件配置。</p>"
-#. help text
-#: src/include/add-on-creator/complex.rb:164
+#. help text
+#: src/include/add-on-creator/complex.rb:164
msgid "<p>Delete the selected configuration using <b>Delete</b>.</p>"
msgstr "<p>要删除选定配置，请单击<b>删除</b>。</p>"
-#. help text
-#: src/include/add-on-creator/complex.rb:166
-msgid ""
-"<p>Build the new add-on product based on the selected configuration with "
-"<b>Build</b>.</p>"
+#. help text
+#: src/include/add-on-creator/complex.rb:166
+msgid "<p>Build the new add-on product based on the selected configuration with <b>Build</b>.</p>"
msgstr "<p>基于已选择的配置构建新的外接式附件，请单击<b>构建</b>。</p>"
-#. table header item
-#. summary header
-#: src/include/add-on-creator/complex.rb:178
-#: src/include/add-on-creator/complex.rb:2476
+#. table header item
+#. summary header
+#: src/include/add-on-creator/complex.rb:178
+#: src/include/add-on-creator/complex.rb:2476
msgid "Product Name"
msgstr "产品名称"
-#. table header item
-#. input field label
-#. desctiption of pattern keys
-#: src/include/add-on-creator/complex.rb:180
-#: src/include/add-on-creator/complex.rb:1272 src/modules/AddOnCreator.rb:316
+#. table header item
+#. input field label
+#. desctiption of pattern keys
+#: src/include/add-on-creator/complex.rb:180
+#: src/include/add-on-creator/complex.rb:1272 src/modules/AddOnCreator.rb:316
msgid "Version"
msgstr "版本"
-#. push button label
-#: src/include/add-on-creator/complex.rb:192
+#. push button label
+#: src/include/add-on-creator/complex.rb:192
msgid "&Build"
msgstr "构建(&B)"
-#. yes/no popup
-#: src/include/add-on-creator/complex.rb:247
+#. yes/no popup
+#: src/include/add-on-creator/complex.rb:247
msgid "Really delete configuration \"%1\"?"
msgstr "确实要删除配置“%1”吗？"
-#. dialog caption
-#. dialog caption
-#: src/include/add-on-creator/complex.rb:296
-#: src/include/add-on-creator/complex.rb:450
+#. dialog caption
+#. dialog caption
+#: src/include/add-on-creator/complex.rb:296
+#: src/include/add-on-creator/complex.rb:450
msgid "Add-On Product Creator"
msgstr "外接式附件创建程序"
-#. radio button label
-#: src/include/add-on-creator/complex.rb:313
+#. radio button label
+#: src/include/add-on-creator/complex.rb:313
msgid "Create an Add-On &from the Beginning"
msgstr "从头创建外接式附件(&F)"
-#. radio button label
-#: src/include/add-on-creator/complex.rb:322
+#. radio button label
+#: src/include/add-on-creator/complex.rb:322
msgid "Create an Add-On Based on an &Existing Add-On"
msgstr "根据现有外接式附件创建外接式附件(&E)"
-#. text entry label
-#: src/include/add-on-creator/complex.rb:332
+#. text entry label
+#: src/include/add-on-creator/complex.rb:332
msgid "&Path to Directory of the Existing Add-On Product"
msgstr "现有外接式附件的目录路径(&P)"
-#. checkbox label
-#: src/include/add-on-creator/complex.rb:343
+#. checkbox label
+#: src/include/add-on-creator/complex.rb:343
msgid "&Generate Package Descriptions"
msgstr "生成包说明(&G)"
-#. textentry label
-#: src/include/add-on-creator/complex.rb:460
+#. textentry label
+#: src/include/add-on-creator/complex.rb:460
msgid "&Add-On Product Label"
msgstr "外接式附件标签(&A)"
-#. textentry label
-#. text entry label
-#: src/include/add-on-creator/complex.rb:464
-#: src/include/add-on-creator/patterns.rb:126
+#. textentry label
+#. text entry label
+#: src/include/add-on-creator/complex.rb:464
+#: src/include/add-on-creator/patterns.rb:126
msgid "&Version"
msgstr "版本(&V)"
-#: src/include/add-on-creator/complex.rb:468
+#: src/include/add-on-creator/complex.rb:468
msgid "Required Product"
msgstr "必需产品"
-#. radio button label
-#: src/include/add-on-creator/complex.rb:483
+#. radio button label
+#: src/include/add-on-creator/complex.rb:483
msgid "SUSE &Linux Enterprise Server 11"
msgstr "SUSE Linux Enterprise Server 11(&L)"
-#. radio button label
-#: src/include/add-on-creator/complex.rb:492
+#. radio button label
+#: src/include/add-on-creator/complex.rb:492
msgid "SUSE L&inux Enterprise Desktop 11"
msgstr "SUSE Linux Enterprise Desktop 11(&I)"
-#. radio button label
-#: src/include/add-on-creator/complex.rb:501
+#. radio button label
+#: src/include/add-on-creator/complex.rb:501
msgid "S&USE Linux Enterprise 11"
msgstr "SUSE Linux Enterprise 11(&U)"
-#. radio button label
-#: src/include/add-on-creator/complex.rb:510
+#. radio button label
+#: src/include/add-on-creator/complex.rb:510
msgid "SUSE Linux Enterprise 11 SP3"
msgstr "SUSE Linux Enterprise 11 SP3"
-#. radio button label
-#: src/include/add-on-creator/complex.rb:519
+#. radio button label
+#: src/include/add-on-creator/complex.rb:519
msgid "openSUSE 12.&3"
msgstr "OpenSUSE 12.&3"
-#. radio button label
-#: src/include/add-on-creator/complex.rb:528
+#. radio button label
+#: src/include/add-on-creator/complex.rb:528
msgid "openSUSE 13.1"
msgstr "OpenSUSE 13.1"
-#. radio button label
-#: src/include/add-on-creator/complex.rb:538
+#. radio button label
+#: src/include/add-on-creator/complex.rb:538
msgid "&Other"
msgstr "其它(&O)"
-#. text entry label
-#: src/include/add-on-creator/complex.rb:556
+#. text entry label
+#: src/include/add-on-creator/complex.rb:556
msgid "&Path to Directory with Add-On Packages"
msgstr "附加包目录的路径(&P)"
-#. text entry label
-#: src/include/add-on-creator/complex.rb:566
+#. text entry label
+#: src/include/add-on-creator/complex.rb:566
msgid "Path to Directory with Re&quired Product Packages"
msgstr "必需产品包目录的路径(&Q)"
-#. error popup
-#. error popup
-#: src/include/add-on-creator/complex.rb:639
-#: src/include/add-on-creator/complex.rb:647
+#. error popup
+#. error popup
+#: src/include/add-on-creator/complex.rb:639
+#: src/include/add-on-creator/complex.rb:647
msgid "Directory %1 is not accessible."
msgstr "目录 %1 无法访问。"
-#. error popup (input validation failed)
-#: src/include/add-on-creator/complex.rb:726
+#. error popup (input validation failed)
+#: src/include/add-on-creator/complex.rb:726
msgid ""
"The value of NAME may contain only\n"
"letters, numbers, and the characters \".~_-\"."
@@ -449,126 +442,126 @@
"NAME 的值只能含有\n"
"字母、数字和字符“.~_-”。"
-#: src/include/add-on-creator/complex.rb:756
+#: src/include/add-on-creator/complex.rb:756
msgid "LABEL"
msgstr "标签"
-#. combo label
-#: src/include/add-on-creator/complex.rb:758
+#. combo label
+#: src/include/add-on-creator/complex.rb:758
msgid "La&nguage Code"
msgstr "语言代码(&N)"
-#. textentry label
-#. textentry label
-#. textentry label
-#: src/include/add-on-creator/complex.rb:760
-#: src/include/add-on-creator/complex.rb:1546
-#: src/include/add-on-creator/patterns.rb:172
+#. textentry label
+#. textentry label
+#. textentry label
+#: src/include/add-on-creator/complex.rb:760
+#: src/include/add-on-creator/complex.rb:1546
+#: src/include/add-on-creator/patterns.rb:172
msgid "&Value"
msgstr "值(&V)"
-#. Heading for help popup window
-#. Heading for help popup window
-#. Heading for help popup window
-#: src/include/add-on-creator/complex.rb:779
-#: src/include/add-on-creator/complex.rb:1454
-#: src/include/add-on-creator/patterns.rb:246
+#. Heading for help popup window
+#. Heading for help popup window
+#. Heading for help popup window
+#: src/include/add-on-creator/complex.rb:779
+#: src/include/add-on-creator/complex.rb:1454
+#: src/include/add-on-creator/patterns.rb:246
msgid "Help"
msgstr "帮助"
-#. dialog caption - 'content' is file name
-#: src/include/add-on-creator/complex.rb:804
+#. dialog caption - 'content' is file name
+#: src/include/add-on-creator/complex.rb:804
msgid "Product Definition"
msgstr "产品定义"
-#. label
-#: src/include/add-on-creator/complex.rb:896
+#. label
+#: src/include/add-on-creator/complex.rb:896
msgid "Content File"
msgstr "内容文件"
-#. table header
-#. table header
-#: src/include/add-on-creator/complex.rb:902
-#: src/include/add-on-creator/complex.rb:941
+#. table header
+#. table header
+#: src/include/add-on-creator/complex.rb:902
+#: src/include/add-on-creator/complex.rb:941
msgid "Key"
msgstr "键"
-#. table header
-#. table header
-#. table header 2/2
-#. table header 2/2
-#: src/include/add-on-creator/complex.rb:904
-#: src/include/add-on-creator/complex.rb:943
-#: src/include/add-on-creator/complex.rb:1766
-#: src/include/add-on-creator/patterns.rb:355
+#. table header
+#. table header
+#. table header 2/2
+#. table header 2/2
+#: src/include/add-on-creator/complex.rb:904
+#: src/include/add-on-creator/complex.rb:943
+#: src/include/add-on-creator/complex.rb:1766
+#: src/include/add-on-creator/patterns.rb:355
msgid "Value"
msgstr "值"
-#. table header
-#. table header
-#. label for 'Des' pattern key
-#. label for 'Des' key
-#: src/include/add-on-creator/complex.rb:906
-#: src/include/add-on-creator/complex.rb:945 src/modules/AddOnCreator.rb:351
-#: src/modules/AddOnCreator.rb:579
+#. table header
+#. table header
+#. label for 'Des' pattern key
+#. label for 'Des' key
+#: src/include/add-on-creator/complex.rb:906
+#: src/include/add-on-creator/complex.rb:945 src/modules/AddOnCreator.rb:351
+#: src/modules/AddOnCreator.rb:579
msgid "Description"
msgstr "描述"
-#. push button label
-#. button label
-#. button label
-#. button label
-#: src/include/add-on-creator/complex.rb:914
-#: src/include/add-on-creator/dialogs.rb:187
-#: src/include/add-on-creator/dialogs.rb:488
-#: src/include/add-on-creator/dialogs.rb:730
+#. push button label
+#. button label
+#. button label
+#. button label
+#: src/include/add-on-creator/complex.rb:914
+#: src/include/add-on-creator/dialogs.rb:187
+#: src/include/add-on-creator/dialogs.rb:488
+#: src/include/add-on-creator/dialogs.rb:730
msgid "Im&port"
msgstr "导入(&P)"
-#. checkbox label
-#: src/include/add-on-creator/complex.rb:920
+#. checkbox label
+#: src/include/add-on-creator/complex.rb:920
msgid "Show &Only Required Keywords"
msgstr "只显示必需关键字(&O)"
-#. check box label
-#: src/include/add-on-creator/complex.rb:930
+#. check box label
+#: src/include/add-on-creator/complex.rb:930
msgid "Generate Release Package"
msgstr "生成版本包"
-#. label
-#: src/include/add-on-creator/complex.rb:935
+#. label
+#: src/include/add-on-creator/complex.rb:935
msgid "Product File"
msgstr "产品文件"
-#. push button label
-#. push button label
-#. button label
-#. button label
-#. button label
-#. button label
-#. button label
-#: src/include/add-on-creator/complex.rb:952
-#: src/include/add-on-creator/complex.rb:1590
-#: src/include/add-on-creator/complex.rb:1744
-#: src/include/add-on-creator/dialogs.rb:157
-#: src/include/add-on-creator/dialogs.rb:461
-#: src/include/add-on-creator/dialogs.rb:718
-#: src/include/add-on-creator/patterns.rb:342
+#. push button label
+#. push button label
+#. button label
+#. button label
+#. button label
+#. button label
+#. button label
+#: src/include/add-on-creator/complex.rb:952
+#: src/include/add-on-creator/complex.rb:1590
+#: src/include/add-on-creator/complex.rb:1744
+#: src/include/add-on-creator/dialogs.rb:157
+#: src/include/add-on-creator/dialogs.rb:461
+#: src/include/add-on-creator/dialogs.rb:718
+#: src/include/add-on-creator/patterns.rb:342
msgid "I&mport"
msgstr "导入(&M)"
-#. popup for file selection dialog
-#: src/include/add-on-creator/complex.rb:1024
+#. popup for file selection dialog
+#: src/include/add-on-creator/complex.rb:1024
msgid "Choose the Existing Content File"
msgstr "选择现有内容文件"
-#. popup for file selection dialog
-#: src/include/add-on-creator/complex.rb:1071
+#. popup for file selection dialog
+#: src/include/add-on-creator/complex.rb:1071
msgid "Choose the Existing Product File"
msgstr "选择现有产品文件"
-#. error popup
-#: src/include/add-on-creator/complex.rb:1090
+#. error popup
+#: src/include/add-on-creator/complex.rb:1090
msgid ""
"Enter the values for these items:\n"
"%1"
@@ -576,121 +569,121 @@
"输入以下项的值：\n"
"%1"
-#. table item
-#: src/include/add-on-creator/complex.rb:1148
+#. table item
+#: src/include/add-on-creator/complex.rb:1148
msgid "Yes"
msgstr "是"
-#. table item
-#: src/include/add-on-creator/complex.rb:1150
+#. table item
+#: src/include/add-on-creator/complex.rb:1150
msgid "No"
msgstr "否"
-#. textentry label
-#: src/include/add-on-creator/complex.rb:1171
+#. textentry label
+#: src/include/add-on-creator/complex.rb:1171
msgid "Value of \"%1\""
msgstr "“%1”的值"
-#. input field label
-#: src/include/add-on-creator/complex.rb:1262
+#. input field label
+#: src/include/add-on-creator/complex.rb:1262
msgid "Name"
msgstr "名称"
-#. combo box label
-#: src/include/add-on-creator/complex.rb:1282
+#. combo box label
+#: src/include/add-on-creator/complex.rb:1282
msgid "Flag"
msgstr "标志"
-#. combo box item
-#: src/include/add-on-creator/complex.rb:1285
+#. combo box item
+#: src/include/add-on-creator/complex.rb:1285
msgid "Equal"
msgstr "等于"
-#. combo box item
-#: src/include/add-on-creator/complex.rb:1287
+#. combo box item
+#: src/include/add-on-creator/complex.rb:1287
msgid "Greater than"
msgstr "高于"
-#. combo box item
-#: src/include/add-on-creator/complex.rb:1289
+#. combo box item
+#: src/include/add-on-creator/complex.rb:1289
msgid "Lower than"
msgstr "低于"
-#. input field label
-#: src/include/add-on-creator/complex.rb:1300 src/modules/AddOnCreator.rb:322
+#. input field label
+#: src/include/add-on-creator/complex.rb:1300 src/modules/AddOnCreator.rb:322
msgid "Release"
msgstr "发行版"
-#. input field label
-#: src/include/add-on-creator/complex.rb:1310
+#. input field label
+#: src/include/add-on-creator/complex.rb:1310
msgid "Flavor"
msgstr "风格"
-#. input field label
-#. table item label
-#: src/include/add-on-creator/complex.rb:1320 src/modules/AddOnCreator.rb:735
+#. input field label
+#. table item label
+#: src/include/add-on-creator/complex.rb:1320 src/modules/AddOnCreator.rb:735
msgid "Patch level"
msgstr "增补程序级别"
-#. MultiSelectionBox label
-#: src/include/add-on-creator/complex.rb:1414
+#. MultiSelectionBox label
+#: src/include/add-on-creator/complex.rb:1414
msgid "&Packages"
msgstr "包(&P)"
-#. check box label
-#: src/include/add-on-creator/complex.rb:1417
+#. check box label
+#: src/include/add-on-creator/complex.rb:1417
msgid "Select or Deselect &All"
msgstr "全选或全部取消选择(&A)"
-#. popup for file selection dialog
-#: src/include/add-on-creator/complex.rb:1611
+#. popup for file selection dialog
+#: src/include/add-on-creator/complex.rb:1611
msgid "Choose the file with the text to be imported."
msgstr "选择含有要导入的文本的文件。"
-#. dialog caption
-#: src/include/add-on-creator/complex.rb:1633
+#. dialog caption
+#: src/include/add-on-creator/complex.rb:1633
msgid "Package Descriptions"
msgstr "包说明"
-#. combobox label
-#. combobox label
-#: src/include/add-on-creator/complex.rb:1695
-#: src/include/add-on-creator/complex.rb:1731
+#. combobox label
+#. combobox label
+#: src/include/add-on-creator/complex.rb:1695
+#: src/include/add-on-creator/complex.rb:1731
msgid "Description File &Language Code"
msgstr "说明文件语言代码(&L)"
-#. button label
-#. button label
-#: src/include/add-on-creator/complex.rb:1704
-#: src/include/add-on-creator/complex.rb:1741
+#. button label
+#. button label
+#: src/include/add-on-creator/complex.rb:1704
+#: src/include/add-on-creator/complex.rb:1741
msgid "Add Lan&guage"
msgstr "添加语言(&G)"
-#. table header
-#. label for 'Pkg' key
-#: src/include/add-on-creator/complex.rb:1754 src/modules/AddOnCreator.rb:575
+#. table header
+#. label for 'Pkg' key
+#: src/include/add-on-creator/complex.rb:1754 src/modules/AddOnCreator.rb:575
msgid "Package"
msgstr "包"
-#. table header 1/2
-#. table header 1/2
-#: src/include/add-on-creator/complex.rb:1764
-#: src/include/add-on-creator/patterns.rb:353
+#. table header 1/2
+#. table header 1/2
+#: src/include/add-on-creator/complex.rb:1764
+#: src/include/add-on-creator/patterns.rb:353
msgid "Attribute"
msgstr "特性"
-#. textentry label
-#: src/include/add-on-creator/complex.rb:1782
+#. textentry label
+#: src/include/add-on-creator/complex.rb:1782
msgid "Location of the File with Additional &Dependencies"
msgstr "包含附加依赖性的文件的位置(&D)"
-#. popup for file selection dialog
-#: src/include/add-on-creator/complex.rb:1896
+#. popup for file selection dialog
+#: src/include/add-on-creator/complex.rb:1896
msgid "Choose the New Package Description File"
msgstr "选择新包说明文件"
-#. error popup (correct name is 'packages.*')
-#: src/include/add-on-creator/complex.rb:1909
+#. error popup (correct name is 'packages.*')
+#: src/include/add-on-creator/complex.rb:1909
msgid ""
"The package description file is named incorrectly.\n"
"Choose another one."
@@ -698,13 +691,13 @@
"包说明文件命名错误。\n"
"请选择其他名称。"
-#. popup for file selection dialog
-#: src/include/add-on-creator/complex.rb:2044
+#. popup for file selection dialog
+#: src/include/add-on-creator/complex.rb:2044
msgid "Choose the Path to EXTRA_PROV File"
msgstr "选择 EXTRA_PROV 文件的路径"
-#. error popup
-#: src/include/add-on-creator/complex.rb:2054
+#. error popup
+#: src/include/add-on-creator/complex.rb:2054
msgid ""
"The file '%1' does not exist.\n"
"Choose another one."
@@ -712,60 +705,60 @@
"文件“%1”不存在。\n"
"请选择另一个文件。"
-#. frame label
-#: src/include/add-on-creator/complex.rb:2090
+#. frame label
+#: src/include/add-on-creator/complex.rb:2090
msgid "Key Type"
msgstr "密钥类型"
-#. radiobutton label (key type)
-#: src/include/add-on-creator/complex.rb:2104
+#. radiobutton label (key type)
+#: src/include/add-on-creator/complex.rb:2104
msgid "&DSA"
msgstr "DSA(&D)"
-#. radiobutton label (key type)
-#: src/include/add-on-creator/complex.rb:2109
+#. radiobutton label (key type)
+#: src/include/add-on-creator/complex.rb:2109
msgid "&RSA"
msgstr "RSA(&R)"
-#. textentry label
-#: src/include/add-on-creator/complex.rb:2119
+#. textentry label
+#: src/include/add-on-creator/complex.rb:2119
msgid "Key &Size"
msgstr "密钥大小(&S)"
-#. textentry label
-#: src/include/add-on-creator/complex.rb:2124
+#. textentry label
+#: src/include/add-on-creator/complex.rb:2124
msgid "E&xpiration Date"
msgstr "失效日期(&X)"
-#. textentry label
-#: src/include/add-on-creator/complex.rb:2127
+#. textentry label
+#: src/include/add-on-creator/complex.rb:2127
msgid "&Name"
msgstr "名称(&N)"
-#. textentry label
-#: src/include/add-on-creator/complex.rb:2129
+#. textentry label
+#: src/include/add-on-creator/complex.rb:2129
msgid "Commen&t"
msgstr "注释(&T)"
-#. textentry label
-#: src/include/add-on-creator/complex.rb:2134
+#. textentry label
+#: src/include/add-on-creator/complex.rb:2134
msgid "E-&Mail Address"
msgstr "电子邮件地址(&M)"
-#. password widget label
-#. password entry label
-#: src/include/add-on-creator/complex.rb:2137
-#: src/include/add-on-creator/complex.rb:2251
+#. password widget label
+#. password entry label
+#: src/include/add-on-creator/complex.rb:2137
+#: src/include/add-on-creator/complex.rb:2251
msgid "&Passphrase"
msgstr "通行口令(&P)"
-#. dialog caption
-#: src/include/add-on-creator/complex.rb:2144
+#. dialog caption
+#: src/include/add-on-creator/complex.rb:2144
msgid "New GPG Key"
msgstr "新建 GPG 密钥"
-#. error popup (see Name, Comment, Email Adress text entries
-#: src/include/add-on-creator/complex.rb:2189
+#. error popup (see Name, Comment, Email Adress text entries
+#: src/include/add-on-creator/complex.rb:2189
msgid ""
"Name, comment, and e-mail address values are empty.\n"
"You must enter at least one of them to provide user identification.\n"
@@ -773,13 +766,13 @@
"名称、注释和电子邮件地址值为空。\n"
"必须至少输入三个值中的其中一个以提供用户标识。\n"
-#. feedback popup headline
-#: src/include/add-on-creator/complex.rb:2197
+#. feedback popup headline
+#: src/include/add-on-creator/complex.rb:2197
msgid "Generating Primary Key Pair"
msgstr "生成主密钥对"
-#. feedback message
-#: src/include/add-on-creator/complex.rb:2199
+#. feedback message
+#: src/include/add-on-creator/complex.rb:2199
msgid ""
"If it takes too long, do some other work to give\n"
"the OS a chance to collect more entropy.\n"
@@ -787,103 +780,103 @@
"如果费时太长，做些其他工作，让\n"
"操作系统有机会收集更多 entropy。\n"
-#. dialog caption
-#: src/include/add-on-creator/complex.rb:2217
+#. dialog caption
+#: src/include/add-on-creator/complex.rb:2217
msgid "Signing the Add-On Product"
msgstr "注册外接式附件"
-#. combo box label
-#: src/include/add-on-creator/complex.rb:2237
+#. combo box label
+#: src/include/add-on-creator/complex.rb:2237
msgid "GPG &Key ID"
msgstr "GPG 密钥标识(&K)"
-#. button label
-#: src/include/add-on-creator/complex.rb:2244
+#. button label
+#: src/include/add-on-creator/complex.rb:2244
msgid "&Create..."
msgstr "创建(&C)..."
-#. password entry label (verification)
-#: src/include/add-on-creator/complex.rb:2258
+#. password entry label (verification)
+#: src/include/add-on-creator/complex.rb:2258
msgid "&Passphrase Verification"
msgstr "通行口令验证(&P)"
-#. checkbox label
-#: src/include/add-on-creator/complex.rb:2265
+#. checkbox label
+#: src/include/add-on-creator/complex.rb:2265
msgid "Re&sign all packages with selected key."
msgstr "用选定密钥为所有包重新签名(&S)"
-#. error message
-#: src/include/add-on-creator/complex.rb:2302
+#. error message
+#: src/include/add-on-creator/complex.rb:2302
msgid "Passwords do not match. Try again."
msgstr "口令不匹配。请重试。"
-#. dialog caption
-#: src/include/add-on-creator/complex.rb:2334
+#. dialog caption
+#: src/include/add-on-creator/complex.rb:2334
msgid "Output Settings"
msgstr "输出设置"
-#. text entry label
-#: src/include/add-on-creator/complex.rb:2358
+#. text entry label
+#: src/include/add-on-creator/complex.rb:2358
msgid "P&ath to Output Directory"
msgstr "输出目录的路径(&A)"
-#. check box label
-#: src/include/add-on-creator/complex.rb:2364
+#. check box label
+#: src/include/add-on-creator/complex.rb:2364
msgid "Create &ISO Image"
msgstr "创建 ISO 映像(&I)"
-#. text entry label
-#: src/include/add-on-creator/complex.rb:2371
+#. text entry label
+#: src/include/add-on-creator/complex.rb:2371
msgid "Image File Name"
msgstr "映象文件名"
-#. check box label
-#: src/include/add-on-creator/complex.rb:2377
+#. check box label
+#: src/include/add-on-creator/complex.rb:2377
msgid "&Generate Changelog"
msgstr "生成更改日志(&G)"
-#. button label
-#: src/include/add-on-creator/complex.rb:2382
+#. button label
+#: src/include/add-on-creator/complex.rb:2382
msgid "&Configure Workflow..."
msgstr "配置工作流(&C)..."
-#. button label
-#: src/include/add-on-creator/complex.rb:2384
+#. button label
+#: src/include/add-on-creator/complex.rb:2384
msgid "O&ptional Files..."
msgstr "可选文件(&P)..."
-#. error popup
-#: src/include/add-on-creator/complex.rb:2429
+#. error popup
+#: src/include/add-on-creator/complex.rb:2429
msgid "Enter the path to the directory for the add-on."
msgstr "输入附加的目录路径。"
-#. dialog caption
-#: src/include/add-on-creator/complex.rb:2469
+#. dialog caption
+#: src/include/add-on-creator/complex.rb:2469
msgid "Overview"
msgstr "概述"
-#. summary header
-#: src/include/add-on-creator/complex.rb:2480
+#. summary header
+#: src/include/add-on-creator/complex.rb:2480
msgid "Patterns"
msgstr "模式"
-#. summary header
-#: src/include/add-on-creator/complex.rb:2488
+#. summary header
+#: src/include/add-on-creator/complex.rb:2488
msgid "Input Directory"
msgstr "输入目录"
-#. summary header
-#: src/include/add-on-creator/complex.rb:2495
+#. summary header
+#: src/include/add-on-creator/complex.rb:2495
msgid "Output Directory"
msgstr "输出目录"
-#. summary line
-#: src/include/add-on-creator/complex.rb:2505
+#. summary line
+#: src/include/add-on-creator/complex.rb:2505
msgid "Creating an ISO image in the output directory"
msgstr "正在输出目录中创建 ISO 映像"
-#. popup message
-#: src/include/add-on-creator/dialogs.rb:79
+#. popup message
+#: src/include/add-on-creator/dialogs.rb:79
msgid ""
"A file with this name already exists.\n"
"Choose a different one."
@@ -891,154 +884,154 @@
"该名称的文件已存在。\n"
"请选择其他名称。"
-#. dialog caption
-#: src/include/add-on-creator/dialogs.rb:98
+#. dialog caption
+#: src/include/add-on-creator/dialogs.rb:98
msgid "Expert Settings"
msgstr "专家设置"
-#: src/include/add-on-creator/dialogs.rb:136
+#: src/include/add-on-creator/dialogs.rb:136
msgid "&info.txt File"
msgstr "info.txt 文件(&I)"
-#. frame label
-#: src/include/add-on-creator/dialogs.rb:141
+#. frame label
+#: src/include/add-on-creator/dialogs.rb:141
msgid "&License Files"
msgstr "许可文件(&L)"
-#. frame label
-#: src/include/add-on-creator/dialogs.rb:171
+#. frame label
+#: src/include/add-on-creator/dialogs.rb:171
msgid "README Files"
msgstr "README 文件"
-#. textentry label
-#: src/include/add-on-creator/dialogs.rb:241
+#. textentry label
+#: src/include/add-on-creator/dialogs.rb:241
msgid "&Name of the New README File"
msgstr "新 README 文件的名称(&N)"
-#. popup for file selection dialog
-#: src/include/add-on-creator/dialogs.rb:258
+#. popup for file selection dialog
+#: src/include/add-on-creator/dialogs.rb:258
msgid "Choose the New README File"
msgstr "选择新的 README 文件"
-#. textentry label
-#: src/include/add-on-creator/dialogs.rb:300
+#. textentry label
+#: src/include/add-on-creator/dialogs.rb:300
msgid "&Language for the New License File"
msgstr "新的许可文件的语言(&L)"
-#. popup for file selection dialog
-#: src/include/add-on-creator/dialogs.rb:320
+#. popup for file selection dialog
+#: src/include/add-on-creator/dialogs.rb:320
msgid "Choose the New License File"
msgstr "选择新的许可文件"
-#. dialog caption
-#: src/include/add-on-creator/dialogs.rb:401
+#. dialog caption
+#: src/include/add-on-creator/dialogs.rb:401
msgid "Expert Settings, Part 2"
msgstr "专家设置，第 2 部分"
-#. frame label
-#: src/include/add-on-creator/dialogs.rb:445
+#. frame label
+#: src/include/add-on-creator/dialogs.rb:445
msgid "©ING Files"
msgstr "正在复制文件(&C)"
-#. frame label
-#: src/include/add-on-creator/dialogs.rb:472
+#. frame label
+#: src/include/add-on-creator/dialogs.rb:472
msgid "COPY&RIGHT Files"
msgstr "版权文件(&R)"
-#. textentry label
-#: src/include/add-on-creator/dialogs.rb:541
+#. textentry label
+#: src/include/add-on-creator/dialogs.rb:541
msgid "&Language for the New COPYRIGHT File"
msgstr "新的版权文件的语言(&L)"
-#. popup for file selection dialog
-#: src/include/add-on-creator/dialogs.rb:560
+#. popup for file selection dialog
+#: src/include/add-on-creator/dialogs.rb:560
msgid "Choose the New COPYRIGHT File"
msgstr "选择新的版权文件"
-#. textentry label
-#: src/include/add-on-creator/dialogs.rb:605
+#. textentry label
+#: src/include/add-on-creator/dialogs.rb:605
msgid "&Language for the New COPYING File"
msgstr "新的复制中文件的语言(&L)"
-#. popup for file selection dialog
-#: src/include/add-on-creator/dialogs.rb:624
+#. popup for file selection dialog
+#: src/include/add-on-creator/dialogs.rb:624
msgid "Choose the New COPYING File"
msgstr "选择新的复制中文件"
-#. dialog caption
-#: src/include/add-on-creator/dialogs.rb:701
+#. dialog caption
+#: src/include/add-on-creator/dialogs.rb:701
msgid "Expert Settings, Part 3"
msgstr "专家设置，第 3 部分"
-#: src/include/add-on-creator/dialogs.rb:715
+#: src/include/add-on-creator/dialogs.rb:715
msgid "products"
msgstr "产品"
-#: src/include/add-on-creator/dialogs.rb:721
+#: src/include/add-on-creator/dialogs.rb:721
msgid "patches"
msgstr "补丁"
-#. button label
-#: src/include/add-on-creator/dialogs.rb:724
+#. button label
+#: src/include/add-on-creator/dialogs.rb:724
msgid "&Import"
msgstr "导入(&I)"
-#: src/include/add-on-creator/dialogs.rb:727
+#: src/include/add-on-creator/dialogs.rb:727
msgid "media"
msgstr "媒体"
-#. dialog caption
-#: src/include/add-on-creator/dialogs.rb:769
+#. dialog caption
+#: src/include/add-on-creator/dialogs.rb:769
msgid "Workflow Configuration"
msgstr "工作流程配置"
-#. textentry label
-#: src/include/add-on-creator/dialogs.rb:792
+#. textentry label
+#: src/include/add-on-creator/dialogs.rb:792
msgid "&Location of the File with the Workflow Description"
msgstr "工作流程说明文件的位置(&L)"
-#. radiobutton label
-#: src/include/add-on-creator/dialogs.rb:806
+#. radiobutton label
+#: src/include/add-on-creator/dialogs.rb:806
msgid "&No Additional YaST Modules"
msgstr "无其他 YaST 模块(&N)"
-#. radiobutton label
-#: src/include/add-on-creator/dialogs.rb:815
+#. radiobutton label
+#: src/include/add-on-creator/dialogs.rb:815
msgid "&Path to y2update.tgz"
msgstr "到 y2update.tgz 的路径(&P)"
-#. pushbutton label
-#: src/include/add-on-creator/dialogs.rb:823
+#. pushbutton label
+#: src/include/add-on-creator/dialogs.rb:823
msgid "&Browse"
msgstr "浏览(&B)"
-#. radiobutton label
-#: src/include/add-on-creator/dialogs.rb:830
+#. radiobutton label
+#: src/include/add-on-creator/dialogs.rb:830
msgid "&Import the Packages"
msgstr "导入包(&I)"
-#. table header
-#: src/include/add-on-creator/dialogs.rb:840
+#. table header
+#: src/include/add-on-creator/dialogs.rb:840
msgid "YaST Module Package"
msgstr "YaST 模块包"
-#. popup for file selection dialog
-#: src/include/add-on-creator/dialogs.rb:892
+#. popup for file selection dialog
+#: src/include/add-on-creator/dialogs.rb:892
msgid "Choose the installation.xml File"
msgstr "选择 installation.xml 文件"
-#. popup for file selection dialog
-#: src/include/add-on-creator/dialogs.rb:911
+#. popup for file selection dialog
+#: src/include/add-on-creator/dialogs.rb:911
msgid "Choose the Path to the y2update.tgz File"
msgstr "选择 y2update.tgz 文件的路径"
-#. popup for file selection dialog
-#: src/include/add-on-creator/dialogs.rb:922
+#. popup for file selection dialog
+#: src/include/add-on-creator/dialogs.rb:922
msgid "Choose the YaST Module Package"
msgstr "选择 YaST 模块包"
-#. Build dialog help
-#: src/include/add-on-creator/helps.rb:36
+#. Build dialog help
+#: src/include/add-on-creator/helps.rb:36
msgid ""
"<p><b><big>Creating the Add-On</big></b><br>\n"
"Please wait...<br></p>\n"
@@ -1046,8 +1039,8 @@
"<p><b><big>正在创建外接式附件</big></b><br>\n"
"请稍候...<br></p>\n"
-#. Write dialog help
-#: src/include/add-on-creator/helps.rb:40
+#. Write dialog help
+#: src/include/add-on-creator/helps.rb:40
msgid ""
"<p>Writing the add-on configurations<br>\n"
"</p>\n"
@@ -1055,342 +1048,227 @@
"<p>正在写入外接式附件配置<br>\n"
"</p>\n"
-#. help text for start menu
-#: src/include/add-on-creator/helps.rb:44
-msgid ""
-"<p>This module offers guidance for the creation of an add-on product.</p>"
+#. help text for start menu
+#: src/include/add-on-creator/helps.rb:44
+msgid "<p>This module offers guidance for the creation of an add-on product.</p>"
msgstr "<p>该模块提供创建外接式附件的指南。</p>"
-#. help text for start menu, cont.
-#: src/include/add-on-creator/helps.rb:48
-msgid ""
-"<p>Select how to create the new add-on product. You can create it from the "
-"beginning or base it on an existing product.</p>"
-msgstr ""
-"<p>选择如何创建新的外接式附件。您可以从头创建，也可以根据现有产品创建。</p>"
+#. help text for start menu, cont.
+#: src/include/add-on-creator/helps.rb:48
+msgid "<p>Select how to create the new add-on product. You can create it from the beginning or base it on an existing product.</p>"
+msgstr "<p>选择如何创建新的外接式附件。您可以从头创建，也可以根据现有产品创建。</p>"
-#. help text for start menu, cont.
-#: src/include/add-on-creator/helps.rb:52
-msgid ""
-"<p>When basing the new product on an existing product, check <b>Generate "
-"Package Descriptions</b> to generate new descriptions of packages in the "
-"existing product.</p>"
-msgstr ""
-"<p>根据现有产品创建新产品时，选中<b>生成包说明</b>生成现有产品中的包的新说"
-"明。</p>"
+#. help text for start menu, cont.
+#: src/include/add-on-creator/helps.rb:52
+msgid "<p>When basing the new product on an existing product, check <b>Generate Package Descriptions</b> to generate new descriptions of packages in the existing product.</p>"
+msgstr "<p>根据现有产品创建新产品时，选中<b>生成包说明</b>生成现有产品中的包的新说明。</p>"
-#. help text for initial data (paragraph title)
-#: src/include/add-on-creator/helps.rb:56
+#. help text for initial data (paragraph title)
+#: src/include/add-on-creator/helps.rb:56
msgid "<p><b>Name and Version</b></p>"
msgstr "<p><b>名称和版本</b></p>"
-#. help text for initial data, cont.
-#: src/include/add-on-creator/helps.rb:60
+#. help text for initial data, cont.
+#: src/include/add-on-creator/helps.rb:60
msgid "<p>Enter the name and version of add-on product.</p>"
msgstr "<p>输入外接式附件的名称和版本。</p>"
-#. help text for initial data, cont.
-#: src/include/add-on-creator/helps.rb:62
+#. help text for initial data, cont.
+#: src/include/add-on-creator/helps.rb:62
msgid "<p><b>Required Product</b></p>"
msgstr "<p><b>必需产品</b></p>"
-#. help text for initial data, cont.
-#: src/include/add-on-creator/helps.rb:64
-msgid ""
-"<p>Select the product to which the new add-on product can be applied. This "
-"selection forms the <b>REQUIRES</b> value of the <tt>content</tt> file.</p>"
-msgstr ""
-"<p>选择新外接式附件可应用到的产品。该选择构成了 <tt>content</tt> 文件的 "
-"<b>REQUIRES</b> 值。</p>"
+#. help text for initial data, cont.
+#: src/include/add-on-creator/helps.rb:64
+msgid "<p>Select the product to which the new add-on product can be applied. This selection forms the <b>REQUIRES</b> value of the <tt>content</tt> file.</p>"
+msgstr "<p>选择新外接式附件可应用到的产品。该选择构成了 <tt>content</tt> 文件的 <b>REQUIRES</b> 值。</p>"
-#. help text for initial data (paragraph title), cont.
-#: src/include/add-on-creator/helps.rb:68
+#. help text for initial data (paragraph title), cont.
+#: src/include/add-on-creator/helps.rb:68
msgid "<p><b>Add-On Packages</b></p>"
msgstr "<p><b>附加包</b></p>"
-#. help text for initial data, cont.
-#: src/include/add-on-creator/helps.rb:70
-msgid ""
-"<p>Choose the path to the directory containing the RPM packages that should "
-"form your add-on product.</p>"
+#. help text for initial data, cont.
+#: src/include/add-on-creator/helps.rb:70
+msgid "<p>Choose the path to the directory containing the RPM packages that should form your add-on product.</p>"
msgstr "<p>选择包含应构成外接式附件的 RPM 包的目录路径。</p>"
-#. help text for initial data (paragraph title), cont.
-#: src/include/add-on-creator/helps.rb:74
+#. help text for initial data (paragraph title), cont.
+#: src/include/add-on-creator/helps.rb:74
msgid "<p><b>Required Product Packages</b></p>"
msgstr "<p><b>必需产品包</b></p>"
-#. help text for initial data, cont.
-#: src/include/add-on-creator/helps.rb:76
-msgid ""
-"<p>Optionally, choose the path to the directory containing the RPM packages "
-"from the product the add-on product should be based on. These packages will "
-"not be contained in the add-on product, but could be used for creating the "
-"patterns later in the workflow.</p>"
-msgstr ""
-"<p>也可从外接式附件应基于的产品中选择包含 RPM 包的目录路径。这些包将不包含在"
-"外接式附件中，但稍后可以用于在工作流程中创建模式。</p>"
+#. help text for initial data, cont.
+#: src/include/add-on-creator/helps.rb:76
+msgid "<p>Optionally, choose the path to the directory containing the RPM packages from the product the add-on product should be based on. These packages will not be contained in the add-on product, but could be used for creating the patterns later in the workflow.</p>"
+msgstr "<p>也可从外接式附件应基于的产品中选择包含 RPM 包的目录路径。这些包将不包含在外接式附件中，但稍后可以用于在工作流程中创建模式。</p>"
-#. help text for content file editor (<tt>content</tt> is a name of file)
-#: src/include/add-on-creator/helps.rb:80
+#. help text for content file editor (<tt>content</tt> is a name of file)
+#: src/include/add-on-creator/helps.rb:80
msgid "<p>Here, edit the values of the <tt>content</tt> file.</p>"
msgstr "<p>在这里编辑 <tt>content</tt> 文件的值。</p>"
-#. help text for content file editor, cont.
-#: src/include/add-on-creator/helps.rb:84
-msgid ""
-"<p>Enter the information required to identify the add-on product. Deselect "
-"<b>Show Only Required Keywords</b> to see all attributes of the <tt>content file.</p>"
-msgstr ""
-"<p>输入标识外接式附件必需的信息。取消选择<b>只显示必需口令</b>，以便查看 "
-"<tt>content</tt> 文件的所有属性。</p>"
+#. help text for content file editor, cont.
+#: src/include/add-on-creator/helps.rb:84
+msgid "<p>Enter the information required to identify the add-on product. Deselect <b>Show Only Required Keywords</b> to see all attributes of the <tt>content</tt> file.</p>"
+msgstr "<p>输入标识外接式附件必需的信息。取消选择<b>只显示必需口令</b>，以便查看 <tt>content</tt> 文件的所有属性。</p>"
-#. help text for content file editor, cont.
-#: src/include/add-on-creator/helps.rb:88
+#. help text for content file editor, cont.
+#: src/include/add-on-creator/helps.rb:88
msgid "<p>Use <b>Import</b> to import an existing <tt>content</tt> file.</p>"
msgstr "<p>用<b>导入</b>导入现有 <tt>content</tt> 文件。</p>"
-#. help text for package description files
-#: src/include/add-on-creator/helps.rb:92
-msgid ""
-"<p>Edit the language-specific descriptions of packages (<tt>packages.lang files) here.</p>"
+#. help text for package description files
+#: src/include/add-on-creator/helps.rb:92
+msgid "<p>Edit the language-specific descriptions of packages (<tt>packages.lang</tt> files) here.</p>"
msgstr "<p>在此编辑包特定于语言的说明（<tt>packages.lang</tt> 文件）。</p>"
-#. help text for package description files, cont.
-#: src/include/add-on-creator/helps.rb:96
-msgid ""
-"<p>Use <b>Add Language</b> to add a description file for a new language. The "
-"list of available languages is read from the <b>LINGUAS</b> value of the "
-"<tt>content</tt> file. Import an existing file with package descriptions "
-"with <b>Import</b>. Delete the description file with <b>Delete</b>.</p>"
-msgstr ""
-"<p>用<b>添加语言</b>添加新语言的说明文件。可用语言的列表从 <tt>content</tt> "
-"文件的 <b>LINGUAS</b> 值读取。使用<b>导入</b>以将包说明导入现有文件。按<b>删"
-"除</b>以删除说明文件。</p>"
+#. help text for package description files, cont.
+#: src/include/add-on-creator/helps.rb:96
+msgid "<p>Use <b>Add Language</b> to add a description file for a new language. The list of available languages is read from the <b>LINGUAS</b> value of the <tt>content</tt> file. Import an existing file with package descriptions with <b>Import</b>. Delete the description file with <b>Delete</b>.</p>"
+msgstr "<p>用<b>添加语言</b>添加新语言的说明文件。可用语言的列表从 <tt>content</tt> 文件的 <b>LINGUAS</b> 值读取。使用<b>导入</b>以将包说明导入现有文件。按<b>删除</b>以删除说明文件。</p>"
-#. help text for package description files, cont.
-#: src/include/add-on-creator/helps.rb:100
-msgid ""
-"<p>Use <b>Add</b> and <b>Edit</b> in the second table to modify description "
-"entries for the selected package.</p>"
+#. help text for package description files, cont.
+#: src/include/add-on-creator/helps.rb:100
+msgid "<p>Use <b>Add</b> and <b>Edit</b> in the second table to modify description entries for the selected package.</p>"
msgstr "<p>用第二张表中的<b>添加</b>和<b>编辑</b>修改选定包的说明条目。</p>"
-#. help text for package description files, cont.
-#: src/include/add-on-creator/helps.rb:104
-msgid ""
-"<p>Optionally, choose the path for the file providing <b>Additional Package "
-"Dependencies</b> (EXTRA_PROV).</p>"
+#. help text for package description files, cont.
+#: src/include/add-on-creator/helps.rb:104
+msgid "<p>Optionally, choose the path for the file providing <b>Additional Package Dependencies</b> (EXTRA_PROV).</p>"
msgstr "<p>可以选择提供<b>附加包依赖性</b>的文件的路径 (EXTRA_PROV)。</p>"
-#. help text for patterns
-#: src/include/add-on-creator/helps.rb:108
+#. help text for patterns
+#: src/include/add-on-creator/helps.rb:108
msgid "<p>Create and edit the patterns for the add-on product here.</p>"
msgstr "<p>在此创建并编辑外接式附件的模式。</p>"
-#. help text for patterns, cont.
-#: src/include/add-on-creator/helps.rb:112
-msgid ""
-"<p>Use <b>New</b> to create a new pattern or <b>Import</b> to import an "
-"existing one.</p>"
+#. help text for patterns, cont.
+#: src/include/add-on-creator/helps.rb:112
+msgid "<p>Use <b>New</b> to create a new pattern or <b>Import</b> to import an existing one.</p>"
msgstr "<p>用<b>新建</b>创建新模式，或<b>导入</b>导入现有模式。</p>"
-#. help text for patterns, cont.
-#: src/include/add-on-creator/helps.rb:116
-msgid ""
-"<p>Use <b>Add</b> and <b>Edit</b> in the second table to modify pattern "
-"attributes.</p>"
+#. help text for patterns, cont.
+#: src/include/add-on-creator/helps.rb:116
+msgid "<p>Use <b>Add</b> and <b>Edit</b> in the second table to modify pattern attributes.</p>"
msgstr "<p>用第二张表中的<b>添加</b>和<b>编辑</b>修改模式属性。</p>"
-#. help text for patterns, cont.
-#: src/include/add-on-creator/helps.rb:120
+#. help text for patterns, cont.
+#: src/include/add-on-creator/helps.rb:120
msgid ""
-"<p>Check <b>Required pattern</b> to mark the selected pattern as required "
-"for\n"
-"the add-on product. Such a pattern will be automatically preselected when "
-"the installation of the add-on product is started.</p>"
+"<p>Check <b>Required pattern</b> to mark the selected pattern as required for\n"
+"the add-on product. Such a pattern will be automatically preselected when the installation of the add-on product is started.</p>"
msgstr ""
"<p>选中<b>必需模式</b>以将所选模式标记为外接式附件必需。\n"
"这些模式将会在安装外接式附件时自动预选中。</p>"
-#. help text for the 'various settings' dialog
-#: src/include/add-on-creator/helps.rb:124
-msgid ""
-"<p>Specify the path to the directory in which the add-on product should be "
-"created. Select <b>Create ISO Image</b> to create the ISO image of the "
-"product in the output directory.</p>"
-msgstr ""
-"<p>指定创建外接式附件的目录路径。选择<b>创建 ISO 映像</b>在输出目录中创建产品"
-"的 ISO 映像。</p>"
+#. help text for the 'various settings' dialog
+#: src/include/add-on-creator/helps.rb:124
+msgid "<p>Specify the path to the directory in which the add-on product should be created. Select <b>Create ISO Image</b> to create the ISO image of the product in the output directory.</p>"
+msgstr "<p>指定创建外接式附件的目录路径。选择<b>创建 ISO 映像</b>在输出目录中创建产品的 ISO 映像。</p>"
-#. help text for the 'various settings' dialog
-#: src/include/add-on-creator/helps.rb:128
-msgid ""
-"<p>Use <b>Generate Changelog</b> to generate a changelog file containing all "
-"changes of packages on the add-on product made in the last two years.</p>"
-msgstr ""
-"<p>使用<b>生成更改日志</b>以生成更改日志文件，记录最近两年内的外接式附件的所"
-"有包更改。</p>"
+#. help text for the 'various settings' dialog
+#: src/include/add-on-creator/helps.rb:128
+msgid "<p>Use <b>Generate Changelog</b> to generate a changelog file containing all changes of packages on the add-on product made in the last two years.</p>"
+msgstr "<p>使用<b>生成更改日志</b>以生成更改日志文件，记录最近两年内的外接式附件的所有包更改。</p>"
-#. help text for the 'various settings' dialog
-#: src/include/add-on-creator/helps.rb:132
-msgid ""
-"<p>Adapt the workflow of the add-on product with <b>Configure Workflow</b>. "
-"Use <b>Optional Files</b> to configure texts of <tt>README</tt> files, "
-"licenses, and other optional values.</p>"
-msgstr ""
-"<p>用<b>配置工作流程</b>适配外接式附件的工作流程。用<b>可选文件</b>配置 "
-"<tt>README</tt> 文件、许可和其他可选值的文本。</p>"
+#. help text for the 'various settings' dialog
+#: src/include/add-on-creator/helps.rb:132
+msgid "<p>Adapt the workflow of the add-on product with <b>Configure Workflow</b>. Use <b>Optional Files</b> to configure texts of <tt>README</tt> files, licenses, and other optional values.</p>"
+msgstr "<p>用<b>配置工作流程</b>适配外接式附件的工作流程。用<b>可选文件</b>配置 <tt>README</tt> 文件、许可和其他可选值的文本。</p>"
-#. workflow help text
-#: src/include/add-on-creator/helps.rb:136
-msgid ""
-"<p>Here, you can enter the files necessary for customizing your add-on "
-"product workflow.</p>"
+#. workflow help text
+#: src/include/add-on-creator/helps.rb:136
+msgid "<p>Here, you can enter the files necessary for customizing your add-on product workflow.</p>"
msgstr "<p>您可以在这里输入自定义您的外接式附件工作流程所必需的文件。</p>"
-#. workflow help text
-#: src/include/add-on-creator/helps.rb:140
-msgid ""
-"<p>Enter the location of the file with the workflow description. This file "
-"is an alternative to <tt>control.xml</tt> and is saved as <tt>installation."
-"xml</tt> in the add-on product's base directory.</p>"
-msgstr ""
-"<p>输入工作流程说明文件的位置。该文件可代替 <tt>control.xml</tt>，在外接式附"
-"件的基本目录中保存为 <tt>installation.xml</tt>。</p>"
+#. workflow help text
+#: src/include/add-on-creator/helps.rb:140
+msgid "<p>Enter the location of the file with the workflow description. This file is an alternative to <tt>control.xml</tt> and is saved as <tt>installation.xml</tt> in the add-on product's base directory.</p>"
+msgstr "<p>输入工作流程说明文件的位置。该文件可代替 <tt>control.xml</tt>，在外接式附件的基本目录中保存为 <tt>installation.xml</tt>。</p>"
-#. workflow help text
-#: src/include/add-on-creator/helps.rb:144
-msgid ""
-"<p>To use custom YaST modules during the installation of the add-on product, "
-"enter the path to the <tt>y2update.tgz</tt> archive where these modules are "
-"stored or configure the contents of <tt>y2update.tgz</tt> by specifying the "
-"YaST RPM packages in <b>Import the Packages</b>.</p>"
-msgstr ""
-"<p>要在外接式附件的安装过程中使用自定义 YaST 模块，请输入到存储这些模块的 "
-"<tt>y2update.tgz</tt> 存档的路径或通过在<b>导入包</b>中指定 YaST RPM 包来配"
-"置 <tt>y2update.tgz</tt> 的内容。</p>"
+#. workflow help text
+#: src/include/add-on-creator/helps.rb:144
+msgid "<p>To use custom YaST modules during the installation of the add-on product, enter the path to the <tt>y2update.tgz</tt> archive where these modules are stored or configure the contents of <tt>y2update.tgz</tt> by specifying the YaST RPM packages in <b>Import the Packages</b>.</p>"
+msgstr "<p>要在外接式附件的安装过程中使用自定义 YaST 模块，请输入到存储这些模块的 <tt>y2update.tgz</tt> 存档的路径或通过在<b>导入包</b>中指定 YaST RPM 包来配置 <tt>y2update.tgz</tt> 的内容。</p>"
-#. help text for expert dialog 1
-#: src/include/add-on-creator/helps.rb:148
-msgid ""
-"<p>The optional <tt>info.txt</tt> file gives information about the add-on "
-"that should be displayed as a pop-up window with an <b>OK</b> button.</p>"
-msgstr ""
-"<p>可选的 <tt>info.txt</tt> 文件给出了有关应显示为带有<b>确定</b>按钮的弹出窗"
-"口的附加相关信息。</p>"
+#. help text for expert dialog 1
+#: src/include/add-on-creator/helps.rb:148
+msgid "<p>The optional <tt>info.txt</tt> file gives information about the add-on that should be displayed as a pop-up window with an <b>OK</b> button.</p>"
+msgstr "<p>可选的 <tt>info.txt</tt> 文件给出了有关应显示为带有<b>确定</b>按钮的弹出窗口的附加相关信息。</p>"
-#. help text for expert dialog 1, cont
-#: src/include/add-on-creator/helps.rb:152
-msgid ""
-"<p>The text of the license is displayed in a window with <b>Agree</b> and "
-"<b>Disagree</b> buttons before the installation starts. The files with the "
-"license texts in different languages are compressed to the <tt>license.zip archive and stored in the <tt>media.1</tt> directory.</p>"
-msgstr ""
-"<p>安装开始前会在带有<b>同意</b>和<b>不同意</b>按钮的窗口中显示许可文本。不同"
-"语言的许可文本文件压缩成了 <tt>license.zip</tt> 存档并保存在 <tt>media.1 目录中。</p>"
+#. help text for expert dialog 1, cont
+#: src/include/add-on-creator/helps.rb:152
+msgid "<p>The text of the license is displayed in a window with <b>Agree</b> and <b>Disagree</b> buttons before the installation starts. The files with the license texts in different languages are compressed to the <tt>license.zip</tt> archive and stored in the <tt>media.1</tt> directory.</p>"
+msgstr "<p>安装开始前会在带有<b>同意</b>和<b>不同意</b>按钮的窗口中显示许可文本。不同语言的许可文本文件压缩成了 <tt>license.zip</tt> 存档并保存在 <tt>media.1</tt> 目录中。</p>"
-#. help text for expert dialog 2
-#: src/include/add-on-creator/helps.rb:156
-msgid ""
-"<p>The <tt>COPYRIGHT</tt> and <tt>COPYING</tt> files can have various "
-"language modifications and are stored in the root directory of the add-on "
-"product.</p>"
-msgstr ""
-"<p><tt>版权</tt>和<tt>复制中</tt>文件可有不同语言的修订版，保存在外接式附件的"
-"根目录中。</p>"
+#. help text for expert dialog 2
+#: src/include/add-on-creator/helps.rb:156
+msgid "<p>The <tt>COPYRIGHT</tt> and <tt>COPYING</tt> files can have various language modifications and are stored in the root directory of the add-on product.</p>"
+msgstr "<p><tt>版权</tt>和<tt>复制中</tt>文件可有不同语言的修订版，保存在外接式附件的根目录中。</p>"
-#. help text for signing dialog
-#: src/include/add-on-creator/helps.rb:160
-msgid ""
-"<p>Here, configure the signing of the add-on product. Choose a secret key "
-"from the list of keys available or create a new one with <b>Create</b>.</p>"
-msgstr ""
-"<p>在此处配置外接式附件的注册。从可用密钥列表选择密钥，或用<b>创建</b>创建新"
-"密钥。</p>"
+#. help text for signing dialog
+#: src/include/add-on-creator/helps.rb:160
+msgid "<p>Here, configure the signing of the add-on product. Choose a secret key from the list of keys available or create a new one with <b>Create</b>.</p>"
+msgstr "<p>在此处配置外接式附件的注册。从可用密钥列表选择密钥，或用<b>创建</b>创建新密钥。</p>"
-#. help text for signing dialog, cont.
-#: src/include/add-on-creator/helps.rb:164
+#. help text for signing dialog, cont.
+#: src/include/add-on-creator/helps.rb:164
msgid "<p>Enter the passphrase needed to unlock the secret key.</p>"
msgstr "<p>输入解锁密钥所需的通行口令。</p>"
-#. help text for signing dialog, cont.
-#: src/include/add-on-creator/helps.rb:166
-msgid ""
-"<p>Decide if you want to <b>Sign All Packages</b> of the add-on product with "
-"the selected key. All previous package signatures will be removed.</p>"
-msgstr ""
-"<p>确定是否要用选定的密钥<b>对所有包签名</b>（外接式附件）。将去除所有之前的"
-"包签名。</p>"
+#. help text for signing dialog, cont.
+#: src/include/add-on-creator/helps.rb:166
+msgid "<p>Decide if you want to <b>Sign All Packages</b> of the add-on product with the selected key. All previous package signatures will be removed.</p>"
+msgstr "<p>确定是否要用选定的密钥<b>对所有包签名</b>（外接式附件）。将去除所有之前的包签名。</p>"
-#. help text for generating new key dialog
-#: src/include/add-on-creator/helps.rb:170
-msgid ""
-"<p>Enter the values necessary for generating the new primary key pair.</p>"
+#. help text for generating new key dialog
+#: src/include/add-on-creator/helps.rb:170
+msgid "<p>Enter the values necessary for generating the new primary key pair.</p>"
msgstr "<p>输入生成新的主密钥对所需的值。</p>"
-#. help text for generating new key dialog, cont.
-#: src/include/add-on-creator/helps.rb:174
-msgid ""
-"<p>The default size of a DSA key is 1024 bits. RSA keys may be between 1024 "
-"and 4096 bits long.</p>"
-msgstr ""
-"<p>DSA 密钥的默认大小是 1024 位。RSA 密钥长度可介于 1024 和 4096 位之间。</p>"
+#. help text for generating new key dialog, cont.
+#: src/include/add-on-creator/helps.rb:174
+msgid "<p>The default size of a DSA key is 1024 bits. RSA keys may be between 1024 and 4096 bits long.</p>"
+msgstr "<p>DSA 密钥的默认大小是 1024 位。RSA 密钥长度可介于 1024 和 4096 位之间。</p>"
-#. help text for generating new key dialog, cont.
-#: src/include/add-on-creator/helps.rb:178
-msgid ""
-"<p>As <b>Expiration Date</b>, enter the number of days after which the key "
-"expires. If the number is followed by <tt>w</tt>,<tt>m</tt>, or <tt>y</tt>, "
-"it indicates the number of weeks, months, or years. Leave the entry empty "
-"for a key that never expires.</p>"
-msgstr ""
-"<p>至于<b>到期日</b>，请输入密钥到期前的天数。如果数字后面跟着 <tt>w</tt>、"
-"<tt>m</tt> 或 <tt>y</tt>，则表示周数、月数或年数。对永不过期的密钥，保留该条"
-"目为空白即可。</p>"
+#. help text for generating new key dialog, cont.
+#: src/include/add-on-creator/helps.rb:178
+msgid "<p>As <b>Expiration Date</b>, enter the number of days after which the key expires. If the number is followed by <tt>w</tt>,<tt>m</tt>, or <tt>y</tt>, it indicates the number of weeks, months, or years. Leave the entry empty for a key that never expires.</p>"
+msgstr "<p>至于<b>到期日</b>，请输入密钥到期前的天数。如果数字后面跟着 <tt>w</tt>、<tt>m</tt> 或 <tt>y</tt>，则表示周数、月数或年数。对永不过期的密钥，保留该条目为空白即可。</p>"
-#. help text for generating new key dialog, cont.
-#: src/include/add-on-creator/helps.rb:182
-msgid ""
-"<p>Use <b>Name</b>, <b>Comment</b>, and <b>E-Mail Address</b> to provide the "
-"user identification with which the new key should be associated.</p>"
-msgstr ""
-"<p>用<b>姓名</b>、<b>注释</b>和<b>电子邮件地址</b>提供新密钥应关联的用户标"
-"识。</p>"
+#. help text for generating new key dialog, cont.
+#: src/include/add-on-creator/helps.rb:182
+msgid "<p>Use <b>Name</b>, <b>Comment</b>, and <b>E-Mail Address</b> to provide the user identification with which the new key should be associated.</p>"
+msgstr "<p>用<b>姓名</b>、<b>注释</b>和<b>电子邮件地址</b>提供新密钥应关联的用户标识。</p>"
-#. help text for overview dialog
-#: src/include/add-on-creator/helps.rb:186
-msgid ""
-"<p>Here, see the overview of data for generating the add-on product.</p>"
+#. help text for overview dialog
+#: src/include/add-on-creator/helps.rb:186
+msgid "<p>Here, see the overview of data for generating the add-on product.</p>"
msgstr "<p>在此处可查看生成外接式附件的数据的概览。</p>"
-#. help text for overview dialog, cont.
-#: src/include/add-on-creator/helps.rb:190
-msgid ""
-"<p>Press <b>Finish</b> to create the add-on product in the output directory."
-"</p>"
+#. help text for overview dialog, cont.
+#: src/include/add-on-creator/helps.rb:190
+msgid "<p>Press <b>Finish</b> to create the add-on product in the output directory.</p>"
msgstr "<p>按<b>完成</b>在输出目录中创建外接式附件。</p>"
-#. text entry label
-#: src/include/add-on-creator/patterns.rb:113
+#. text entry label
+#: src/include/add-on-creator/patterns.rb:113
msgid "&Name of the New Pattern"
msgstr "新模式的名称(&N)"
-#. combo box label
-#: src/include/add-on-creator/patterns.rb:118
+#. combo box label
+#: src/include/add-on-creator/patterns.rb:118
msgid "&Architecture"
msgstr "体系结构(&A)"
-#. text entry label
-#: src/include/add-on-creator/patterns.rb:128
+#. text entry label
+#: src/include/add-on-creator/patterns.rb:128
msgid "&Release"
msgstr "版本(&R)"
-#. popup message
-#: src/include/add-on-creator/patterns.rb:150
+#. popup message
+#: src/include/add-on-creator/patterns.rb:150
msgid ""
"Such a pattern already exists.\n"
"Choose a different name or architecture.\n"
@@ -1398,25 +1276,25 @@
"此类模式已存在。\n"
"请选择其他名称或体系结构。\n"
-#: src/include/add-on-creator/patterns.rb:198
+#: src/include/add-on-creator/patterns.rb:198
msgid "&Description"
msgstr "描述(&D)"
-#: src/include/add-on-creator/patterns.rb:202
+#: src/include/add-on-creator/patterns.rb:202
msgid "&Summary"
msgstr "摘要(&S)"
-#: src/include/add-on-creator/patterns.rb:203
+#: src/include/add-on-creator/patterns.rb:203
msgid "Ca&tegory"
msgstr "类别(&T)"
-#. combo label
-#: src/include/add-on-creator/patterns.rb:213
+#. combo label
+#: src/include/add-on-creator/patterns.rb:213
msgid "&Language Code"
msgstr "语言代码(&L)"
-#. popup message
-#: src/include/add-on-creator/patterns.rb:257
+#. popup message
+#: src/include/add-on-creator/patterns.rb:257
msgid ""
"A key with this name already exists.\n"
"Choose a different one."
@@ -1424,33 +1302,33 @@
"同名密钥已存在。\n"
"请选择其他名称。"
-#. dialog caption
-#: src/include/add-on-creator/patterns.rb:319
+#. dialog caption
+#: src/include/add-on-creator/patterns.rb:319
msgid "Editor for Patterns"
msgstr "模式的编辑器"
-#. table header
-#: src/include/add-on-creator/patterns.rb:332
+#. table header
+#: src/include/add-on-creator/patterns.rb:332
msgid "Name of the Pattern"
msgstr "模式的名称"
-#. table header
-#: src/include/add-on-creator/patterns.rb:334
+#. table header
+#: src/include/add-on-creator/patterns.rb:334
msgid "Full Name"
msgstr "全名"
-#. check box label
-#: src/include/add-on-creator/patterns.rb:369
+#. check box label
+#: src/include/add-on-creator/patterns.rb:369
msgid "R&equired Pattern"
msgstr "必需模式(&E)"
-#. popup for file selection dialog
-#: src/include/add-on-creator/patterns.rb:445
+#. popup for file selection dialog
+#: src/include/add-on-creator/patterns.rb:445
msgid "Existing Pattern"
msgstr "现有模式"
-#. error message
-#: src/include/add-on-creator/patterns.rb:601
+#. error message
+#: src/include/add-on-creator/patterns.rb:601
msgid ""
"Such a pattern already exists.\n"
"Choose a different architecture.\n"
@@ -1458,355 +1336,315 @@
"此类模式已存在。\n"
"请选择其他体系结构。\n"
-#. busy message
-#: src/include/add-on-creator/wizards.rb:53
+#. busy message
+#: src/include/add-on-creator/wizards.rb:53
msgid "Importing product..."
msgstr "正在导入产品..."
-#. label of content file key
-#: src/modules/AddOnCreator.rb:139
+#. label of content file key
+#: src/modules/AddOnCreator.rb:139
msgid "Content file style"
msgstr "内容文件样式"
-#. help text for content file CONTENTSTYLE key
-#: src/modules/AddOnCreator.rb:141
+#. help text for content file CONTENTSTYLE key
+#: src/modules/AddOnCreator.rb:141
msgid "Must be the first tag of the content file."
msgstr "必须是内容文件的首个标记。"
-#. label of content file key
-#: src/modules/AddOnCreator.rb:150
+#. label of content file key
+#: src/modules/AddOnCreator.rb:150
msgid "Product name"
msgstr "产品名称"
-#. help text for content file 'NAME' key
-#: src/modules/AddOnCreator.rb:152
+#. help text for content file 'NAME' key
+#: src/modules/AddOnCreator.rb:152
msgid "For internal usage. Same restrictions as for package names apply."
msgstr "供内部使用。应用与包名称相同的限制。"
-#. label of content file BASEARCHS key
-#: src/modules/AddOnCreator.rb:160
+#. label of content file BASEARCHS key
+#: src/modules/AddOnCreator.rb:160
msgid "Product architectures"
msgstr "产品体系结构"
-#. help text for content file 'BASEARCHS' key
-#: src/modules/AddOnCreator.rb:164
-msgid ""
-"Space-separated list of product architectures. Matches the available product-"
-"release packages architectures. "
+#. help text for content file 'BASEARCHS' key
+#: src/modules/AddOnCreator.rb:164
+msgid "Space-separated list of product architectures. Matches the available product-release packages architectures. "
msgstr "产品体系结构的空格分隔列表。匹配于可用的产品版本包体系结构。 "
-#. label of content file 'VERSION' key
-#: src/modules/AddOnCreator.rb:172
+#. label of content file 'VERSION' key
+#: src/modules/AddOnCreator.rb:172
msgid "Product version and release"
msgstr "产品版本和发行版"
-#. help text for content file 'VERSION' key
-#: src/modules/AddOnCreator.rb:176
+#. help text for content file 'VERSION' key
+#: src/modules/AddOnCreator.rb:176
msgid "Product version and release as in RPM <tt>major.minor-release</tt>."
msgstr "产品版本和发行版（按 RPM <tt>major.minor-release</tt> 中所定义）。"
-#. table item label
-#. table item label
-#: src/modules/AddOnCreator.rb:185 src/modules/AddOnCreator.rb:720
+#. table item label
+#. table item label
+#: src/modules/AddOnCreator.rb:185 src/modules/AddOnCreator.rb:720
msgid "Release number"
msgstr "版本号"
-#. label of content file key
-#: src/modules/AddOnCreator.rb:192
+#. label of content file key
+#: src/modules/AddOnCreator.rb:192
msgid "Distribution name"
msgstr "分发名称"
-#. help text for content file 'DISTRIBUTION' key
-#: src/modules/AddOnCreator.rb:194
-msgid ""
-"Some string denoting the distribution. The same string is most probably used "
-"in the .rpms to denote the distribution. Usually a composition of the name, "
-"version and architecture."
-msgstr ""
-"一个表示分发包的字符串。同一字符串很可能在 .rpms 中使用以表示分发包。通常是名"
-"称、版本和体系结构的组合。"
+#. help text for content file 'DISTRIBUTION' key
+#: src/modules/AddOnCreator.rb:194
+msgid "Some string denoting the distribution. The same string is most probably used in the .rpms to denote the distribution. Usually a composition of the name, version and architecture."
+msgstr "一个表示分发包的字符串。同一字符串很可能在 .rpms 中使用以表示分发包。通常是名称、版本和体系结构的组合。"
-#. label of content file key
-#: src/modules/AddOnCreator.rb:201
+#. label of content file key
+#: src/modules/AddOnCreator.rb:201
msgid "Package description directory"
msgstr "包说明目录"
-#. help text for content file 'DESCRDIR' key
-#: src/modules/AddOnCreator.rb:206
+#. help text for content file 'DESCRDIR' key
+#: src/modules/AddOnCreator.rb:206
msgid "Package description directory (relative to product directory)."
msgstr "包说明目录（相对于产品目录）。"
-#. label of content file key
-#: src/modules/AddOnCreator.rb:214
+#. label of content file key
+#: src/modules/AddOnCreator.rb:214
msgid "Package data directory"
msgstr "包数据目录"
-#. help text for content file 'DATADIR' key
-#: src/modules/AddOnCreator.rb:216
+#. help text for content file 'DATADIR' key
+#: src/modules/AddOnCreator.rb:216
msgid "Package data directory (relative to product directory)."
msgstr "包数据目录（相对于产品目录）。"
-#. label of content file key
-#: src/modules/AddOnCreator.rb:225
+#. label of content file key
+#: src/modules/AddOnCreator.rb:225
msgid "Label"
msgstr "标签"
-#. help text for content file '' key
-#: src/modules/AddOnCreator.rb:227
-msgid ""
-"UTF-8 encoded label. Default label if <b>LINGUAS</b> is omitted or no "
-"default language can be determined."
-msgstr ""
-"UTF-8 编码标签。如果 <b>LINGUAS</b> 省略或无默认语言可确定，将是默认标签。"
+#. help text for content file '' key
+#: src/modules/AddOnCreator.rb:227
+msgid "UTF-8 encoded label. Default label if <b>LINGUAS</b> is omitted or no default language can be determined."
+msgstr "UTF-8 编码标签。如果 <b>LINGUAS</b> 省略或无默认语言可确定，将是默认标签。"
-#. label of content file 'LINGUAS' key
-#: src/modules/AddOnCreator.rb:234
+#. label of content file 'LINGUAS' key
+#: src/modules/AddOnCreator.rb:234
msgid "Languages"
msgstr "语言"
-#. help text for content file 'LINGUAS' key
-#: src/modules/AddOnCreator.rb:236
+#. help text for content file 'LINGUAS' key
+#: src/modules/AddOnCreator.rb:236
msgid "ISO language code or language code_country code."
msgstr "ISO 语言代码或语言代码_国家/地区代码。"
-#. label of content file 'LANGUAGE' key
-#: src/modules/AddOnCreator.rb:243
+#. label of content file 'LANGUAGE' key
+#: src/modules/AddOnCreator.rb:243
msgid "Default language"
msgstr "默认语言"
-#. help text for content file 'LANGUAGE' key
-#: src/modules/AddOnCreator.rb:247
+#. help text for content file 'LANGUAGE' key
+#: src/modules/AddOnCreator.rb:247
msgid "Default language code."
msgstr "默认语言代码。"
-#. label of content file 'PATTERNS' key
-#: src/modules/AddOnCreator.rb:256
+#. label of content file 'PATTERNS' key
+#: src/modules/AddOnCreator.rb:256
msgid "Preselected patterns"
msgstr "预选模式"
-#. help text for content file 'PATTERNS' key
-#: src/modules/AddOnCreator.rb:260
+#. help text for content file 'PATTERNS' key
+#: src/modules/AddOnCreator.rb:260
msgid "List of patterns preselected by the product."
msgstr "模式列表已由产品预选。"
-#. label of content file key
-#: src/modules/AddOnCreator.rb:267
+#. label of content file key
+#: src/modules/AddOnCreator.rb:267
msgid "Vendor name"
msgstr "供应商名称"
-#. help text for content file 'VENDOR' key
-#: src/modules/AddOnCreator.rb:269
+#. help text for content file 'VENDOR' key
+#: src/modules/AddOnCreator.rb:269
msgid "Vendor name (free form)."
msgstr "供应商名称（自由形式）。"
-#. label of content file 'RELNOTESURL' key
-#: src/modules/AddOnCreator.rb:277
+#. label of content file 'RELNOTESURL' key
+#: src/modules/AddOnCreator.rb:277
msgid "Release notes URL"
msgstr "发行说明 URL"
-#. help text for content file 'RELNOTESURL' key
-#: src/modules/AddOnCreator.rb:281
+#. help text for content file 'RELNOTESURL' key
+#: src/modules/AddOnCreator.rb:281
msgid "URL from which to fetch release notes."
msgstr "可查看发行说明的 URL。"
-#. label of content file 'UPDATEURLS' key
-#: src/modules/AddOnCreator.rb:288
+#. label of content file 'UPDATEURLS' key
+#: src/modules/AddOnCreator.rb:288
msgid "Update URL"
msgstr "更新 URL"
-#. help text for content file 'UPDATEURLS' key
-#: src/modules/AddOnCreator.rb:290
+#. help text for content file 'UPDATEURLS' key
+#: src/modules/AddOnCreator.rb:290
msgid "URL of the update source."
msgstr "更新源的 URL。"
-#. label of content file LABEL.lang key
-#: src/modules/AddOnCreator.rb:300
+#. label of content file LABEL.lang key
+#: src/modules/AddOnCreator.rb:300
msgid "Language-specific label"
msgstr "特定于语言的标签"
-#. help text for content file 'LABEL.lang' key
-#: src/modules/AddOnCreator.rb:304
-msgid ""
-"UTF-8-encoded <b>LABEL</b>. <tt>lang</tt> has the same syntax as the "
-"<b>LINGUAS</b> values. For each language in <b>LINGUAS</b>, a matching "
-"<b>LABEL.lang</b> is expected."
-msgstr ""
-"UTF-8 编码的<b>标签</b>。<tt>lang</tt> 的语法和 <b>LINGUAS</b> 值一样。对 "
-"<b>LINGUAS</b> 中的每种语言，都期望有一个匹配的 <b>LABEL.lang</b>。"
+#. help text for content file 'LABEL.lang' key
+#: src/modules/AddOnCreator.rb:304
+msgid "UTF-8-encoded <b>LABEL</b>. <tt>lang</tt> has the same syntax as the <b>LINGUAS</b> values. For each language in <b>LINGUAS</b>, a matching <b>LABEL.lang</b> is expected."
+msgstr "UTF-8 编码的<b>标签</b>。<tt>lang</tt> 的语法和 <b>LINGUAS</b> 值一样。对 <b>LINGUAS</b> 中的每种语言，都期望有一个匹配的 <b>LABEL.lang</b>。"
-#: src/modules/AddOnCreator.rb:328
+#: src/modules/AddOnCreator.rb:328
msgid "Architecture"
msgstr "体系结构"
-#. label for 'Sum' key
-#: src/modules/AddOnCreator.rb:338 src/modules/AddOnCreator.rb:589
+#. label for 'Sum' key
+#: src/modules/AddOnCreator.rb:338 src/modules/AddOnCreator.rb:589
msgid "Summary"
msgstr "小结"
-#. help text for 'Sum' pattern key
-#: src/modules/AddOnCreator.rb:340
+#. help text for 'Sum' pattern key
+#: src/modules/AddOnCreator.rb:340
msgid "One line label in the default language"
msgstr "默认语言的单行标签"
-#. help text for 'Sum.lang' pattern key
-#: src/modules/AddOnCreator.rb:344
+#. help text for 'Sum.lang' pattern key
+#: src/modules/AddOnCreator.rb:344
msgid "One line language-specific label."
msgstr "特定于语言的单行标签。"
-#. help text for 'Des' pattern key
-#: src/modules/AddOnCreator.rb:354
+#. help text for 'Des' pattern key
+#: src/modules/AddOnCreator.rb:354
msgid "Multiple line description in the default language"
msgstr "默认语言的多行说明"
-#. help text for 'Des.lang' pattern key
-#: src/modules/AddOnCreator.rb:358
+#. help text for 'Des.lang' pattern key
+#: src/modules/AddOnCreator.rb:358
msgid "Multiple line description, language-specific."
msgstr "特定于语言的多行说明。"
-#. label for 'Cat' pattern key
-#: src/modules/AddOnCreator.rb:364
+#. label for 'Cat' pattern key
+#: src/modules/AddOnCreator.rb:364
msgid "Category"
msgstr "类别"
-#. help text for 'Cat' pattern key
-#: src/modules/AddOnCreator.rb:366
-msgid ""
-"One line category in the default language used to group patterns. Categories "
-"are intended for the user and can be specified freely."
+#. help text for 'Cat' pattern key
+#: src/modules/AddOnCreator.rb:366
+msgid "One line category in the default language used to group patterns. Categories are intended for the user and can be specified freely."
msgstr "用于将模式分组的默认语言单行类别。类别是为用户设计的，可自由指定。"
-#. help text for 'Cat.lang' pattern key
-#: src/modules/AddOnCreator.rb:370
+#. help text for 'Cat.lang' pattern key
+#: src/modules/AddOnCreator.rb:370
msgid "Language-specific version of the category."
msgstr "特定于语言的类别版本。"
-#. label for 'Vis' pattern key
-#: src/modules/AddOnCreator.rb:377
+#. label for 'Vis' pattern key
+#: src/modules/AddOnCreator.rb:377
msgid "Visibility"
msgstr "可见性"
-#. help text for 'Vis' pattern key
-#: src/modules/AddOnCreator.rb:379
+#. help text for 'Vis' pattern key
+#: src/modules/AddOnCreator.rb:379
msgid "Set whether the pattern should be visible in the user interface."
msgstr "设置该模式在用户界面中是否可见。"
-#. label for 'Prq' pattern key
-#: src/modules/AddOnCreator.rb:388
+#. label for 'Prq' pattern key
+#: src/modules/AddOnCreator.rb:388
msgid "Packages"
msgstr "包"
-#. help text for 'Prq' pattern key
-#: src/modules/AddOnCreator.rb:390
+#. help text for 'Prq' pattern key
+#: src/modules/AddOnCreator.rb:390
msgid "List of packages to install."
msgstr "要安装的包列表。"
-#. label for 'Prc' pattern key
-#: src/modules/AddOnCreator.rb:398
+#. label for 'Prc' pattern key
+#: src/modules/AddOnCreator.rb:398
msgid "Recommended packages"
msgstr "推荐的包"
-#. help text for 'Prc' pattern key
-#: src/modules/AddOnCreator.rb:400
-msgid ""
-"These packages are installed by default but can be removed without complaint."
+#. help text for 'Prc' pattern key
+#: src/modules/AddOnCreator.rb:400
+msgid "These packages are installed by default but can be removed without complaint."
msgstr "这些包默认安装，但无需说明即可删除。"
-#. label for 'Prs' pattern key
-#: src/modules/AddOnCreator.rb:408
+#. label for 'Prs' pattern key
+#: src/modules/AddOnCreator.rb:408
msgid "Suggested packages"
msgstr "建议的包"
-#. help text for 'Prs' pattern key
-#. help text for 'Sug' pattern key
-#. help text for 'SUGGESTS' key
-#: src/modules/AddOnCreator.rb:410 src/modules/AddOnCreator.rb:503
-#: src/modules/AddOnCreator.rb:712
-msgid ""
-"These are just hints for an application and not handled during dependency "
-"resolution."
+#. help text for 'Prs' pattern key
+#. help text for 'Sug' pattern key
+#. help text for 'SUGGESTS' key
+#: src/modules/AddOnCreator.rb:410 src/modules/AddOnCreator.rb:503
+#: src/modules/AddOnCreator.rb:712
+msgid "These are just hints for an application and not handled during dependency resolution."
msgstr "这些只是应用提示，在依赖性解决方案中并非如此处理。"
-#. label for 'Ico' pattern key
-#: src/modules/AddOnCreator.rb:418
+#. label for 'Ico' pattern key
+#: src/modules/AddOnCreator.rb:418
msgid "Icon filename"
msgstr "图标文件名"
-#. help text for 'Ico' pattern key
-#: src/modules/AddOnCreator.rb:420
+#. help text for 'Ico' pattern key
+#: src/modules/AddOnCreator.rb:420
msgid ""
"If unspecified, the pattern name is used \n"
-" instead (with blanks in the name replaced by underscores). If the filename "
-"does not include a .png or .jpg extension, .png is appended. If no path is "
-"specified, icons are searched for in the theme icon path (first /usr/share/"
-"YaST2/theme/current/icons/32x32/apps/ then /usr/share/YaST2/theme/current/"
-"icons/48x48/apps/). Absolute and relative paths (to the theme path /usr/"
-"share/YaST2/theme/current/) are allowed."
+" instead (with blanks in the name replaced by underscores). If the filename does not include a .png or .jpg extension, .png is appended. If no path is specified, icons are searched for in the theme icon path (first /usr/share/YaST2/theme/current/icons/32x32/apps/ then /usr/share/YaST2/theme/current/icons/48x48/apps/). Absolute and relative paths (to the theme path /usr/share/YaST2/theme/current/) are allowed."
msgstr ""
"如果未指定，将转而使用模式名\n"
-"（名称中的空格用下划线代替）。如果文件名不包括 .png 或 .jpg 扩展名，将附加 ."
-"png。如果未指定路径，将在主题图标路径（起初是 /usr/share/YaST2/theme/current/"
-"icons/32x32/apps/，然后是 /usr/share/YaST2/theme/current/icons/48x48/apps/）"
-"中搜索图标。绝对路径和相对路径（相对于主题路径 /usr/share/YaST2/theme/"
-"current/）都允许。"
+"（名称中的空格用下划线代替）。如果文件名不包括 .png 或 .jpg 扩展名，将附加 .png。如果未指定路径，将在主题图标路径（起初是 /usr/share/YaST2/theme/current/icons/32x32/apps/，然后是 /usr/share/YaST2/theme/current/icons/48x48/apps/）中搜索图标。绝对路径和相对路径（相对于主题路径 /usr/share/YaST2/theme/current/）都允许。"
-#. label for 'Ord' pattern key
-#: src/modules/AddOnCreator.rb:429
+#. label for 'Ord' pattern key
+#: src/modules/AddOnCreator.rb:429
msgid "Pattern Order"
msgstr "模式顺序"
-#. help text for 'Ord' pattern key
-#: src/modules/AddOnCreator.rb:431
-msgid ""
-"This three-digit integer value defines the order of the pattern when listing "
-"multiple patterns in the user interface."
+#. help text for 'Ord' pattern key
+#: src/modules/AddOnCreator.rb:431
+msgid "This three-digit integer value defines the order of the pattern when listing multiple patterns in the user interface."
msgstr "该三位整数值定义了用户界面中列出多个模式时，模式显示的顺序。"
-#. label for 'Req' pattern key
-#: src/modules/AddOnCreator.rb:441
+#. label for 'Req' pattern key
+#: src/modules/AddOnCreator.rb:441
msgid "Required patterns"
msgstr "必需模式"
-#. help text for 'Req' pattern key
-#: src/modules/AddOnCreator.rb:443
+#. help text for 'Req' pattern key
+#: src/modules/AddOnCreator.rb:443
msgid "Patterns that need to be installed together with this pattern."
msgstr "必须和该模式一起安装的模式。"
-#. label for 'Prv' pattern key
-#: src/modules/AddOnCreator.rb:451
+#. label for 'Prv' pattern key
+#: src/modules/AddOnCreator.rb:451
msgid "Provided patterns"
msgstr "提供的模式"
-#. help text for 'Prv' pattern key
-#: src/modules/AddOnCreator.rb:453
-msgid ""
-"Capabilities this pattern provides. They can be used to match <b>REQUIRES from others. Every resolvable has a provide by default--its own name and "
-"edition. For example, package <i>bar-1.42-1</i> provides the capability "
-"<tt>bar = 1.42-1</tt>."
-msgstr ""
-"该模式提供的功能。它们可用于匹配其他的 <b>REQUIRES</b>。每个组件都有默认的提"
-"供者 － 其自身名称和版本。例如，包 <i>bar-1.42-1</i>提供功能 <tt>bar = "
-"1.42-1</tt>。"
+#. help text for 'Prv' pattern key
+#: src/modules/AddOnCreator.rb:453
+msgid "Capabilities this pattern provides. They can be used to match <b>REQUIRES</b> from others. Every resolvable has a provide by default--its own name and edition. For example, package <i>bar-1.42-1</i> provides the capability <tt>bar = 1.42-1</tt>."
+msgstr "该模式提供的功能。它们可用于匹配其他的 <b>REQUIRES</b>。每个组件都有默认的提供者 － 其自身名称和版本。例如，包 <i>bar-1.42-1</i>提供功能 <tt>bar = 1.42-1</tt>。"
-#. label for 'Con' pattern key
-#: src/modules/AddOnCreator.rb:461
+#. label for 'Con' pattern key
+#: src/modules/AddOnCreator.rb:461
msgid "Conflicting patterns"
msgstr "模式有冲突"
-#. help text for 'Con' pattern key
-#: src/modules/AddOnCreator.rb:463
-msgid ""
-"This pattern cannot be installed if the specified resolvable or one that "
-"provides the capability is installed."
+#. help text for 'Con' pattern key
+#: src/modules/AddOnCreator.rb:463
+msgid "This pattern cannot be installed if the specified resolvable or one that provides the capability is installed."
msgstr "如果指定组件和提供该功能的组件已安装，则无法安装该模式。"
-#. label for 'Obs' pattern key
-#: src/modules/AddOnCreator.rb:471
+#. label for 'Obs' pattern key
+#: src/modules/AddOnCreator.rb:471
msgid "Patterns made obsolete"
msgstr "已过时的模式"
-#. help text for 'Obs' pattern key
-#: src/modules/AddOnCreator.rb:473
+#. help text for 'Obs' pattern key
+#: src/modules/AddOnCreator.rb:473
msgid ""
"When this pattern is installed, it uninstalls any \n"
"other patterns marked as obsolete here."
@@ -1814,308 +1652,274 @@
"安装该模式时，将卸载此处标记为已过时的任何\n"
"其他模式。"
-#. label for 'Rec' pattern key
-#: src/modules/AddOnCreator.rb:481
+#. label for 'Rec' pattern key
+#: src/modules/AddOnCreator.rb:481
msgid "Recommended patterns"
msgstr "推荐的模式"
-#. help text for 'Rec' pattern key
-#: src/modules/AddOnCreator.rb:483
-msgid ""
-"A weak version of REQUIRES. If recommended patterns cannot be installed, no "
-"error is shown."
+#. help text for 'Rec' pattern key
+#: src/modules/AddOnCreator.rb:483
+msgid "A weak version of REQUIRES. If recommended patterns cannot be installed, no error is shown."
msgstr "REQUIRES 的较弱版本。如果无法安装推荐的模式，不会显示错误。"
-#. label for 'Sup' pattern key
-#: src/modules/AddOnCreator.rb:491
+#. label for 'Sup' pattern key
+#: src/modules/AddOnCreator.rb:491
msgid "Supplemented patterns"
msgstr "补充模式"
-#. help text for 'Sup' pattern key
-#: src/modules/AddOnCreator.rb:493
-msgid ""
-"A reverse <b>Rec</b>. This pattern is installed if the specified capability "
-"is provided by an installed resolvable. The dependency resolver installs it. "
-"Uninstalling it is silently accepted."
-msgstr ""
-"反向 <b>Rec</b>。如果已安装的组件提供了指定功能，将安装该模式。依赖性解析程序"
-"将安装它。卸载它将被接受而无反馈。"
+#. help text for 'Sup' pattern key
+#: src/modules/AddOnCreator.rb:493
+msgid "A reverse <b>Rec</b>. This pattern is installed if the specified capability is provided by an installed resolvable. The dependency resolver installs it. Uninstalling it is silently accepted."
+msgstr "反向 <b>Rec</b>。如果已安装的组件提供了指定功能，将安装该模式。依赖性解析程序将安装它。卸载它将被接受而无反馈。"
-#. label for 'Sug' pattern key
-#: src/modules/AddOnCreator.rb:501
+#. label for 'Sug' pattern key
+#: src/modules/AddOnCreator.rb:501
msgid "Suggested patterns"
msgstr "建议的模式"
-#. label for 'Fre' pattern key
-#: src/modules/AddOnCreator.rb:511
+#. label for 'Fre' pattern key
+#: src/modules/AddOnCreator.rb:511
msgid "Freshen"
msgstr "刷新"
-#. help text for 'Fre' pattern key
-#: src/modules/AddOnCreator.rb:513
-msgid ""
-"The current pattern is only considered for installation if the pattern "
-"specified here is installed."
+#. help text for 'Fre' pattern key
+#: src/modules/AddOnCreator.rb:513
+msgid "The current pattern is only considered for installation if the pattern specified here is installed."
msgstr "仅当此处指定的模式已安装时，才考虑安装当前模式。"
-#. label for 'Ext' pattern key
-#: src/modules/AddOnCreator.rb:523
+#. label for 'Ext' pattern key
+#: src/modules/AddOnCreator.rb:523
msgid "Extends"
msgstr "扩展"
-#. label for 'Inc' pattern key
-#: src/modules/AddOnCreator.rb:529
+#. label for 'Inc' pattern key
+#: src/modules/AddOnCreator.rb:529
msgid "Includes"
msgstr "包含"
-#. label for 'Exnh pattern key
-#: src/modules/AddOnCreator.rb:535
+#. label for 'Exnh pattern key
+#: src/modules/AddOnCreator.rb:535
msgid "Enhanced patterns"
msgstr "增强模式"
-#. label for 'Pcn' pattern key
-#: src/modules/AddOnCreator.rb:541
+#. label for 'Pcn' pattern key
+#: src/modules/AddOnCreator.rb:541
msgid "Conflicting packages"
msgstr "有冲突的包"
-#. label for 'Pob' pattern key
-#: src/modules/AddOnCreator.rb:547
+#. label for 'Pob' pattern key
+#: src/modules/AddOnCreator.rb:547
msgid "Obsolete packages"
msgstr "过时的包"
-#. label for 'Pfr' pattern key
-#: src/modules/AddOnCreator.rb:553
+#. label for 'Pfr' pattern key
+#: src/modules/AddOnCreator.rb:553
msgid "Freshened packages"
msgstr "已刷新的包"
-#. label for 'Psp' pattern key
-#: src/modules/AddOnCreator.rb:559
+#. label for 'Psp' pattern key
+#: src/modules/AddOnCreator.rb:559
msgid "Supplemented packages"
msgstr "补充的包"
-#. label for 'Pen' pattern key
-#: src/modules/AddOnCreator.rb:565
+#. label for 'Pen' pattern key
+#: src/modules/AddOnCreator.rb:565
msgid "Enhanced packages"
msgstr "增强的包"
-#. help text for 'Des' key
-#: src/modules/AddOnCreator.rb:581
+#. help text for 'Des' key
+#: src/modules/AddOnCreator.rb:581
msgid "Multiple line package description."
msgstr "多行包说明。"
-#. help text for 'Sum' key
-#: src/modules/AddOnCreator.rb:591
+#. help text for 'Sum' key
+#: src/modules/AddOnCreator.rb:591
msgid "The package summary (label), a one line description of the package."
msgstr "包摘要（标签），包的单行说明。"
-#. label for 'Ins' key
-#: src/modules/AddOnCreator.rb:599
+#. label for 'Ins' key
+#: src/modules/AddOnCreator.rb:599
msgid "Installation Notification"
msgstr "安装通知"
-#. help text for 'Ins' key
-#: src/modules/AddOnCreator.rb:601
-msgid ""
-"An informal message shown to the user if the package is selected, such as a "
-"test version warning or a commercial license."
+#. help text for 'Ins' key
+#: src/modules/AddOnCreator.rb:601
+msgid "An informal message shown to the user if the package is selected, such as a test version warning or a commercial license."
msgstr "选择包时向用户显示的非正式讯息，例如测试版本警告或商业许可。"
-#. label for 'Del' key
-#: src/modules/AddOnCreator.rb:608
+#. label for 'Del' key
+#: src/modules/AddOnCreator.rb:608
msgid "Deletion Notification"
msgstr "删除通知"
-#. help text for 'Del' key
-#: src/modules/AddOnCreator.rb:610
-msgid ""
-"An informal message shown to the user if the package is selected for "
-"deletion, such as a warning that the system is unusable without the package."
-msgstr ""
-"选择要删除的包时向用户显示的非正式讯息，例如缺少了该包系统将无法使用的警告。"
+#. help text for 'Del' key
+#: src/modules/AddOnCreator.rb:610
+msgid "An informal message shown to the user if the package is selected for deletion, such as a warning that the system is unusable without the package."
+msgstr "选择要删除的包时向用户显示的非正式讯息，例如缺少了该包系统将无法使用的警告。"
-#. label for 'Eul' key
-#: src/modules/AddOnCreator.rb:617
+#. label for 'Eul' key
+#: src/modules/AddOnCreator.rb:617
msgid "EULA"
msgstr "EULA"
-#. help text for 'Eul' key
-#: src/modules/AddOnCreator.rb:619
-msgid ""
-"Text of the EULA. This text is displayed before the package installation. If "
-"the user does not accept the EULA, the package is not installed."
-msgstr ""
-"EULA 文本。将在安装包之前显示此文本。如果用户不接受 EULA，将不安装该包。"
+#. help text for 'Eul' key
+#: src/modules/AddOnCreator.rb:619
+msgid "Text of the EULA. This text is displayed before the package installation. If the user does not accept the EULA, the package is not installed."
+msgstr "EULA 文本。将在安装包之前显示此文本。如果用户不接受 EULA，将不安装该包。"
-#. label of key
-#: src/modules/AddOnCreator.rb:660
+#. label of key
+#: src/modules/AddOnCreator.rb:660
msgid "Products that must be installed"
msgstr "必须安装的产品"
-#. help text for 'REQUIRES' key
-#: src/modules/AddOnCreator.rb:662
-msgid ""
-"<p>Resolvables that must be installed on the system to meet product "
-"requirements.</p>"
+#. help text for 'REQUIRES' key
+#: src/modules/AddOnCreator.rb:662
+msgid "<p>Resolvables that must be installed on the system to meet product requirements.</p>"
msgstr "<p>必须安装在系统上以满足产品需要的可解析项。</p>"
-#. label of PROVIDES key
-#: src/modules/AddOnCreator.rb:670
+#. label of PROVIDES key
+#: src/modules/AddOnCreator.rb:670
msgid "Provided products"
msgstr "已提供的产品"
-#. help text for 'PROVIDES' key
-#: src/modules/AddOnCreator.rb:672
-msgid ""
-"Capabilities this product provides. They can be used to match <b>requires from others."
+#. help text for 'PROVIDES' key
+#: src/modules/AddOnCreator.rb:672
+msgid "Capabilities this product provides. They can be used to match <b>requires</b> from others."
msgstr "该产品提供的功能。可以使用这些功能来匹配其他产品的<b>要求</b>。"
-#. label of 'CONFLICTS' key
-#: src/modules/AddOnCreator.rb:680
+#. label of 'CONFLICTS' key
+#: src/modules/AddOnCreator.rb:680
msgid "Conflicting products"
msgstr "冲突的产品"
-#. help text for 'CONFLICTS' key
-#: src/modules/AddOnCreator.rb:682
-msgid ""
-"This resolvable cannot be installed if the specified resolvable or one that "
-"provides the capability is installed."
-msgstr ""
-"如果指定的可解析对象或提供该功能的可解析对象已安装，则无法安装该可解析对象。"
+#. help text for 'CONFLICTS' key
+#: src/modules/AddOnCreator.rb:682
+msgid "This resolvable cannot be installed if the specified resolvable or one that provides the capability is installed."
+msgstr "如果指定的可解析对象或提供该功能的可解析对象已安装，则无法安装该可解析对象。"
-#. label of 'OBSOLETES' key
-#: src/modules/AddOnCreator.rb:690
+#. label of 'OBSOLETES' key
+#: src/modules/AddOnCreator.rb:690
msgid "Products made obsolete"
msgstr "已过时的产品"
-#. help text for 'OBSOLETES' key
-#: src/modules/AddOnCreator.rb:692
-msgid ""
-"When this resolvable is installed, it uninstalls any other resolvable with a "
-"name matching this keyword."
+#. help text for 'OBSOLETES' key
+#: src/modules/AddOnCreator.rb:692
+msgid "When this resolvable is installed, it uninstalls any other resolvable with a name matching this keyword."
msgstr "安装该可解析对象时，将卸装名称和该关键字匹配的任何其他可解析对象。"
-#. label of 'RECOMMENDS' key
-#: src/modules/AddOnCreator.rb:700
+#. label of 'RECOMMENDS' key
+#: src/modules/AddOnCreator.rb:700
msgid "Recommended products"
msgstr "推荐产品"
-#. help text for 'RECOMMENDS' key
-#: src/modules/AddOnCreator.rb:702
-msgid ""
-"A weak version of <b>requires</b>. An attempt is made to fulfill "
-"<b>RECOMMENDS</b>, but they are silently ignored if no match is possible."
-msgstr ""
-"<b>必需</b>的稍弱版本。已尝试完成<b>建议</b>，但如果无匹配，它们将被忽略而无"
-"反馈。"
+#. help text for 'RECOMMENDS' key
+#: src/modules/AddOnCreator.rb:702
+msgid "A weak version of <b>requires</b>. An attempt is made to fulfill <b>RECOMMENDS</b>, but they are silently ignored if no match is possible."
+msgstr "<b>必需</b>的稍弱版本。已尝试完成<b>建议</b>，但如果无匹配，它们将被忽略而无反馈。"
-#. label of 'SUGGESTS' key
-#: src/modules/AddOnCreator.rb:710
+#. label of 'SUGGESTS' key
+#: src/modules/AddOnCreator.rb:710
msgid "Suggested products"
msgstr "建议产品"
-#. table item label
-#: src/modules/AddOnCreator.rb:725
+#. table item label
+#: src/modules/AddOnCreator.rb:725
msgid "The URL for release notes RPM"
msgstr "发行说明 RPM 的 URL"
-#. table item label
-#: src/modules/AddOnCreator.rb:730
+#. table item label
+#: src/modules/AddOnCreator.rb:730
msgid "Product description"
msgstr "产品描述"
-#. table item label
-#: src/modules/AddOnCreator.rb:740
+#. table item label
+#: src/modules/AddOnCreator.rb:740
msgid "Product summary"
msgstr "产品摘要"
-#. table item label
-#: src/modules/AddOnCreator.rb:745
+#. table item label
+#: src/modules/AddOnCreator.rb:745
msgid "Product line"
msgstr "产品系列"
-#. help text for 'productline' key
-#: src/modules/AddOnCreator.rb:747
-msgid ""
-"A short name for the product, which does not change between service packs "
-"and versions."
+#. help text for 'productline' key
+#: src/modules/AddOnCreator.rb:747
+msgid "A short name for the product, which does not change between service packs and versions."
msgstr "产品的短名称，不会在服务包和版本间更改。。"
-#. table item label
-#: src/modules/AddOnCreator.rb:754
+#. table item label
+#: src/modules/AddOnCreator.rb:754
msgid "Update repository key"
msgstr "更新安装源密钥"
-#. table item label
-#: src/modules/AddOnCreator.rb:759
+#. table item label
+#: src/modules/AddOnCreator.rb:759
msgid "Type of media"
msgstr "媒体类型"
-#. help text for media type
-#: src/modules/AddOnCreator.rb:761
-msgid ""
-"Type of media that will be used for target product. Possible values are: cd, "
-"ftp, dvd5, dvd9."
+#. help text for media type
+#: src/modules/AddOnCreator.rb:761
+msgid "Type of media that will be used for target product. Possible values are: cd, ftp, dvd5, dvd9."
msgstr "将用于目标产品的媒体类型。可能的值为：cd、ftp、dvd5 和 dvd9。"
-#. table item label
-#: src/modules/AddOnCreator.rb:768
+#. table item label
+#: src/modules/AddOnCreator.rb:768
msgid "Product flavor"
msgstr "产品风格"
-#. help text for media type
-#: src/modules/AddOnCreator.rb:770
+#. help text for media type
+#: src/modules/AddOnCreator.rb:770
msgid "Description of the flavor or variant of a product, e.g. DVD, FTP, Live"
msgstr "产品风格或变体的描述，例如，DVD、FTP 和 Live"
-#. AddOnCreator Build dialog caption
-#: src/modules/AddOnCreator.rb:1694
+#. AddOnCreator Build dialog caption
+#: src/modules/AddOnCreator.rb:1694
msgid "Generating Product Data"
msgstr "生成产品数据"
-#. Progress stage
-#: src/modules/AddOnCreator.rb:1698
+#. Progress stage
+#: src/modules/AddOnCreator.rb:1698
msgid "Find package directories"
msgstr "查找包目录"
-#. Progress step
-#: src/modules/AddOnCreator.rb:1702
+#. Progress step
+#: src/modules/AddOnCreator.rb:1702
msgid "Looking for package directories..."
msgstr "正在查找包目录..."
-#. Progress stage
-#: src/modules/AddOnCreator.rb:1709
+#. Progress stage
+#: src/modules/AddOnCreator.rb:1709
msgid "Check package architectures"
msgstr "检查包体系结构"
-#. Progress stage
-#: src/modules/AddOnCreator.rb:1711
+#. Progress stage
+#: src/modules/AddOnCreator.rb:1711
msgid "Generate content file defaults"
msgstr "生成内容文件默认值"
-#. Progress step
-#: src/modules/AddOnCreator.rb:1718
+#. Progress step
+#: src/modules/AddOnCreator.rb:1718
msgid "Checking package architectures..."
msgstr "正在检查包体系结构..."
-#. Progress step
-#: src/modules/AddOnCreator.rb:1720
+#. Progress step
+#: src/modules/AddOnCreator.rb:1720
msgid "Generating content file defaults..."
msgstr "正在生成内容文件默认值..."
-#. Progress stage
-#. Progress step
-#: src/modules/AddOnCreator.rb:1728 src/modules/AddOnCreator.rb:1735
+#. Progress stage
+#. Progress step
+#: src/modules/AddOnCreator.rb:1728 src/modules/AddOnCreator.rb:1735
msgid "Generate package descriptions"
msgstr "生成包说明"
-#. help text
-#: src/modules/AddOnCreator.rb:1746
+#. help text
+#: src/modules/AddOnCreator.rb:1746
msgid "<b>Wait while generating data for add-on...</b><br/>\n"
msgstr "<b>正在生成外接式附件的数据，请稍侯...</b><br>\n"
-#. error report
-#: src/modules/AddOnCreator.rb:2730
+#. error report
+#: src/modules/AddOnCreator.rb:2730
msgid ""
"Failed to install obs-productconverter package.\n"
"Release package will not be generated."
@@ -2123,8 +1927,8 @@
"未能安装 obs-productconverter 包。\n"
"将不会生成版本包。"
-#. error popup
-#: src/modules/AddOnCreator.rb:2923
+#. error popup
+#: src/modules/AddOnCreator.rb:2923
msgid ""
"Build of release package failed with\n"
"'%1'."
@@ -2132,18 +1936,18 @@
"使用“%1”构建版本包\n"
"失败。"
-#. error label
-#: src/modules/AddOnCreator.rb:3283
+#. error label
+#: src/modules/AddOnCreator.rb:3283
msgid "Signing of the product failed."
msgstr "对产品签名失败。"
-#. checkbox label
-#: src/modules/AddOnCreator.rb:3301
+#. checkbox label
+#: src/modules/AddOnCreator.rb:3301
msgid "Try again with different passphrase"
msgstr "重试另一个通行口令"
-#. ask for pw now %1 is key id, %2 user name
-#: src/modules/AddOnCreator.rb:3857
+#. ask for pw now %1 is key id, %2 user name
+#: src/modules/AddOnCreator.rb:3857
msgid ""
"Enter passphrase for GPG key %1\n"
"(%2)"
@@ -2151,102 +1955,102 @@
"输入 GPG 密钥 %1 的通行口令\n"
"(%2)"
-#. AddOnCreator Build dialog caption
-#: src/modules/AddOnCreator.rb:3879
+#. AddOnCreator Build dialog caption
+#: src/modules/AddOnCreator.rb:3879
msgid "Creating the Add-On"
msgstr "创建外接式附件"
-#. Progress stage
-#: src/modules/AddOnCreator.rb:3883
+#. Progress stage
+#: src/modules/AddOnCreator.rb:3883
msgid "Write the content file"
msgstr "写入内容文件"
-#. Progress stage
-#: src/modules/AddOnCreator.rb:3885
+#. Progress stage
+#: src/modules/AddOnCreator.rb:3885
msgid "Create the structure of the add-on"
msgstr "创建附加结构"
-#. Progress stage
-#: src/modules/AddOnCreator.rb:3887
+#. Progress stage
+#: src/modules/AddOnCreator.rb:3887
msgid "Write the patterns"
msgstr "编写模式"
-#. Progress stage
-#: src/modules/AddOnCreator.rb:3889
+#. Progress stage
+#: src/modules/AddOnCreator.rb:3889
msgid "Copy the packages"
msgstr "复制包"
-#. Progress stage
-#: src/modules/AddOnCreator.rb:3891
+#. Progress stage
+#: src/modules/AddOnCreator.rb:3891
msgid "Generate the release package"
msgstr "生成版本包"
-#. Progress stage
-#: src/modules/AddOnCreator.rb:3893
+#. Progress stage
+#: src/modules/AddOnCreator.rb:3893
msgid "Create MD5 sums"
msgstr "创建 MD5 和"
-#. Progress stage
-#: src/modules/AddOnCreator.rb:3895
+#. Progress stage
+#: src/modules/AddOnCreator.rb:3895
msgid "Sign resulting product"
msgstr "为最终产品签名"
-#. Progress step
-#: src/modules/AddOnCreator.rb:3899
+#. Progress step
+#: src/modules/AddOnCreator.rb:3899
msgid "Writing the content file..."
msgstr "正在写入内容文件..."
-#. Progress step
-#: src/modules/AddOnCreator.rb:3901
+#. Progress step
+#: src/modules/AddOnCreator.rb:3901
msgid "Creating the structure of the add-on..."
msgstr "正在创建附加结构..."
-#. Progress stage
-#: src/modules/AddOnCreator.rb:3903
+#. Progress stage
+#: src/modules/AddOnCreator.rb:3903
msgid "Writing the patterns..."
msgstr "正在写入模式..."
-#. Progress step
-#: src/modules/AddOnCreator.rb:3905
+#. Progress step
+#: src/modules/AddOnCreator.rb:3905
msgid "Copying the packages..."
msgstr "正在复制包..."
-#. Progress stage
-#: src/modules/AddOnCreator.rb:3907
+#. Progress stage
+#: src/modules/AddOnCreator.rb:3907
msgid "Generating the release package..."
msgstr "正在生成版本包..."
-#. Progress step
-#: src/modules/AddOnCreator.rb:3909
+#. Progress step
+#: src/modules/AddOnCreator.rb:3909
msgid "Creating MD5 sums..."
msgstr "正在创建 MD5 和..."
-#. Progress stage
-#: src/modules/AddOnCreator.rb:3911
+#. Progress stage
+#: src/modules/AddOnCreator.rb:3911
msgid "Signing resulting product..."
msgstr "正在为最终产品签名..."
-#. Progress stage
-#: src/modules/AddOnCreator.rb:3916
+#. Progress stage
+#: src/modules/AddOnCreator.rb:3916
msgid "Create ISO image"
msgstr "创建 ISO 映像"
-#. Progress step
-#: src/modules/AddOnCreator.rb:3918
+#. Progress step
+#: src/modules/AddOnCreator.rb:3918
msgid "Creating ISO image..."
msgstr "正在创建 ISO 映像..."
-#. Progress finished
-#: src/modules/AddOnCreator.rb:3921
+#. Progress finished
+#: src/modules/AddOnCreator.rb:3921
msgid "Finished"
msgstr "已完成"
-#. Error message (do not translate 'content'
-#: src/modules/AddOnCreator.rb:3957
+#. Error message (do not translate 'content'
+#: src/modules/AddOnCreator.rb:3957
msgid "Cannot write content file."
msgstr "无法写入内容文件。"
-#. Error message
-#: src/modules/AddOnCreator.rb:3978
+#. Error message
+#: src/modules/AddOnCreator.rb:3978
msgid "Cannot create the output directory structure."
msgstr "无法创建输出目录结构。"
Modified: branches/SLE12-SP2/yast/zh_CN/po/add-on.zh_CN.po
===================================================================
--- branches/SLE12-SP2/yast/zh_CN/po/add-on.zh_CN.po 2016-09-15 14:04:11 UTC (rev 96924)
+++ branches/SLE12-SP2/yast/zh_CN/po/add-on.zh_CN.po 2016-09-15 14:54:06 UTC (rev 96925)
@@ -14,8 +14,8 @@
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#. TRANSLATORS: commandline help
-#: src/clients/add-on.rb:41
+#. TRANSLATORS: commandline help
+#: src/clients/add-on.rb:41
msgid ""
"\n"
"Add-on Module Help\n"
@@ -49,106 +49,102 @@
"cd://\n"
"dvd://\n"
-#: src/clients/add-on.rb:64
-msgid ""
-"Target file name ('xmlfile' option) is missing. Use "
-"xmlfile=\n"
"<dt>* Virtual server port is 21: ftp\n"
@@ -549,9 +411,7 @@
"\n"
"\n"
"</dt><dt><b><big>check command</big> = \"</b><i>path to script</i><b>\"</b>\n"
-"<p>This setting is used if checktype is external and is the command to be "
-"run to check the status of a real server. It should exit with status 0 if "
-"everything\n"
+"<p>This setting is used if checktype is external and is the command to be run to check the status of a real server. It should exit with status 0 if everything\n"
"is ok, or non-zero otherwise.\n"
"</p><p>Four parameters are passed to the script:\n"
"</p></dt><dt>* virtual server ip/firewall mark\n"
@@ -562,105 +422,68 @@
"\n"
"\n"
"<p><b><big>check port</big> =</b> <i>n</i>\n"
-"</p><p>Number of port to monitor. Sometimes check port differs from service "
-"port.\n"
+"</p><p>Number of port to monitor. Sometimes check port differs from service port.\n"
"</p><p>Default: port specified for each real server\n"
"\n"
"\n"
-"</p><p><b><big>request</big> = \"</b><i>uri to requested object</i><b>\"\n"
-"</p><p>This object will be requested each checkinterval seconds on each real "
-"server. The string must be inside quotes. Note that this string may be "
-"overridden by\n"
+"</p><p><b><big>request</big> = \"</b><i>uri to requested object</i><b>\"</b>\n"
+"</p><p>This object will be requested each checkinterval seconds on each real server. The string must be inside quotes. Note that this string may be overridden by\n"
"an optional per real-server based request-string.\n"
-"</p><p>For a <small>DNS</small> check this should the name of an A record, "
-"or the address of a <small>PTR</small> record to look up.\n"
-"</p><p>For a MySQL, Oracle or PostgeSQL check, this should be an <small>SQL query. The data returned is not checked, only that the answer is one "
-"or more\n"
+"</p><p>For a <small>DNS</small> check this should the name of an A record, or the address of a <small>PTR</small> record to look up.\n"
+"</p><p>For a MySQL, Oracle or PostgeSQL check, this should be an <small>SQL</small> query. The data returned is not checked, only that the answer is one or more\n"
"rows. This is a required setting.\n"
-"</p><p>For a simpletcp check, this string is sent verbatim except any "
-"occurances of \n"
+"</p><p>For a simpletcp check, this string is sent verbatim except any occurances of \n"
" are replaced with a new line character.\n"
"\n"
"\n"
"</p><p><b><big>receive</big> = \"</b><i>regexp to compare</i><b>\"</b>\n"
-"</p><p>If the requested result contains this <i>regexp to compare</i>, the "
-"real server is declared alive. The regexp must be inside quotes. Keep in "
-"mind that\n"
-"regexps are not plain strings and that you need to escape the special "
-"characters if they should as literals. Note that this regexp may be "
-"overridden by an\n"
+"</p><p>If the requested result contains this <i>regexp to compare</i>, the real server is declared alive. The regexp must be inside quotes. Keep in mind that\n"
+"regexps are not plain strings and that you need to escape the special characters if they should as literals. Note that this regexp may be overridden by an\n"
"optional per real-server based receive regexp.\n"
-"</p><p>For a <small>DNS</small> check this should be any one the A record's "
-"addresses or any one of the <small>PTR</small> record's names.\n"
+"</p><p>For a <small>DNS</small> check this should be any one the A record's addresses or any one of the <small>PTR</small> record's names.\n"
"</p><p>For a MySQL check, the receive setting is not used.\n"
"\n"
"\n"
-"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD</b>\n"
-"</p><p>Sets the <small>HTTP</small> method which should be used to fetch the "
-"<small>URI</small> specified in the request-string. <small>GET</small> is "
-"the\n"
-"method used by default if the parameter is not set. If <small>HEAD</small> "
-"is used, the receive-string should be unset.\n"
+"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD</small></b>\n"
+"</p><p>Sets the <small>HTTP</small> method which should be used to fetch the <small>URI</small> specified in the request-string. <small>GET</small> is the\n"
+"method used by default if the parameter is not set. If <small>HEAD</small> is used, the receive-string should be unset.\n"
"</p><p>Default: <small>GET</small>\n"
"\n"
"\n"
"</p><p><b><big>virtual host</big> = \"</b><i>hostname</i><b>\"</b>\n"
-"</p><p>Used when using a negotiate check with <small>HTTP</small> or "
-"<small>HTTPS</small> . Sets the host header used in the <small>HTTP</small> "
-"request. In the\n"
-"case of <small>HTTPS</small> this generally needs to match the common name "
-"of the <small>SSL</small> certificate. If not set then the host header will "
-"be\n"
-"derived from the request url for the real server if present. As a last "
-"resort the <small>IP</small> address of the real server will be used.\n"
+"</p><p>Used when using a negotiate check with <small>HTTP</small> or <small>HTTPS</small> . Sets the host header used in the <small>HTTP</small> request. In the\n"
+"case of <small>HTTPS</small> this generally needs to match the common name of the <small>SSL</small> certificate. If not set then the host header will be\n"
+"derived from the request url for the real server if present. As a last resort the <small>IP</small> address of the real server will be used.\n"
"\n"
"\n"
"</p><p><b><big>login</big> = \"</b><i>username</i><b>\"</b>\n"
-"</p><p>For <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , "
-"MySQL, Oracle, <small>POP</small> and PostgreSQL, the username used to log "
-"in.\n"
+"</p><p>For <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , MySQL, Oracle, <small>POP</small> and PostgreSQL, the username used to log in.\n"
"</p><p>For Radius the passwd is used for the attribute User-Name.\n"
-"</p><p>For <small>SIP</small> , the username is used as both the to and from "
-"address for an <small>OPTIONS</small> query.\n"
+"</p><p>For <small>SIP</small> , the username is used as both the to and from address for an <small>OPTIONS</small> query.\n"
"</p><p>Default:\n"
"</p></dt><dt>* <small>FTP:</small> Anonymous\n"
-"</dt><dt>* MySQL Oracle, and PostgreSQL: Must be specified in the "
-"configuration\n"
-"</dt><dt>* <small>SIP:</small> ldirectord@<hostname>, hostname is "
-"derived as per the passwd option below.\n"
-"</dt><dt>* Otherwise: empty string, which denotes that case authentication "
-"will not be attempted.\n"
+"</dt><dt>* MySQL Oracle, and PostgreSQL: Must be specified in the configuration\n"
+"</dt><dt>* <small>SIP:</small> ldirectord@<hostname>, hostname is derived as per the passwd option below.\n"
+"</dt><dt>* Otherwise: empty string, which denotes that case authentication will not be attempted.\n"
"\n"
"\n"
"</dt><dt><b><big>password</big> = \"</b><i>password</i><b>\"</b>\n"
-"<p>Password to use to login to <small>FTP</small> , <small>IMAP</small> , "
-"<small>LDAP</small> , MySQL, Oracle, <small>POP</small> , PostgreSQL and\n"
+"<p>Password to use to login to <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , MySQL, Oracle, <small>POP</small> , PostgreSQL and\n"
"<small>SIP</small> servers.\n"
"</p><p>For Radius the passwd is used for the attribute User-Password.\n"
"</p><p>Default:\n"
-"</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>, where "
-"hostname is the environment variable <small>HOSTNAME</small> evaluated at "
-"run time, or sourced\n"
+"</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>, where hostname is the environment variable <small>HOSTNAME</small> evaluated at run time, or sourced\n"
"from uname if unset.\n"
-"</dt><dt>* Otherwise: empty string. In the case of <small>LDAP</small> , "
-"MySQL, Oracle, and PostgreSQL this means that authentication will not be "
-"performed.\n"
+"</dt><dt>* Otherwise: empty string. In the case of <small>LDAP</small> , MySQL, Oracle, and PostgreSQL this means that authentication will not be performed.\n"
"\n"
"\n"
"</dt><dt><b><big>database name</big> = \"</b><i>databasename</i><b>\"</b>\n"
-"<p>Database to use for MySQL, Oracle and PostgreSQL servers, this is the "
-"database that the query (set by <b>receive</b> above) will be performed "
-"against. This\n"
+"<p>Database to use for MySQL, Oracle and PostgreSQL servers, this is the database that the query (set by <b>receive</b> above) will be performed against. This\n"
"is a required setting.\n"
"\n"
"\n"
"</p><p><b><big>radius secret</big> = \"</b><i>radiussecret</i><b>\"</b>\n"
-"</p><p>Secret to use for Radius servers, this is the secret used to perform "
-"an Access-Request with the username (set by <b>login</b> above) and passwd "
-"(set by\n"
+"</p><p>Secret to use for Radius servers, this is the secret used to perform an Access-Request with the username (set by <b>login</b> above) and passwd (set by\n"
"<b>passwd</b> above).\n"
"</p><p>Default: empty string\n"
"\n"
@@ -674,188 +497,115 @@
"\n"
"\n"
"</p><p><b><big>scheduler</big> =</b> <i>scheduler_name</i>\n"
-"</p><p>Scheduler to be used by <small>LVS</small> for loadbalancing. For an "
-"information on the available sehedulers please see the <b>ipvsadm</a></b>(8) man page.\n"
+"</p><p>Scheduler to be used by <small>LVS</small> for loadbalancing. For an information on the available sehedulers please see the <b>ipvsadm</a></b>(8) man page.\n"
"</p><p>Default: \"wrr\"\n"
"\n"
"\n"
"</p><p><b><big>protocol</big> = tcp</b>|<b>udp</b>|<b>fwm</b>\n"
-"</p><p>Protocol to be used. If the virtual is specified as an <small>IP address and port then it must be one of tcp or udp. If a firewall "
-"mark then the\n"
+"</p><p>Protocol to be used. If the virtual is specified as an <small>IP</small> address and port then it must be one of tcp or udp. If a firewall mark then the\n"
"protocol must be fwm.\n"
"</p><p>Default:\n"
-"</p></dt><dt>* Virtual is an <small>IP</small> address and port, and the "
-"port is not 53: tcp\n"
-"</dt><dt>* Virtual is an <small>IP</small> address and port, and the port is "
-"53: udp\n"
+"</p></dt><dt>* Virtual is an <small>IP</small> address and port, and the port is not 53: tcp\n"
+"</dt><dt>* Virtual is an <small>IP</small> address and port, and the port is 53: udp\n"
"</dt><dt>* Virtual is a firewall mark: fwm\n"
"</dt></dl>\n"
"\n"
"\n"
"</p><p><b><big>check timeout</big> =</b> <i>n</i>\n"
-"</p><p>Timeout in seconds for connect, external and ping checks. If the "
-"timeout is exceeded then the real server is declared dead.\n"
-"</p><p>If defined in a virtual server section then the global value is "
-"overridden.\n"
-"</p><p>If undefined then the value of negotiatetimeout is used. "
-"negotiatetimeout is also a global value that may be overriden by a per-"
-"virtual setting.\n"
-"</p><p>If both checktimeout and negotiatetimeout are unset, the default is "
-"used.\n"
+"</p><p>Timeout in seconds for connect, external and ping checks. If the timeout is exceeded then the real server is declared dead.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>If undefined then the value of negotiatetimeout is used. negotiatetimeout is also a global value that may be overriden by a per-virtual setting.\n"
+"</p><p>If both checktimeout and negotiatetimeout are unset, the default is used.\n"
"</p><p>Default: 5 seconds\n"
"\n"
"</p><p><b><big>negotiate timeout</big> =</b> <i>n</i>\n"
"</p><p>Timeout in seconds for negotiate checks.\n"
-"</p><p>If defined in a virtual server section then the global value is "
-"overridden.\n"
-"</p><p>If undefined then the value of connecttimeout is used. connecttimeout "
-"is also a global value that may be overriden by a per-virtual setting.\n"
-"</p><p>If both negotiatetimeout and connecttimeout are unset, the default is "
-"used.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>If undefined then the value of connecttimeout is used. connecttimeout is also a global value that may be overriden by a per-virtual setting.\n"
+"</p><p>If both negotiatetimeout and connecttimeout are unset, the default is used.\n"
"</p><p>Default: 30 seconds\n"
"\n"
"</p><p><b><big>failure count</big> =</b> <i>n</i>\n"
-"</p><p>The number of consecutive times a failure will have to be reported by "
-"a check before the realserver is considered to have failed. A value of 1 "
-"will have the realserver considered failed on the first failure. A "
-"successful check will reset the failure counter to 0.\n"
-"</p><p>If defined in a virtual server section then the global value is "
-"overridden.\n"
+"</p><p>The number of consecutive times a failure will have to be reported by a check before the realserver is considered to have failed. A value of 1 will have the realserver considered failed on the first failure. A successful check will reset the failure counter to 0.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
"</p><p>Default: 1\n"
"\n"
"</p><p><b><big>email alert</big> = \"</b><i>emailaddress</i><b>\"</b>\n"
-"</p><p>A valid email address for sending alerts about the changed connection "
-"status to any real server defined in the virtual service. This option "
-"requires perl\n"
-"module MailTools to be installed. Automatically tries to send email using "
-"any of the built-in methods. See perldoc Mail::Mailer for more info on "
-"methods.\n"
-"</p><p>If defined in a virtual server section then the global value is "
-"overridden.\n"
+"</p><p>A valid email address for sending alerts about the changed connection status to any real server defined in the virtual service. This option requires perl\n"
+"module MailTools to be installed. Automatically tries to send email using any of the built-in methods. See perldoc Mail::Mailer for more info on methods.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
"\n"
"</p><p><b><big>email alert freq</big> =</b> <i>n</i>\n"
-"</p><p>Delay in seconds between repeating email alerts while any given real "
-"server in the virtual service remains inaccessible. A setting of zero "
-"seconds will\n"
-"inhibit the repeating alerts. The email timing accuracy of this setting is "
-"dependent on the number of seconds defined in the checkinterval "
-"configuration\n"
+"</p><p>Delay in seconds between repeating email alerts while any given real server in the virtual service remains inaccessible. A setting of zero seconds will\n"
+"inhibit the repeating alerts. The email timing accuracy of this setting is dependent on the number of seconds defined in the checkinterval configuration\n"
"option.\n"
-"</p><p>If defined in a virtual server section then the global value is "
-"overridden.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
"</p><p>Default: 0\n"
"\n"
-"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n"
-"</p><p>Comma delimited list of server states in which email alerts should be "
-"sent. <b>all</b> is a short-hand for\n"
-"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\". If "
-"<b>none</b> is specified, no other option may be specified, otherwise "
-"options are ORed\n"
+"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting</b>|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n"
+"</p><p>Comma delimited list of server states in which email alerts should be sent. <b>all</b> is a short-hand for\n"
+"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\". If <b>none</b> is specified, no other option may be specified, otherwise options are ORed\n"
"with each other.\n"
-"</p><p>If defined in a virtual server section then the global value is "
-"overridden.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
"</p><p>Default: all\n"
"\n"
-"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|"
-"sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n"
-"</p><p>the server onto which a webservice is redirected if all real servers "
-"are down. Typically this would be 127.0.0.1 with an emergency page.\n"
-"</p><p>If defined in a virtual server section then the global value is "
-"overridden.\n"
+"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n"
+"</p><p>the server onto which a webservice is redirected if all real servers are down. Typically this would be 127.0.0.1 with an emergency page.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
"\n"
"</p><p><b><big>quiescent</big> = yes</b>|<b>no</b>\n"
-"</p><p>If <i>yes</i>, then when real or failback servers are determined to "
-"be down, they are not actually removed from the kernel's <small>LVS</small> "
-"table.\n"
-"Rather, their weight is set to zero which means that no new connections will "
-"be accepted.\n"
-"</p><p>This has the side effect, that if the real server has persistent "
-"connections, new connections from any existing clients will continue to be "
-"routed to the\n"
-"real server, until the persistant timeout can expire. See ipvsadm for more "
-"information on persistant connections.\n"
+"</p><p>If <i>yes</i>, then when real or failback servers are determined to be down, they are not actually removed from the kernel's <small>LVS</small> table.\n"
+"Rather, their weight is set to zero which means that no new connections will be accepted.\n"
+"</p><p>This has the side effect, that if the real server has persistent connections, new connections from any existing clients will continue to be routed to the\n"
+"real server, until the persistant timeout can expire. See ipvsadm for more information on persistant connections.\n"
"</p><p>This side-effect can be avoided by running the following:\n"
"</p><p>echo 1 > /proc/sys/net/ipv4/vs/expire_quiescent_template\n"
-"</p><p>If the proc file isn't present this probably means that the kernel "
-"doesn't have lvs support, <small>LVS</small> support isn't loaded, or the "
-"kernel is too\n"
-"old to have the proc file. Running ipvsadm as root should load <small>LVS into the kernel if it is possible.\n"
-"</p><p>If <i>no</i>, then the real or failback servers will be removed from "
-"the kernel's <small>LVS</small> table. The default is <i>yes</i>.\n"
-"</p><p>If defined in a virtual server section then the global value is "
-"overridden.\n"
+"</p><p>If the proc file isn't present this probably means that the kernel doesn't have lvs support, <small>LVS</small> support isn't loaded, or the kernel is too\n"
+"old to have the proc file. Running ipvsadm as root should load <small>LVS</small> into the kernel if it is possible.\n"
+"</p><p>If <i>no</i>, then the real or failback servers will be removed from the kernel's <small>LVS</small> table. The default is <i>yes</i>.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
"</p><p>Default: <i>yes</i>\n"
"\n"
"\n"
"\n"
msgstr ""
"\n"
-"<p><b><big>virtual server</big> =</b> <i>(ip_address|hostname:portnumber|"
-"servicename)|firewall-mark</i>\n"
-"</p><p>按 IP 地址（或主机名）和端口（或服务名称）或防火墙标记定义虚拟服务。防"
-"火墙标记是大于零的整数。使用\n"
-"<b>ipchains</b>(8) 的 <tt>\"-m\"</tt> 选项控制标记包的配置。虚拟服务的所有真"
-"实服务和标志\n"
+"<p><b><big>virtual server</big> =</b> <i>(ip_address|hostname:portnumber|servicename)|firewall-mark</i>\n"
+"</p><p>按 IP 地址（或主机名）和端口（或服务名称）或防火墙标记定义虚拟服务。防火墙标记是大于零的整数。使用\n"
+"<b>ipchains</b>(8) 的 <tt>\"-m\"</tt> 选项控制标记包的配置。虚拟服务的所有真实服务和标志\n"
"必须紧跟在此行之后，并且必须缩排。\n"
"\n"
"\n"
-"</p><p><b><big>real servers</big> =</b> <i>ip_address|hostname[->"
-"ip_address|hostname][:portnumber|servicename</i>]\n"
-"<b>gate</b>|<b>masq</b>|<b>ipip</b> [<i>weight</i>] [<b>\"</b><i>request<b>\", \"</b><i>receive</i><b>\"</b>]\n"
-"</p><p>按 IP 地址（或主机名）和端口（或服务名称）定义真实服务。如果省略端口，"
-"将使用 0，该值主要用于\n"
-"其中忽略了真实服务器端口的防火墙标记服务。或者，也可以指定 <small>IP</small> "
-"地址范围（或两个主机名），在此情况下，\n"
-"该范围中的每个 <small>IP</small> 地址都会被视为使用给定端口的一个真实服务器。"
-"第二个自变量定义转发方法，它必须是\n"
-"<b>gate</b>、<b>ipip</b> 或 <b>masq</b>。第三个自变量是可选的，用于定义该真实"
-"服务器的权重。如果省略该自变量，将使用权重\n"
-"1。最后两个自变量也是可选的。它们定义请求接收对，该对用于检查服务器是否处于活"
-"动状态。它们将会覆盖虚拟服务器部分中的\n"
-"请求接收对。这两个字符串必须括在引号中。如果请求字符串以 http://... 开头，真"
-"实服务器的\n"
+"</p><p><b><big>real servers</big> =</b> <i>ip_address|hostname[->ip_address|hostname][:portnumber|servicename</i>]\n"
+"<b>gate</b>|<b>masq</b>|<b>ipip</b> [<i>weight</i>] [<b>\"</b><i>request</i><b>\", \"</b><i>receive</i><b>\"</b>]\n"
+"</p><p>按 IP 地址（或主机名）和端口（或服务名称）定义真实服务。如果省略端口，将使用 0，该值主要用于\n"
+"其中忽略了真实服务器端口的防火墙标记服务。或者，也可以指定 <small>IP</small> 地址范围（或两个主机名），在此情况下，\n"
+"该范围中的每个 <small>IP</small> 地址都会被视为使用给定端口的一个真实服务器。第二个自变量定义转发方法，它必须是\n"
+"<b>gate</b>、<b>ipip</b> 或 <b>masq</b>。第三个自变量是可选的，用于定义该真实服务器的权重。如果省略该自变量，将使用权重\n"
+"1。最后两个自变量也是可选的。它们定义请求接收对，该对用于检查服务器是否处于活动状态。它们将会覆盖虚拟服务器部分中的\n"
+"请求接收对。这两个字符串必须括在引号中。如果请求字符串以 http://... 开头，真实服务器的\n"
"IP 地址和端口将会被覆盖，否则，将使用真实服务器的 IP 地址和端口。\n"
-"</p><p>对于 <small>TCP</small> 和 <small>UDP</small>（非防火墙标记）虚拟服"
-"务，除非转发方法为 masq 并且真实服务器的 <small>IP</small> 地址\n"
-"不在本地（不在运行 ldirectord 的主机中的某个接口上），否则真实服务器的端口会"
-"设置为其虚拟服务的\n"
-"端口。也就是说，仅当真实服务器是其他计算机并且转发方法是 masq 时，端口映射才"
-"可用。具体原因在于内核功能中\n"
+"</p><p>对于 <small>TCP</small> 和 <small>UDP</small>（非防火墙标记）虚拟服务，除非转发方法为 masq 并且真实服务器的 <small>IP</small> 地址\n"
+"不在本地（不在运行 ldirectord 的主机中的某个接口上），否则真实服务器的端口会设置为其虚拟服务的\n"
+"端口。也就是说，仅当真实服务器是其他计算机并且转发方法是 masq 时，端口映射才可用。具体原因在于内核功能中\n"
"底层 <small>LVS</small> 代码的运行方式。\n"
-"</p><p>这些项中的多个项可能位于虚拟部分中。上面列出的 checktimeout、"
-"negotiatetimeout、failurecount、fallback、emailalert、emailalertfreq 和\n"
+"</p><p>这些项中的多个项可能位于虚拟部分中。上面列出的 checktimeout、negotiatetimeout、failurecount、fallback、emailalert、emailalertfreq 和\n"
"quiescent 选项也可能在虚拟部分中，在此情况下，全局设置将会被覆盖。\n"
"\n"
"\n"
-"</p><p><b><big>check type</big> = connect</b>|<b>external</b>|<b>negotiate|<b>off</b>|<b>on</b>|<b>ping</b>|<b>checktimeout</b><i>N</i>\n"
-"</p><p>要执行的检查类型。如果指定 negotiate，则会发送请求并匹配接收字符串。如"
-"果指定 connect，则只尝试建立 <small>TCP/IP</small> 连接，因此，可以省略\n"
-"请求和接收字符串。如果 checktype 是数字，则 negotiate 和 connect 结合起来指定"
-"在每经过 N 次连接尝试后，执行\n"
-"一次协商尝试。通常，这可用于检查某个服务是否做出应答，执行协商检查的间隔要长"
-"得多。Ping 表示要使用\n"
-"<small>ICMP</small> ping 来测试真实服务器的可用性。Ping 也用来检查 "
-"<small>UDP</small> 服务的连接性。Off\n"
-"表示不进行检查，并且不激活任何真实服务器或回复服务器。On 表示不进行检查，并且"
-"始终激活真实\n"
+"</p><p><b><big>check type</big> = connect</b>|<b>external</b>|<b>negotiate</b>|<b>off</b>|<b>on</b>|<b>ping</b>|<b>checktimeout</b><i>N</i>\n"
+"</p><p>要执行的检查类型。如果指定 negotiate，则会发送请求并匹配接收字符串。如果指定 connect，则只尝试建立 <small>TCP/IP</small> 连接，因此，可以省略\n"
+"请求和接收字符串。如果 checktype 是数字，则 negotiate 和 connect 结合起来指定在每经过 N 次连接尝试后，执行\n"
+"一次协商尝试。通常，这可用于检查某个服务是否做出应答，执行协商检查的间隔要长得多。Ping 表示要使用\n"
+"<small>ICMP</small> ping 来测试真实服务器的可用性。Ping 也用来检查 <small>UDP</small> 服务的连接性。Off\n"
+"表示不进行检查，并且不激活任何真实服务器或回复服务器。On 表示不进行检查，并且始终激活真实\n"
"服务器。默认值为 <i>negotiate</i>。\n"
"\n"
"\n"
-"</p><p><b><big>service</big> = dns</b>|<b>ftp</b>|<b>http</b>|<b>https</b>|"
-"<b>imap</b>|<b>imaps</b>|<b>ldap</b>|<b>mysql</b>|<b>nntp</b>|<b>none</b>|"
-"<b>oracle</b>|<b>pgsql</b>|<b>pop</b>|<b>pops</b>|<b>radius</b>|"
-"<b>simpletcp</b>|<b>sip</b>|<b>smtp</b>\n"
+"</p><p><b><big>service</big> = dns</b>|<b>ftp</b>|<b>http</b>|<b>https</b>|<b>imap</b>|<b>imaps</b>|<b>ldap</b>|<b>mysql</b>|<b>nntp</b>|<b>none</b>|<b>oracle</b>|<b>pgsql</b>|<b>pop</b>|<b>pops</b>|<b>radius</b>|<b>simpletcp</b>|<b>sip</b>|<b>smtp</b>\n"
"</p><p>使用 checktype=negotiate 时要监视的服务类型。None 表示不监视服务。\n"
-"</p><p>如果指定 simpletcp，则将 <b>request</b> 字符串发送到服务器，并根据 "
-"<b>receive</b> regexp 测试该服务器。其他类型的检查将使用指定的协议连接到\n"
-"服务器。有关特定于协议的信息，请参见 <b>request</b> 和 <b>receive</b> 部"
-"分。\n"
+"</p><p>如果指定 simpletcp，则将 <b>request</b> 字符串发送到服务器，并根据 <b>receive</b> regexp 测试该服务器。其他类型的检查将使用指定的协议连接到\n"
+"服务器。有关特定于协议的信息，请参见 <b>request</b> 和 <b>receive</b> 部分。\n"
"</p><p>默认值：\n"
"</p>
\n"
"<dt>* 如果虚拟服务器端口是 21，则为：ftp\n"
@@ -878,8 +628,7 @@
"\n"
"\n"
"</dt><dt><b><big>check command</big> = \"</b><i>脚本的路径</i><b>\"</b>\n"
-"<p>如果 checktype 为 external，并且运行命令的目的是为了检查真实服务器状态，则"
-"使用此设置。如果一切正常，则此命令退出时应返回\n"
+"<p>如果 checktype 为 external，并且运行命令的目的是为了检查真实服务器状态，则使用此设置。如果一切正常，则此命令退出时应返回\n"
"状态 0，否则返回非零值。\n"
"</p><p>有四个参数会传递给脚本：\n"
"</p></dt><dt>* 虚拟服务器 IP/防火墙标记\n"
@@ -895,84 +644,63 @@
"\n"
"\n"
"</p><p><b><big>request</big> = \"</b><i>所请求对象的 URI</i><b>\"</b>\n"
-"</p><p>将在每个真实服务器上每隔 checkinterval 参数指定的秒数请求此对象一次。"
-"字符串必须括在引号中。请注意，此字符串可能会被可选的基于每个真实服务器的\n"
+"</p><p>将在每个真实服务器上每隔 checkinterval 参数指定的秒数请求此对象一次。字符串必须括在引号中。请注意，此字符串可能会被可选的基于每个真实服务器的\n"
"请求字符串覆盖。\n"
-"</p><p>对于 <small>DNS</small> 检查，这应该是 A 记录的名称，或者要查找的 "
-"<small>PTR</small> 记录的地址。\n"
-"</p><p>对于 MySQL、Oracle 或 PostgeSQL 检查，这应该是 <small>SQL</small> 查"
-"询。系统不会检查返回的数据，应答为一行或\n"
+"</p><p>对于 <small>DNS</small> 检查，这应该是 A 记录的名称，或者要查找的 <small>PTR</small> 记录的地址。\n"
+"</p><p>对于 MySQL、Oracle 或 PostgeSQL 检查，这应该是 <small>SQL</small> 查询。系统不会检查返回的数据，应答为一行或\n"
"多行。这是必需的设置。\n"
"</p><p>对于 simpletcp 检查，将按原义发送此字符串，不过，出现的所有 \n"
" 都将替换为换行符。\n"
"\n"
"\n"
"</p><p><b><big>receive</big> = \"</b><i>要比较的 regexp</i><b>\"</b>\n"
-"</p><p>如果请求的结果包含这个<i>要比较的 regexp</i>，则将真实服务器声明为活"
-"动。该 regexp 必须括在引号中。请记住，\n"
-"regexps 不是纯文本字符串，如果特殊字符应该以字面出现，则您需要转义这些字符。"
-"请注意，此 regexp 可能会被可选的基于每个真实服务器的\n"
+"</p><p>如果请求的结果包含这个<i>要比较的 regexp</i>，则将真实服务器声明为活动。该 regexp 必须括在引号中。请记住，\n"
+"regexps 不是纯文本字符串，如果特殊字符应该以字面出现，则您需要转义这些字符。请注意，此 regexp 可能会被可选的基于每个真实服务器的\n"
"接收 regexp 覆盖。\n"
-"</p><p>对于 <small>DNS</small> 检查，这应该是 A 记录的任一地址，或 "
-"<small>PTR</small> 记录的任一名称。\n"
+"</p><p>对于 <small>DNS</small> 检查，这应该是 A 记录的任一地址，或 <small>PTR</small> 记录的任一名称。\n"
"</p><p>对于 MySQL 检查，不使用 receive 设置。\n"
"\n"
"\n"
-"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD</b>\n"
-"</p><p>设置要用于提取 request 字符串中指定的 <small>URI</small> 的 "
-"<small>HTTP</small> 方法。如果不设置该参数，默认\n"
-"将使用 <small>GET</small> 方法。如果使用 <small>HEAD</small>，应取消设置接收"
-"字符串。\n"
+"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD</small></b>\n"
+"</p><p>设置要用于提取 request 字符串中指定的 <small>URI</small> 的 <small>HTTP</small> 方法。如果不设置该参数，默认\n"
+"将使用 <small>GET</small> 方法。如果使用 <small>HEAD</small>，应取消设置接收字符串。\n"
"</p><p>默认值：<small>GET</small>\n"
"\n"
"\n"
"</p><p><b><big>virtual host</big> = \"</b><i>hostname</i><b>\"</b>\n"
-"</p><p>将 negotiate check 与 <small>HTTP</small> 或 <small>HTTPS</small> 结合"
-"使用时使用。设置 <small>HTTP</small> 请求中使用的主机报头。对于\n"
-"<small>HTTPS</small>，这通常需要与 <small>SSL</small> 证书的常用名匹配。如果"
-"不设置此参数，则从真实服务器\n"
-"的请求 URL（如果存在）派生主机报头。最后的办法是使用真实服务器的 <small>IP 地址。\n"
+"</p><p>将 negotiate check 与 <small>HTTP</small> 或 <small>HTTPS</small> 结合使用时使用。设置 <small>HTTP</small> 请求中使用的主机报头。对于\n"
+"<small>HTTPS</small>，这通常需要与 <small>SSL</small> 证书的常用名匹配。如果不设置此参数，则从真实服务器\n"
+"的请求 URL（如果存在）派生主机报头。最后的办法是使用真实服务器的 <small>IP</small> 地址。\n"
"\n"
"\n"
"</p><p><b><big>login</big> = \"</b><i>username</i><b>\"</b>\n"
-"</p><p>对于 <small>FTP</small>、<small>IMAP</small>、<small>LDAP</small>、"
-"MySQL、Oracle、<small>POP</small> 和 PostgreSQL，此为用于登录的用户名。\n"
+"</p><p>对于 <small>FTP</small>、<small>IMAP</small>、<small>LDAP</small>、MySQL、Oracle、<small>POP</small> 和 PostgreSQL，此为用于登录的用户名。\n"
"</p><p>对于 Radius，此为用于属性 User-Password 的 passwd。\n"
-"</p><p>对于 <small>SIP</small>，此为用作 <small>OPTIONS</small> 查询的目标地"
-"址和来源地址的用户名。\n"
+"</p><p>对于 <small>SIP</small>，此为用作 <small>OPTIONS</small> 查询的目标地址和来源地址的用户名。\n"
"</p><p>默认值：\n"
"</p></dt><dt>* <small>FTP：</small>Anonymous\n"
"</dt><dt>* MySQL Oracle 和 PostgreSQL：必须在配置中指定\n"
-"</dt><dt>* <small>SIP：</small>ldirectord@<hostname>，hostname 根据下面"
-"的 passwd 选项派生。\n"
+"</dt><dt>* <small>SIP：</small>ldirectord@<hostname>，hostname 根据下面的 passwd 选项派生。\n"
"</dt><dt>* 其他：空字符串，表示不尝试大小写身份验证。\n"
"\n"
"\n"
"</dt><dt><b><big>password</big> = \"</b><i>password</i><b>\"</b>\n"
-"<p>用于登录 <small>FTP</small>、<small>IMAP</small>、<small>LDAP</small>、"
-"MySQL、Oracle、<small>POP</small>、PostgreSQL 和\n"
+"<p>用于登录 <small>FTP</small>、<small>IMAP</small>、<small>LDAP</small>、MySQL、Oracle、<small>POP</small>、PostgreSQL 和\n"
"<small>SIP</small> 服务器的口令。\n"
"</p><p>对于 Radius，此为用于属性 User-Password 的 passwd。\n"
"</p><p>默认值：\n"
-"</p></dt><dt>* <small>FTP：</small>ldirectord@<hostname>，其中，"
-"hostname 是运行时求值的环境变量 <small>HOSTNAME</small>，如果未设置该变量，则"
-"根据\n"
+"</p></dt><dt>* <small>FTP：</small>ldirectord@<hostname>，其中，hostname 是运行时求值的环境变量 <small>HOSTNAME</small>，如果未设置该变量，则根据\n"
" uname 派生。\n"
-"</dt><dt>* 其他：空字符串。对于 <small>LDAP</small>、MySQL、Oracle 和 "
-"PostgreSQL 而言，这表示不执行身份验证。\n"
+"</dt><dt>* 其他：空字符串。对于 <small>LDAP</small>、MySQL、Oracle 和 PostgreSQL 而言，这表示不执行身份验证。\n"
"\n"
"\n"
"</dt><dt><b><big>database name</big> = \"</b><i>databasename</i><b>\"</b>\n"
-"<p>用于 MySQL、Oracle 和 PostgreSQL 服务器的数据库，这是要针对其执行查询（由"
-"上面的 <b>receive</b> 设置）的数据库。这是\n"
+"<p>用于 MySQL、Oracle 和 PostgreSQL 服务器的数据库，这是要针对其执行查询（由上面的 <b>receive</b> 设置）的数据库。这是\n"
"必需的设置。\n"
"\n"
"\n"
"</p><p><b><big>radius secret</big> = \"</b><i>radiussecret</i><b>\"</b>\n"
-"</p><p>用于 Radius 服务器的机密，这是用于结合 username（由上面的 <b>login 设置）和 passwd（由上面的\n"
+"</p><p>用于 Radius 服务器的机密，这是用于结合 username（由上面的 <b>login</b> 设置）和 passwd（由上面的\n"
"<b>passwd</b> 设置）执行访问请求的机密。\n"
"</p><p>默认值：空字符串\n"
"\n"
@@ -986,214 +714,191 @@
"\n"
"\n"
"</p><p><b><big>scheduler</big> =</b> <i>scheduler_name</i>\n"
-"</p><p><small>LVS</small> 用来进行负载平衡的调度程序。有关可用调度程序的信"
-"息，请参见 <b>ipvsadm</a></b>(8) 手册页。\n"
+"</p><p><small>LVS</small> 用来进行负载平衡的调度程序。有关可用调度程序的信息，请参见 <b>ipvsadm</a></b>(8) 手册页。\n"
"</p><p>默认值：\"wrr\"\n"
"\n"
"\n"
"</p><p><b><big>protocol</big> = tcp</b>|<b>udp</b>|<b>fwm</b>\n"
-"</p><p>要使用的协议。如果将 virtual 指定为 <small>IP</small> 地址和端口，则该"
-"值必须是 tcp 或 udp。如果指定防火墙标记，则\n"
+"</p><p>要使用的协议。如果将 virtual 指定为 <small>IP</small> 地址和端口，则该值必须是 tcp 或 udp。如果指定防火墙标记，则\n"
"protocol 必须是 fwm。\n"
"</p><p>默认值：\n"
-"</p></dt><dt>* 如果 Virtual 是 <small>IP</small> 地址和端口，并且端口不是 "
-"53，则默认值为：tcp\n"
-"</dt><dt>* 如果 Virtual 是 <small>IP</small> 地址和端口，并且端口是 53，则默"
-"认值为：udp\n"
+"</p></dt><dt>* 如果 Virtual 是 <small>IP</small> 地址和端口，并且端口不是 53，则默认值为：tcp\n"
+"</dt><dt>* 如果 Virtual 是 <small>IP</small> 地址和端口，并且端口是 53，则默认值为：udp\n"
"</dt><dt>* 如果 Virtual 是防火墙标记，则默认值为：fwm\n"
"</dt></dl>\n"
"\n"
"\n"
"</p><p><b><big>check timeout</big> =</b> <i>n</i>\n"
-"</p><p>连接、外部检查和 ping 检查的超时时间（以秒为单位）。如果超过超时时间，"
-"则将真实服务器声明为死亡。\n"
+"</p><p>连接、外部检查和 ping 检查的超时时间（以秒为单位）。如果超过超时时间，则将真实服务器声明为死亡。\n"
"</p><p>如果在虚拟服务器部分中定义该值，则会覆盖全局值。\n"
-"</p><p>如果未定义该值，则使用 negotiatetimeout 的值。Negotiatetimeout 也是个"
-"全局值，可能会被虚拟服务器级别的设置覆盖。\n"
+"</p><p>如果未定义该值，则使用 negotiatetimeout 的值。Negotiatetimeout 也是个全局值，可能会被虚拟服务器级别的设置覆盖。\n"
"</p><p>如果 checktimeout 和 negotiatetimeout 都未设置，则使用默认值。\n"
"</p><p>默认值：5 秒\n"
"\n"
"</p><p><b><big>negotiate timeout</big> =</b> <i>n</i>\n"
"</p><p>协商检查的超时时间（以秒为单位）。\n"
"</p><p>如果在虚拟服务器部分中定义该值，则会覆盖全局值。\n"
-"</p><p>如果未定义该值，则使用 connecttimeout 的值。Connecttimeout 也是个全局"
-"值，可能会被虚拟服务器级别的设置覆盖。\n"
+"</p><p>如果未定义该值，则使用 connecttimeout 的值。Connecttimeout 也是个全局值，可能会被虚拟服务器级别的设置覆盖。\n"
"</p><p>如果 negotiatetimeout 和 connecttimeout 都未设置，则使用默认值。\n"
"</p><p>默认值：30 秒\n"
"\n"
"</p><p><b><big>failure count</big> =</b> <i>n</i>\n"
-"</p><p>在将真实服务器视为有故障前，检查必须连续报告真实服务器发生故障的次数。"
-"如果指定值 1，则第一次发生故障时，就将真实服务器视为有故障。成功执行检查之"
-"后，会将故障计数器重设置为 0。\n"
+"</p><p>在将真实服务器视为有故障前，检查必须连续报告真实服务器发生故障的次数。如果指定值 1，则第一次发生故障时，就将真实服务器视为有故障。成功执行检查之后，会将故障计数器重设置为 0。\n"
"</p><p>如果在虚拟服务器部分中定义该值，则会覆盖全局值。\n"
"</p><p>默认值：1\n"
"\n"
"</p><p><b><big>email alert</big> = \"</b><i>emailaddress</i><b>\"</b>\n"
-"</p><p>一个有效的电子邮件地址，用于将有关连接状态已更改的警报发送到虚拟服务中"
-"定义的任何真实服务器。此选项要求安装 perl\n"
-"module MailTools。它会自动尝试使用任一内置方法发送电子邮件。有关各种方法的更"
-"多信息，请参见“perldoc Mail::Mailer”。\n"
+"</p><p>一个有效的电子邮件地址，用于将有关连接状态已更改的警报发送到虚拟服务中定义的任何真实服务器。此选项要求安装 perl\n"
+"module MailTools。它会自动尝试使用任一内置方法发送电子邮件。有关各种方法的更多信息，请参见“perldoc Mail::Mailer”。\n"
"</p><p>如果在虚拟服务器部分中定义该值，则会覆盖全局值。\n"
"\n"
"</p><p><b><big>email alert freq</big> =</b> <i>n</i>\n"
-"</p><p>当虚拟服务中的任一给定真实服务器持续不可访问时，两次重复发送电子邮件警"
-"报之间的延缓时间（以秒为单位）。设置为零秒会\n"
-"禁止重复警报。此设置的电子邮件计时准确性取决于 checkinterval 配置选项中定义"
-"的\n"
+"</p><p>当虚拟服务中的任一给定真实服务器持续不可访问时，两次重复发送电子邮件警报之间的延缓时间（以秒为单位）。设置为零秒会\n"
+"禁止重复警报。此设置的电子邮件计时准确性取决于 checkinterval 配置选项中定义的\n"
"秒数。\n"
"</p><p>如果在虚拟服务器部分中定义该值，则会覆盖全局值。\n"
"</p><p>默认值：0\n"
"\n"
-"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n"
-"</p><p>服务器状态的逗号分隔列表，服务器处于该状态时，应发送电子邮件警报。"
-"<b>all</b> 是\n"
-"“<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>”的简写。如果"
-"指定 <b>none</b>，则不能指定其他选项，否则，这些选项将会\n"
+"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting</b>|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n"
+"</p><p>服务器状态的逗号分隔列表，服务器处于该状态时，应发送电子邮件警报。<b>all</b> 是\n"
+"“<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>”的简写。如果指定 <b>none</b>，则不能指定其他选项，否则，这些选项将会\n"
"相互冲突。\n"
"</p><p>如果在虚拟服务器部分中定义该值，则会覆盖全局值。\n"
"</p><p>默认值：all\n"
"\n"
-"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|"
-"sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n"
-"</p><p>当所有真实服务器都停机时将 Web 服务重定向到的服务器。通常，这是地址为 "
-"127.0.0.1 的一个紧急页面。\n"
+"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n"
+"</p><p>当所有真实服务器都停机时将 Web 服务重定向到的服务器。通常，这是地址为 127.0.0.1 的一个紧急页面。\n"
"</p><p>如果在虚拟服务器部分中定义该值，则会覆盖全局值。\n"
"\n"
"</p><p><b><big>quiescent</big> = yes</b>|<b>no</b>\n"
-"</p><p>如果为 <i>yes</i>，则确定真实服务器或故障回复服务器已停机时，不会真正"
-"将它们从内核的 <small>LVS</small> 表中去除。\n"
+"</p><p>如果为 <i>yes</i>，则确定真实服务器或故障回复服务器已停机时，不会真正将它们从内核的 <small>LVS</small> 表中去除。\n"
"而是将它们的权重设置为零，也就是说，不接受任何新的连接。\n"
-"</p><p>这会造成负面影响：因为如果真实服务器具有永久连接，则来自任何现有客户端"
-"的新连接将继续路由到\n"
+"</p><p>这会造成负面影响：因为如果真实服务器具有永久连接，则来自任何现有客户端的新连接将继续路由到\n"
"真实服务器，直到永久超时失效。有关永久连接的更多信息，请参见“ipvsadm”。\n"
"</p><p>可通过运行以下命令避免这种负面影响：\n"
"</p><p>echo 1 > /proc/sys/net/ipv4/vs/expire_quiescent_template\n"
-"</p><p>如果 proc 文件不存在，则可能意味着内核不提供 lvs 支持、未装载 "
-"<small>LVS</small> 支持，或者内核太旧，\n"
-"不包含 proc 文件。在可能的情况下，以 root 身份运行 ipvsadm 应该可以将 "
-"<small>LVS</small> 载入内核。\n"
-"</p><p>如果为 <i>no</i>，则会从内核的 <small>LVS</small> 表中去除真实服务器或"
-"故障回复服务器。默认值为 <i>yes</i>。\n"
+"</p><p>如果 proc 文件不存在，则可能意味着内核不提供 lvs 支持、未装载 <small>LVS</small> 支持，或者内核太旧，\n"
+"不包含 proc 文件。在可能的情况下，以 root 身份运行 ipvsadm 应该可以将 <small>LVS</small> 载入内核。\n"
+"</p><p>如果为 <i>no</i>，则会从内核的 <small>LVS</small> 表中去除真实服务器或故障回复服务器。默认值为 <i>yes</i>。\n"
"</p><p>如果在虚拟服务器部分中定义该值，则会覆盖全局值。\n"
"</p><p>默认值：<i>yes</i>\n"
"\n"
"\n"
"\n"
-#. overwrite global value part
-#: src/include/iplb/vserver_conf.rb:146
+#. overwrite global value part
+#: src/include/iplb/vserver_conf.rb:146
msgid "Check Type"
msgstr "检查类型"
-#: src/include/iplb/vserver_conf.rb:150
+#: src/include/iplb/vserver_conf.rb:150
msgid "Check Port"
msgstr "检查端口"
-#: src/include/iplb/vserver_conf.rb:151
+#: src/include/iplb/vserver_conf.rb:151
msgid "Service"
msgstr "服务"
-#: src/include/iplb/vserver_conf.rb:152
+#: src/include/iplb/vserver_conf.rb:152
msgid "Check Command"
msgstr "检查命令"
-#: src/include/iplb/vserver_conf.rb:157
+#: src/include/iplb/vserver_conf.rb:157
msgid "Http Method"
msgstr "HTTP 方法"
-#: src/include/iplb/vserver_conf.rb:160
+#: src/include/iplb/vserver_conf.rb:160
msgid "Request"
msgstr "请求"
-#: src/include/iplb/vserver_conf.rb:162
+#: src/include/iplb/vserver_conf.rb:162
msgid "Receive"
msgstr "接收"
-#: src/include/iplb/vserver_conf.rb:165
+#: src/include/iplb/vserver_conf.rb:165
msgid "Virtual Host"
msgstr "虚拟主机"
-#: src/include/iplb/vserver_conf.rb:177
+#: src/include/iplb/vserver_conf.rb:177
msgid "Login"
msgstr "登录"
-#: src/include/iplb/vserver_conf.rb:178
+#: src/include/iplb/vserver_conf.rb:178
msgid "Password"
msgstr "口令"
-#: src/include/iplb/vserver_conf.rb:180
+#: src/include/iplb/vserver_conf.rb:180
msgid "Database Name"
msgstr "数据库名称"
-#: src/include/iplb/vserver_conf.rb:181
+#: src/include/iplb/vserver_conf.rb:181
msgid "Radius Secret"
msgstr "Radius 机密"
-#: src/include/iplb/vserver_conf.rb:199
+#: src/include/iplb/vserver_conf.rb:199
msgid "Persistent"
msgstr "永久"
-#: src/include/iplb/vserver_conf.rb:200
+#: src/include/iplb/vserver_conf.rb:200
msgid "Netmask"
msgstr "网络掩码"
-#: src/include/iplb/vserver_conf.rb:202
+#: src/include/iplb/vserver_conf.rb:202
msgid "Scheduler"
msgstr "调度程序"
-#: src/include/iplb/vserver_conf.rb:211
+#: src/include/iplb/vserver_conf.rb:211
msgid "Protocol"
msgstr "协议"
-#: src/include/iplb/vserver_conf.rb:231
+#: src/include/iplb/vserver_conf.rb:231
msgid "Virtual Servers"
msgstr "虚拟服务器"
-#: src/include/iplb/vserver_conf.rb:234 src/include/iplb/vserver_conf.rb:301
+#: src/include/iplb/vserver_conf.rb:234 src/include/iplb/vserver_conf.rb:301
msgid "Add"
msgstr "添加"
-#: src/include/iplb/vserver_conf.rb:235 src/include/iplb/vserver_conf.rb:303
+#: src/include/iplb/vserver_conf.rb:235 src/include/iplb/vserver_conf.rb:303
msgid "Edit"
msgstr "编辑"
-#: src/include/iplb/vserver_conf.rb:236 src/include/iplb/vserver_conf.rb:302
+#: src/include/iplb/vserver_conf.rb:236 src/include/iplb/vserver_conf.rb:302
msgid "Delete"
msgstr "删除"
-#. disable the delete & edit button if vserver box is empty
-#: src/include/iplb/vserver_conf.rb:296
+#. disable the delete & edit button if vserver box is empty
+#: src/include/iplb/vserver_conf.rb:296
msgid "Virtual Server"
msgstr "虚拟服务器"
-#: src/include/iplb/vserver_conf.rb:298
+#: src/include/iplb/vserver_conf.rb:298
msgid "Real Servers"
msgstr "真实服务器"
-#: src/include/iplb/vserver_conf.rb:310
+#: src/include/iplb/vserver_conf.rb:310
msgid "Check type"
msgstr "检查类型"
-#: src/include/iplb/vserver_conf.rb:311
+#: src/include/iplb/vserver_conf.rb:311
msgid "Auth type"
msgstr "身份验证类型"
-#: src/include/iplb/vserver_conf.rb:312
+#: src/include/iplb/vserver_conf.rb:312
msgid "Others"
msgstr "其他"
-#. return `cacel or a string
-#: src/include/iplb/vserver_conf.rb:342 src/include/iplb/vserver_conf.rb:427
+#. return `cacel or a string
+#: src/include/iplb/vserver_conf.rb:342 src/include/iplb/vserver_conf.rb:427
msgid "OK"
msgstr "确定"
-#: src/include/iplb/vserver_conf.rb:343 src/include/iplb/vserver_conf.rb:428
+#: src/include/iplb/vserver_conf.rb:343 src/include/iplb/vserver_conf.rb:428
msgid "Cancel"
msgstr "取消"
-#. split the real server ip value;
-#: src/include/iplb/vserver_conf.rb:411
+#. split the real server ip value;
+#: src/include/iplb/vserver_conf.rb:411
msgid ""
"If using IPv6,the format should like this\n"
"[fe80::5054:ff:fe00:2]"
@@ -1201,98 +906,98 @@
"如果使用的是 IPv6，格式应该是：\n"
"[fe80::5054:ff:fe00:2]"
-#: src/include/iplb/vserver_conf.rb:413
+#: src/include/iplb/vserver_conf.rb:413
msgid "Real Server's IP Address"
msgstr "真实服务器的 IP 地址"
-#: src/include/iplb/vserver_conf.rb:419
+#: src/include/iplb/vserver_conf.rb:419
msgid "Forward Method"
msgstr "转发方法"
-#: src/include/iplb/vserver_conf.rb:422
+#: src/include/iplb/vserver_conf.rb:422
msgid "weight"
msgstr "权重"
-#. find next ]
-#: src/include/iplb/vserver_conf.rb:456
+#. find next ]
+#: src/include/iplb/vserver_conf.rb:456
msgid "IP address is not Valid"
msgstr "IP 地址无效"
-#. tab switch events end
-#: src/include/iplb/vserver_conf.rb:547
+#. tab switch events end
+#: src/include/iplb/vserver_conf.rb:547
msgid "Add a new real server:"
msgstr "添加新的真实服务器："
-#: src/include/iplb/vserver_conf.rb:564
+#: src/include/iplb/vserver_conf.rb:564
msgid "Edit the real server:"
msgstr "编辑真实服务器："
-#. Initialization dialog contents
-#: src/include/iplb/wizards.rb:142
+#. Initialization dialog contents
+#: src/include/iplb/wizards.rb:142
msgid "Initializing..."
msgstr "正在初始化..."
-#. Read all iplb settings
-#. @return true on success
-#: src/modules/Iplb.rb:214
+#. Read all iplb settings
+#. @return true on success
+#: src/modules/Iplb.rb:214
msgid "Initializing IPLB Configuration"
msgstr "正在初始化 IPLB 配置"
-#. Names of real stages
-#: src/modules/Iplb.rb:221
+#. Names of real stages
+#: src/modules/Iplb.rb:221
msgid "Read the global settings"
msgstr "读取全局设置"
-#: src/modules/Iplb.rb:221
+#: src/modules/Iplb.rb:221
msgid "Read the virtual host settings"
msgstr "读取虚拟主机设置"
-#: src/modules/Iplb.rb:223
+#: src/modules/Iplb.rb:223
msgid "Reading the global settings..."
msgstr "正在读取全局设置..."
-#: src/modules/Iplb.rb:224
+#: src/modules/Iplb.rb:224
msgid "Reading the virtual host settings..."
msgstr "正在读取虚拟主机设置..."
-#: src/modules/Iplb.rb:225 src/modules/Iplb.rb:330
+#: src/modules/Iplb.rb:225 src/modules/Iplb.rb:330
msgid "Finished"
msgstr "已完成"
-#. Write all iplb settings
-#. @return true on success
-#: src/modules/Iplb.rb:320
+#. Write all iplb settings
+#. @return true on success
+#: src/modules/Iplb.rb:320
msgid "Saving IPLB Configuration"
msgstr "正在保存 IPLB 配置"
-#: src/modules/Iplb.rb:326
+#: src/modules/Iplb.rb:326
msgid "Write the settings"
msgstr "写入设置"
-#: src/modules/Iplb.rb:326
+#: src/modules/Iplb.rb:326
msgid "Run SuSEconfig"
msgstr "运行 SuSEconfig"
-#: src/modules/Iplb.rb:328
+#: src/modules/Iplb.rb:328
msgid "Writing the settings..."
msgstr "正在写入设置..."
-#: src/modules/Iplb.rb:329
+#: src/modules/Iplb.rb:329
msgid "Running SuSEconfig..."
msgstr "正在运行SuSEconfig..."
-#. write global conf
-#. check for ipv6 address to decide whether to add "6=" or "="
-#. string key's format
-#. 192.168.6.241:89 or [2001:db8::5]:119
-#. only extract the 2001:db8::5 part from the key string
-#. to check whether it is an ipv6 address;
-#: src/modules/Iplb.rb:355 src/modules/Iplb.rb:392 src/modules/Iplb.rb:405
+#. write global conf
+#. check for ipv6 address to decide whether to add "6=" or "="
+#. string key's format
+#. 192.168.6.241:89 or [2001:db8::5]:119
+#. only extract the 2001:db8::5 part from the key string
+#. to check whether it is an ipv6 address;
+#: src/modules/Iplb.rb:355 src/modules/Iplb.rb:392 src/modules/Iplb.rb:405
msgid "Cannot write settings."
msgstr "无法写入设置。"
-#. TODO FIXME: your code here...
-#. Configuration summary text for autoyast
-#: src/modules/Iplb.rb:441
+#. TODO FIXME: your code here...
+#. Configuration summary text for autoyast
+#: src/modules/Iplb.rb:441
msgid "Configuration summary..."
msgstr "配置摘要..."
Modified: branches/SLE12-SP2/yast/zh_CN/po/iscsi-client.zh_CN.po
===================================================================
--- branches/SLE12-SP2/yast/zh_CN/po/iscsi-client.zh_CN.po 2016-09-15 14:04:11 UTC (rev 96924)
+++ branches/SLE12-SP2/yast/zh_CN/po/iscsi-client.zh_CN.po 2016-09-15 14:54:06 UTC (rev 96925)
@@ -14,226 +14,225 @@
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#. Command line help text for the Xiscsi-client module
-#: src/clients/iscsi-client.rb:56
+#. Command line help text for the Xiscsi-client module
+#: src/clients/iscsi-client.rb:56
msgid "Configuration of an iSCSI initiator"
msgstr "iSCSI 发起端的配置"
-#. progress step title
-#: src/clients/iscsi-client_finish.rb:69
+#. progress step title
+#: src/clients/iscsi-client_finish.rb:69
msgid "Saving iSCSI configuration..."
msgstr "正在保存 iSCSI 配置..."
-#. Rich text title for IscsiClient in proposals
-#: src/clients/iscsi-client_proposal.rb:85
+#. Rich text title for IscsiClient in proposals
+#: src/clients/iscsi-client_proposal.rb:85
msgid "iSCSI Initiator"
msgstr "iSCSI 发起端"
-#. Menu title for IscsiClient in proposals
-#: src/clients/iscsi-client_proposal.rb:89
+#. Menu title for IscsiClient in proposals
+#: src/clients/iscsi-client_proposal.rb:89
msgid "&iSCSI Initiator"
msgstr "iSCSI 发起端(&I)"
-#. radio button (starting SLP service - option 1)
-#: src/include/iscsi-client/dialogs.rb:64
+#. radio button (starting SLP service - option 1)
+#: src/include/iscsi-client/dialogs.rb:64
msgid "When &Booting"
msgstr "引导时(&B)"
-#. radio button (starting SLP service - option 2)
-#: src/include/iscsi-client/dialogs.rb:68
+#. radio button (starting SLP service - option 2)
+#: src/include/iscsi-client/dialogs.rb:68
msgid "&Manually"
msgstr "手动(&M)"
-#. part of help text, used to describe radiobuttons (matching starting SLP service but without "&")
-#: src/include/iscsi-client/dialogs.rb:74
+#. part of help text, used to describe radiobuttons (matching starting SLP service but without "&")
+#: src/include/iscsi-client/dialogs.rb:74
msgid "When Booting"
msgstr "引导时"
-#. part of help text, used to describe radiobuttons (matching starting SLP service but without "&")
-#: src/include/iscsi-client/dialogs.rb:76
+#. part of help text, used to describe radiobuttons (matching starting SLP service but without "&")
+#: src/include/iscsi-client/dialogs.rb:76
msgid "Manually"
msgstr "手动"
-#: src/include/iscsi-client/dialogs.rb:86
+#: src/include/iscsi-client/dialogs.rb:86
msgid "iSNS Address"
msgstr "iSNS 地址"
-#: src/include/iscsi-client/dialogs.rb:87
+#: src/include/iscsi-client/dialogs.rb:87
msgid "iSNS Port"
msgstr "iSNS 端口"
-#. name of iscsi client (/etc/iscsi/initiatorname.iscsi)
-#: src/include/iscsi-client/dialogs.rb:110
+#. name of iscsi client (/etc/iscsi/initiatorname.iscsi)
+#: src/include/iscsi-client/dialogs.rb:110
msgid "&Initiator Name"
msgstr "发起端名称(&I)"
-#. prefer to not translate 'Offload' unless there is a well
-#. known word for this technology (it's special hardware
-#. shifting load from processor to card)
-#: src/include/iscsi-client/dialogs.rb:119
+#. prefer to not translate 'Offload' unless there is a well
+#. known word for this technology (it's special hardware
+#. shifting load from processor to card)
+#: src/include/iscsi-client/dialogs.rb:119
msgid "Offload Car&d"
msgstr "加速卡(&D)"
-#. table of connected targets
-#. table of discovered targets
-#. dialog for all targets from portal (connected/disconnected)
-#: src/include/iscsi-client/dialogs.rb:150
-#: src/include/iscsi-client/dialogs.rb:183
-#: src/include/iscsi-client/dialogs.rb:216
+#. table of connected targets
+#. table of discovered targets
+#. dialog for all targets from portal (connected/disconnected)
+#: src/include/iscsi-client/dialogs.rb:150
+#: src/include/iscsi-client/dialogs.rb:183
+#: src/include/iscsi-client/dialogs.rb:216
msgid "Interface"
msgstr "接口"
-#: src/include/iscsi-client/dialogs.rb:151
-#: src/include/iscsi-client/dialogs.rb:184
-#: src/include/iscsi-client/dialogs.rb:217
+#: src/include/iscsi-client/dialogs.rb:151
+#: src/include/iscsi-client/dialogs.rb:184
+#: src/include/iscsi-client/dialogs.rb:217
msgid "Portal Address"
msgstr "门户网站地址"
-#: src/include/iscsi-client/dialogs.rb:152
-#: src/include/iscsi-client/dialogs.rb:185
-#: src/include/iscsi-client/dialogs.rb:218
+#: src/include/iscsi-client/dialogs.rb:152
+#: src/include/iscsi-client/dialogs.rb:185
+#: src/include/iscsi-client/dialogs.rb:218
msgid "Target Name"
msgstr "目标名称"
-#: src/include/iscsi-client/dialogs.rb:153
-#: src/include/iscsi-client/dialogs.rb:219
+#: src/include/iscsi-client/dialogs.rb:153
+#: src/include/iscsi-client/dialogs.rb:219
msgid "Start-Up"
msgstr "启动"
-#: src/include/iscsi-client/dialogs.rb:159
+#: src/include/iscsi-client/dialogs.rb:159
msgid "Add"
msgstr "添加"
-#: src/include/iscsi-client/dialogs.rb:160
+#: src/include/iscsi-client/dialogs.rb:160
msgid "Edit"
msgstr "编辑"
-#: src/include/iscsi-client/dialogs.rb:161
+#: src/include/iscsi-client/dialogs.rb:161
msgid "Disconnect"
msgstr "断开"
-#: src/include/iscsi-client/dialogs.rb:186
+#: src/include/iscsi-client/dialogs.rb:186
msgid "Connected"
msgstr "已连接"
-#: src/include/iscsi-client/dialogs.rb:192
+#: src/include/iscsi-client/dialogs.rb:192
msgid "Discovery"
msgstr "发现"
-#: src/include/iscsi-client/dialogs.rb:193
-#: src/include/iscsi-client/dialogs.rb:223
+#: src/include/iscsi-client/dialogs.rb:193
+#: src/include/iscsi-client/dialogs.rb:223
msgid "Connect"
msgstr "连接"
-#. authentification dialog for add/discovery target
-#. authentication dialog for add target
-#: src/include/iscsi-client/dialogs.rb:238
-#: src/include/iscsi-client/dialogs.rb:272
+#. authentification dialog for add/discovery target
+#. authentication dialog for add target
+#: src/include/iscsi-client/dialogs.rb:238
+#: src/include/iscsi-client/dialogs.rb:272
msgid "No Authentication"
msgstr "无身份验证"
-#: src/include/iscsi-client/dialogs.rb:241
-#: src/include/iscsi-client/dialogs.rb:275
+#: src/include/iscsi-client/dialogs.rb:241
+#: src/include/iscsi-client/dialogs.rb:275
msgid "Incoming Authentication"
msgstr "传入身份验证"
-#: src/include/iscsi-client/dialogs.rb:243
-#: src/include/iscsi-client/dialogs.rb:249
-#: src/include/iscsi-client/dialogs.rb:277
-#: src/include/iscsi-client/dialogs.rb:283
+#: src/include/iscsi-client/dialogs.rb:243
+#: src/include/iscsi-client/dialogs.rb:249
+#: src/include/iscsi-client/dialogs.rb:277
+#: src/include/iscsi-client/dialogs.rb:283
msgid "Username"
msgstr "用户名"
-#: src/include/iscsi-client/dialogs.rb:244
-#: src/include/iscsi-client/dialogs.rb:250
-#: src/include/iscsi-client/dialogs.rb:278
-#: src/include/iscsi-client/dialogs.rb:284
+#: src/include/iscsi-client/dialogs.rb:244
+#: src/include/iscsi-client/dialogs.rb:250
+#: src/include/iscsi-client/dialogs.rb:278
+#: src/include/iscsi-client/dialogs.rb:284
msgid "Password"
msgstr "口令"
-#: src/include/iscsi-client/dialogs.rb:247
-#: src/include/iscsi-client/dialogs.rb:281
+#: src/include/iscsi-client/dialogs.rb:247
+#: src/include/iscsi-client/dialogs.rb:281
msgid "Outgoing Authentication"
msgstr "传出身份验证"
-#. "handle" : handleDiscAuth,
-#: src/include/iscsi-client/dialogs.rb:301
+#. "handle" : handleDiscAuth,
+#: src/include/iscsi-client/dialogs.rb:301
msgid "Startup"
msgstr "启动"
-#. iSCSI target has to be connected manually
-#: src/include/iscsi-client/dialogs.rb:304
+#. iSCSI target has to be connected manually
+#: src/include/iscsi-client/dialogs.rb:304
msgid "manual"
msgstr "手动"
-#. iSCSI target available at boot (respected by 'dracut')
-#: src/include/iscsi-client/dialogs.rb:306
+#. iSCSI target available at boot (respected by 'dracut')
+#: src/include/iscsi-client/dialogs.rb:306
msgid "onboot"
msgstr "引导时"
-#. iSCSI target enabled automatically (by 'systemd')
-#: src/include/iscsi-client/dialogs.rb:308
+#. iSCSI target enabled automatically (by 'systemd')
+#: src/include/iscsi-client/dialogs.rb:308
msgid "automatic"
msgstr "自动"
-#. widget for portal address
-#: src/include/iscsi-client/dialogs.rb:315
+#. widget for portal address
+#: src/include/iscsi-client/dialogs.rb:315
msgid "IP Address"
msgstr "IP 地址"
-#: src/include/iscsi-client/dialogs.rb:316
+#: src/include/iscsi-client/dialogs.rb:316
msgid "Port"
msgstr "端口"
-#: src/include/iscsi-client/dialogs.rb:331
+#: src/include/iscsi-client/dialogs.rb:331
msgid "Key"
msgstr "密钥"
-#: src/include/iscsi-client/dialogs.rb:331
+#: src/include/iscsi-client/dialogs.rb:331
msgid "Value"
msgstr "值"
-#. service status dialog
-#: src/include/iscsi-client/dialogs.rb:342
+#. service status dialog
+#: src/include/iscsi-client/dialogs.rb:342
msgid "Service"
msgstr "服务"
-#. list og connected targets
-#: src/include/iscsi-client/dialogs.rb:365
+#. list og connected targets
+#: src/include/iscsi-client/dialogs.rb:365
msgid "Connected Targets"
msgstr "已连接目标"
-#. list of discovered targets
-#: src/include/iscsi-client/dialogs.rb:373
+#. list of discovered targets
+#: src/include/iscsi-client/dialogs.rb:373
msgid "Discovered Targets"
msgstr "已发现目标"
-#. main tabbed dialog
-#: src/include/iscsi-client/dialogs.rb:392
+#. main tabbed dialog
+#: src/include/iscsi-client/dialogs.rb:392
msgid "iSCSI Initiator Overview"
msgstr "iSCSI 发起端概述"
-#. discovery new target
-#. dialog for all targets from portal (connected/disconnected)
-#. authentification dialog for add/discovery target
-#: src/include/iscsi-client/dialogs.rb:407
-#: src/include/iscsi-client/helps.rb:110
-#: src/include/iscsi-client/helps.rb:122
-#: src/include/iscsi-client/helps.rb:129
+#. discovery new target
+#. dialog for all targets from portal (connected/disconnected)
+#. authentification dialog for add/discovery target
+#: src/include/iscsi-client/dialogs.rb:407
+#: src/include/iscsi-client/helps.rb:110 src/include/iscsi-client/helps.rb:122
+#: src/include/iscsi-client/helps.rb:129
msgid "<h1>iSCSI Initiator</h1>"
msgstr "<h1>iSCSI 发起端</h1>"
-#. authentication dialog for add new target
-#. list of connected targets
-#. authentication for connect to portal
-#: src/include/iscsi-client/dialogs.rb:442
-#: src/include/iscsi-client/dialogs.rb:481
-#: src/include/iscsi-client/dialogs.rb:507
+#. authentication dialog for add new target
+#. list of connected targets
+#. authentication for connect to portal
+#: src/include/iscsi-client/dialogs.rb:442
+#: src/include/iscsi-client/dialogs.rb:481
+#: src/include/iscsi-client/dialogs.rb:507
msgid "iSCSI Initiator Discovery"
msgstr "iSCSI 发起端发现"
-#. Read dialog help 1/2
-#: src/include/iscsi-client/helps.rb:38
+#. Read dialog help 1/2
+#: src/include/iscsi-client/helps.rb:38
msgid ""
"<p><b><big>Initializing iSCSI Initiator Configuration</big></b><br>\n"
"Please wait...<br></p>\n"
@@ -241,8 +240,8 @@
"<p><b><big>正在初始化 iSCSI 发起端配置</big></b><br>\n"
"请稍候...<br></p>\n"
-#. Read dialog help 2/2
-#: src/include/iscsi-client/helps.rb:42
+#. Read dialog help 2/2
+#: src/include/iscsi-client/helps.rb:42
msgid ""
"<p><b><big>Aborting Initialization</big></b><br>\n"
"Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n"
@@ -250,8 +249,8 @@
"<p><b><big>正在中止初始化</big></b><br>\n"
"可以按<b>中止</b>立即安全地中止配置使用程序。</p>\n"
-#. Write dialog help 1/2
-#: src/include/iscsi-client/helps.rb:46
+#. Write dialog help 1/2
+#: src/include/iscsi-client/helps.rb:46
msgid ""
"<p><b><big>Saving iSCSI Initiator Configuration</big></b><br>\n"
"Please wait...<br></p>\n"
@@ -259,8 +258,8 @@
"<p><b><big>正在保存 iSCSI 发起端配置</big></b><br>\n"
"请稍候...<br></p>\n"
-#. Write dialog help 2/2
-#: src/include/iscsi-client/helps.rb:50
+#. Write dialog help 2/2
+#: src/include/iscsi-client/helps.rb:50
msgid ""
"<p><b><big>Aborting Saving</big></b><br>\n"
"Abort the save procedure by pressing <b>Abort</b>.\n"
@@ -272,8 +271,8 @@
" 另一个对话框将指示这样操作是否安全。\n"
" </p>\n"
-#. Summary dialog help 1/3
-#: src/include/iscsi-client/helps.rb:57
+#. Summary dialog help 1/3
+#: src/include/iscsi-client/helps.rb:57
msgid ""
"<p><b><big>iSCSI Initiator Configuration</big></b><br>\n"
"Configure an iSCSI initiator here.<br></p>\n"
@@ -281,8 +280,8 @@
"<p><b><big>iSCSI 发起端配置</big></b><br>\n"
"在此处配置 iSCSI 发起端。<br></p>\n"
-#. Summary dialog help 2/3
-#: src/include/iscsi-client/helps.rb:61
+#. Summary dialog help 2/3
+#: src/include/iscsi-client/helps.rb:61
msgid ""
"<p><b><big>Adding an iSCSI Initiator</big></b><br>\n"
"Select an iSCSI initiator from the list of detected initiators.\n"
@@ -294,8 +293,8 @@
" 如果没有检测到 iSCSI 发起端，请使用<b>其它(未检测到)</b>。\n"
" 然后按<b>配置</b>。</p>\n"
-#. Summary dialog help 3/3
-#: src/include/iscsi-client/helps.rb:68
+#. Summary dialog help 3/3
+#: src/include/iscsi-client/helps.rb:68
msgid ""
"<p><b><big>Editing or Deleting</big></b><br>\n"
"If you press <b>Edit</b>, an additional dialog in which to change\n"
@@ -305,8 +304,8 @@
"如果按下<b>编辑</b>，则将会打开另外一个对话框，可以在其中更改 \n"
" 配置。</p>\n"
-#. Ovreview dialog help 1/3
-#: src/include/iscsi-client/helps.rb:74
+#. Ovreview dialog help 1/3
+#: src/include/iscsi-client/helps.rb:74
msgid ""
"<p><b><big>iSCSI Initiator Configuration Overview</big></b><br>\n"
"Obtain an overview of installed iSCSI initiators. Additionally\n"
@@ -316,8 +315,8 @@
"获取已安装的 iSCSI 发起端的概述。此外，\n"
"对它们的配置进行编辑。<br></p>\n"
-#. Ovreview dialog help 2/3
-#: src/include/iscsi-client/helps.rb:80
+#. Ovreview dialog help 2/3
+#: src/include/iscsi-client/helps.rb:80
msgid ""
"<p><b><big>Adding an iSCSI Initiator</big></b><br>\n"
"Press <b>Add</b> to configure an iSCSI initiator.</p>\n"
@@ -325,8 +324,8 @@
"<p><b><big>添加 iSCSI 发起端</big></b><br>\n"
"按<b>添加</b>以配置一个 iSCSI 发起端。</p>\n"
-#. Ovreview dialog help 3/3
-#: src/include/iscsi-client/helps.rb:84
+#. Ovreview dialog help 3/3
+#: src/include/iscsi-client/helps.rb:84
msgid ""
"<p><b><big>Editing or Deleting</big></b><br>\n"
"Choose an iSCSI Initiator to change or remove.\n"
@@ -336,194 +335,136 @@
"选择一个要更改或删除的 iSCSI 发起端。\n"
" 然后根据需要按<b>编辑</b>或<b>删除</b>。</p>\n"
-#. table of connected targets
-#: src/include/iscsi-client/helps.rb:90
-msgid ""
-"<p>List of current sessions.</p><p>Use the <b>Add</b> button to get "
-"additional targets. A discovery is started to detect new targets and the "
-"start-up mode of already connected targets keeps unchanged.<br>Use "
-"<b>Disconnect</b> to cancel the connection and with it remove the target "
-"from the list.<br>To change the start-up status, press <b>Edit</b>.</p>"
-msgstr ""
-"<p>当前会话的列表。</p><p>使用<b>添加</b>按钮可获取其他目标。系统会启动发现过"
-"程来检测新目标，已连接目标的启动模式将保持不变。<br>使用<b>断开</b>可以取消连"
-"接，同时会从列表中去除目标。<br>要更改启动状态，请按<b>编辑</b>。</p>"
+#. table of connected targets
+#: src/include/iscsi-client/helps.rb:90
+msgid "<p>List of current sessions.</p><p>Use the <b>Add</b> button to get additional targets. A discovery is started to detect new targets and the start-up mode of already connected targets keeps unchanged.<br>Use <b>Disconnect</b> to cancel the connection and with it remove the target from the list.<br>To change the start-up status, press <b>Edit</b>.</p>"
+msgstr "<p>当前会话的列表。</p><p>使用<b>添加</b>按钮可获取其他目标。系统会启动发现过程来检测新目标，已连接目标的启动模式将保持不变。<br>使用<b>断开</b>可以取消连接，同时会从列表中去除目标。<br>要更改启动状态，请按<b>编辑</b>。</p>"
-#. Warning
-#. Warning
-#: src/include/iscsi-client/helps.rb:99 src/include/iscsi-client/helps.rb:117
+#. Warning
+#. Warning
+#: src/include/iscsi-client/helps.rb:99 src/include/iscsi-client/helps.rb:117
msgid "<h1>Warning</h1>"
msgstr "<h1>警告</h1>"
-#: src/include/iscsi-client/helps.rb:100
-#: src/include/iscsi-client/helps.rb:118
-msgid ""
-"<p>When accessing an iSCSI device <b>READ</b>/<b>WRITE</b>, make sure that "
-"this access is exclusive. Otherwise there is a potential risk of data "
-"corruption.</p>\n"
-msgstr ""
-"<p>当访问 iSCSI 设备 <b>READ</b>/<b>WRITE</b> 时，确保此访问是排它的。否则会"
-"有潜在的数据损坏风险。</p>\n"
+#: src/include/iscsi-client/helps.rb:100 src/include/iscsi-client/helps.rb:118
+msgid "<p>When accessing an iSCSI device <b>READ</b>/<b>WRITE</b>, make sure that this access is exclusive. Otherwise there is a potential risk of data corruption.</p>\n"
+msgstr "<p>当访问 iSCSI 设备 <b>READ</b>/<b>WRITE</b> 时，确保此访问是排它的。否则会有潜在的数据损坏风险。</p>\n"
-#: src/include/iscsi-client/helps.rb:103
+#: src/include/iscsi-client/helps.rb:103
msgid ""
-"<p><b>Initiator Name</b> is a value from <tt>/etc/iscsi/initiatorname.iscsi. \n"
-"In case you have iBFT, this value will be added from there and you are only "
-"able to change it in the BIOS setup.</p>"
+"<p><b>Initiator Name</b> is a value from <tt>/etc/iscsi/initiatorname.iscsi</tt>. \n"
+"In case you have iBFT, this value will be added from there and you are only able to change it in the BIOS setup.</p>"
msgstr ""
"<p><b>发起端名称</b>是 <tt>/etc/iscsi/initiatorname.iscsi</tt> 中的一个值。\n"
-"如果您使用 iBFT，此处添加的将是 iBFT 中的值，并且您只能在 BIOS 设置中更改它。"
-"</p>"
+"如果您使用 iBFT，此处添加的将是 iBFT 中的值，并且您只能在 BIOS 设置中更改它。</p>"
-#: src/include/iscsi-client/helps.rb:106
+#: src/include/iscsi-client/helps.rb:106
msgid ""
-"If you want to use <b>iSNS</b> (Internet Storage Name Service) for "
-"discovering targets instead of the default SendTargets method,\n"
-"fill in the IP address of the iSNS server and port. The default port should "
-"be 3205.\n"
+"If you want to use <b>iSNS</b> (Internet Storage Name Service) for discovering targets instead of the default SendTargets method,\n"
+"fill in the IP address of the iSNS server and port. The default port should be 3205.\n"
msgstr ""
-"如果要使用 <b>iSNS</b> (Internet Storage Name Service) 来发现目标，而不使用默"
-"认的 SendTargets 方法，\n"
+"如果要使用 <b>iSNS</b> (Internet Storage Name Service) 来发现目标，而不使用默认的 SendTargets 方法，\n"
"请填写 iSNS 服务器的 IP 地址和端口。默认端口是 3205。\n"
-#: src/include/iscsi-client/helps.rb:111
+#: src/include/iscsi-client/helps.rb:111
msgid ""
"Enter the <b>IP Address</b> of the iSCSI target server.\n"
-"Only change <b>Port</b> if needed. For authentication, use <b>Username</b> "
-"and <b>Password</b>. If you do not need authentication,\n"
+"Only change <b>Port</b> if needed. For authentication, use <b>Username</b> and <b>Password</b>. If you do not need authentication,\n"
"select <b>No Authentication</b>.\n"
msgstr ""
"输入 iSCSI 目标服务器的 <b>IP 地址</b>。\n"
-"请仅在需要时更改<b>端口</b>。对于身份验证，请使用<b>用户名</b>和<b>口令</b>。"
-"如果不需要身份验证，\n"
+"请仅在需要时更改<b>端口</b>。对于身份验证，请使用<b>用户名</b>和<b>口令</b>。如果不需要身份验证，\n"
"请选择<b>无身份验证</b>。\n"
-#: src/include/iscsi-client/helps.rb:125
-msgid ""
-"List of nodes offered by the iSCSI target. Select one item and click "
-"<b>Connect</b>. "
+#: src/include/iscsi-client/helps.rb:125
+msgid "List of nodes offered by the iSCSI target. Select one item and click <b>Connect</b>. "
msgstr "iSCSI 目标提供的节点的列表。选择一项，然后单击<b>连接</b>。"
-#: src/include/iscsi-client/helps.rb:132
+#: src/include/iscsi-client/helps.rb:132
msgid "<h1>Startup</h1>"
msgstr "<h1>启动</h1>"
-#: src/include/iscsi-client/helps.rb:133
+#: src/include/iscsi-client/helps.rb:133
msgid ""
"<p><b>manual</b> is for iSCSI targets which are not to be connected by\n"
"default, the user needs to connect them manually</p>\n"
-"<p><b>onboot</b> is for iSCSI targets to be connected during boot, i.e. "
-"when\n"
+"<p><b>onboot</b> is for iSCSI targets to be connected during boot, i.e. when\n"
"root is on iSCSI. As such it will be evaluated by the initrd.</p>\n"
-"<p><b>automatic</b> is for iSCSI targets to be connected when the iSCSI "
-"service\n"
+"<p><b>automatic</b> is for iSCSI targets to be connected when the iSCSI service\n"
"starts up.</p>\n"
msgstr ""
"<p><b>手动</b>用于默认不连接的 iSCSI 目标，用户需要手动连接它们</p>\n"
-"<p><b>引导时</b>用于在引导时连接的 iSCSI 目标，例如，当根分区在 iSCSI 上"
-"时。\n"
+"<p><b>引导时</b>用于在引导时连接的 iSCSI 目标，例如，当根分区在 iSCSI 上时。\n"
"因为这样 initrd 就需要评估位于 iSCSI 上的根分区了。</p>\n"
"<p><b>自动</b>用于当 iSCSI 服务启动时自动连接的 iSCSI 目标。</p>\n"
-#: src/include/iscsi-client/helps.rb:141
+#: src/include/iscsi-client/helps.rb:141
msgid "<h1>Authentication</h1>"
msgstr "<h1>身份验证</h1>"
-#: src/include/iscsi-client/helps.rb:142
-msgid ""
-"<p>The default setting here is <i>No Authentication</i>. Uncheck the "
-"checkbox if authentication is needed for security reasons. Enter "
-"<b>Username</b> and <b>Password</b> for 'Incoming Authentication', 'Outgoing "
-"Authentication' or for both.</p><p><b>Please note:</b><br>'Incoming "
-"Authentication' here correlates to 'Outgoing Authentication' on iSCSI target "
-"server side and the other way round.</p>"
-msgstr ""
-"<p>此处的默认设置为<i>无身份验证</i>。如果出于安全原因而需要身份验证，请取消"
-"选中该复选框。请针对“传入身份验证”和/或“传出身份验证”输入<b>用户名</b>和<b>口"
-"令</b>。</p><p><b>请注意：</b><br>此处的“传入身份验证”与 iSCSI 目标服务器端"
-"的“传出身份验证”相关联，反之亦然。</p>"
+#: src/include/iscsi-client/helps.rb:142
+msgid "<p>The default setting here is <i>No Authentication</i>. Uncheck the checkbox if authentication is needed for security reasons. Enter <b>Username</b> and <b>Password</b> for 'Incoming Authentication', 'Outgoing Authentication' or for both.</p><p><b>Please note:</b><br>'Incoming Authentication' here correlates to 'Outgoing Authentication' on iSCSI target server side and the other way round.</p>"
+msgstr "<p>此处的默认设置为<i>无身份验证</i>。如果出于安全原因而需要身份验证，请取消选中该复选框。请针对“传入身份验证”和/或“传出身份验证”输入<b>用户名</b>和<b>口令</b>。</p><p><b>请注意：</b><br>此处的“传入身份验证”与 iSCSI 目标服务器端的“传出身份验证”相关联，反之亦然。</p>"
-#. list of discovered targets
-#: src/include/iscsi-client/helps.rb:151
-msgid ""
-"<p>This screen shows the list of discovered targets.</p><p>Use the "
-"<b>Discovery</b> button to get available iSCSI targets from a server "
-"specified by IP address.<br><b>Connect</b> to a target to establih the "
-"connection. If login was successful the column <i>Connected</i> shows status "
-"'True' and the target will appear on the <i>Connected Targets</i> screen."
-"<br>To remove a target use the <b>Delete</b> button.<br> <b>Hint:</b> "
-"Removing of targets is only possible for not connected onces. If required, "
-"<b>Disconnect</b> at <i>Connected Targets</i> first.</p><p><b>Please note: Starting the <b>Discovery</b> again means doing a re-discovery of targets "
-"which possibly will change the start-up mode of already connected targets "
-"(to default 'manual'). Switch to <i>Connected Targets</i> screen and use the "
-"<b>Add</b> button if you want to add new targets without changing the start-"
-"up mode.</p>"
-msgstr ""
-"<p>此屏幕显示已发现目标的列表。</p><p>使用<b>发现</b>按钮可获取从 IP 地址所指"
-"定的服务器上可用的 iSCSI 目标。<br>对某个目标使用<b>连接</b>可建立连接。如果"
-"登录成功，列<i>已连接</i>将显示状态“True”，并且目标会出现在<i>已连接目标</i>"
-"屏幕上。<br>要去除某个目标，请使用<b>删除</b>按钮。<br> <b>提示：</b>只能去除"
-"未连接的目标。如果需要，请先在<i>已连接目标</i>屏幕上使用<b>断开</b>。<p><b>请注意：</b>再次启动<b>发现</b>会对目标重新执行发现过程，而这可能会更"
-"改现已连接的目标的启动模式（更改为默认模式“手动”）。如果您想添加新目标而不更"
-"改启动模式，请切换到<i>已连接目标</i>屏幕并使用<b>添加</b>按钮。</p>"
+#. list of discovered targets
+#: src/include/iscsi-client/helps.rb:151
+msgid "<p>This screen shows the list of discovered targets.</p><p>Use the <b>Discovery</b> button to get available iSCSI targets from a server specified by IP address.<br><b>Connect</b> to a target to establih the connection. If login was successful the column <i>Connected</i> shows status 'True' and the target will appear on the <i>Connected Targets</i> screen.<br>To remove a target use the <b>Delete</b> button.<br> <b>Hint:</b> Removing of targets is only possible for not connected onces. If required, <b>Disconnect</b> at <i>Connected Targets</i> first.</p><p><b>Please note:</b> Starting the <b>Discovery</b> again means doing a re-discovery of targets which possibly will change the start-up mode of already connected targets (to default 'manual'). Switch to <i>Connected Targets</i> screen and use the <b>Add</b> button if you want to add new targets without changing the start-up mode.</p>"
+msgstr "<p>此屏幕显示已发现目标的列表。</p><p>使用<b>发现</b>按钮可获取从 IP 地址所指定的服务器上可用的 iSCSI 目标。<br>对某个目标使用<b>连接</b>可建立连接。如果登录成功，列<i>已连接</i>将显示状态“True”，并且目标会出现在<i>已连接目标</i>屏幕上。<br>要去除某个目标，请使用<b>删除</b>按钮。<br> <b>提示：</b>只能去除未连接的目标。如果需要，请先在<i>已连接目标</i>屏幕上使用<b>断开</b>。</p><p><b>请注意：</b>再次启动<b>发现</b>会对目标重新执行发现过程，而这可能会更改现已连接的目标的启动模式（更改为默认模式“手动”）。如果您想添加新目标而不更改启动模式，请切换到<i>已连接目标</i>屏幕并使用<b>添加</b>按钮。</p>"
-#: src/include/iscsi-client/helps.rb:167
+#: src/include/iscsi-client/helps.rb:167
msgid "<h1>iBTF</h1>"
msgstr "<h1>iBTF</h1>"
-#. string initiatorname="";
-#. function for run command in background
-#: src/include/iscsi-client/widgets.rb:65
+#. string initiatorname="";
+#. function for run command in background
+#: src/include/iscsi-client/widgets.rb:65
msgid "Command timed out"
msgstr "命令已超时"
-#. validation for authentication dialog entry
-#: src/include/iscsi-client/widgets.rb:123
-#: src/include/iscsi-client/widgets.rb:135
+#. validation for authentication dialog entry
+#: src/include/iscsi-client/widgets.rb:123
+#: src/include/iscsi-client/widgets.rb:135
msgid "Insert the username."
msgstr "插入用户名。"
-#: src/include/iscsi-client/widgets.rb:128
-#: src/include/iscsi-client/widgets.rb:140
+#: src/include/iscsi-client/widgets.rb:128
+#: src/include/iscsi-client/widgets.rb:140
msgid "Insert the password."
msgstr "插入口令。"
-#. init table of connected sessions
-#: src/include/iscsi-client/widgets.rb:152
+#. init table of connected sessions
+#: src/include/iscsi-client/widgets.rb:152
msgid "Error While Connecting iscsid"
msgstr "连接 iscsid 时出错"
-#. delete (logout from) connected target
-#: src/include/iscsi-client/widgets.rb:214
+#. delete (logout from) connected target
+#: src/include/iscsi-client/widgets.rb:214
msgid "Really log out from the selected target?"
msgstr "确实要从所选目标注销吗？"
-#: src/include/iscsi-client/widgets.rb:218
+#: src/include/iscsi-client/widgets.rb:218
msgid "Error occurred while logging out from the selected target."
msgstr "从所选目标注销时出错。"
-#: src/include/iscsi-client/widgets.rb:228
+#: src/include/iscsi-client/widgets.rb:228
msgid "No record found."
msgstr "找不到记录"
-#. if nothing selected - disable some buttons, otherwise enable them
-#: src/include/iscsi-client/widgets.rb:270
+#. if nothing selected - disable some buttons, otherwise enable them
+#: src/include/iscsi-client/widgets.rb:270
msgid "No valid IP address"
msgstr "没有有效的 IP 地址"
-#: src/include/iscsi-client/widgets.rb:275
+#: src/include/iscsi-client/widgets.rb:275
msgid "Port field cannot be empty"
msgstr "端口字段不能为空"
-#. regexp for "cz.suse" or just "suse", "cz.su-se"
-#: src/include/iscsi-client/widgets.rb:393
+#. regexp for "cz.suse" or just "suse", "cz.su-se"
+#: src/include/iscsi-client/widgets.rb:393
msgid "Incorrect Initiator Name"
msgstr "错误的发起端名称"
-#: src/include/iscsi-client/widgets.rb:394
+#: src/include/iscsi-client/widgets.rb:394
msgid ""
"\n"
"The correct syntax is\n"
@@ -545,149 +486,144 @@
"\n"
"要使用该名称吗？\n"
-#. validate ip
-#: src/include/iscsi-client/widgets.rb:572
+#. validate ip
+#: src/include/iscsi-client/widgets.rb:572
msgid "Insert the IP address."
msgstr "插入 IP 地址。"
-#. check for valid host name
-#: src/include/iscsi-client/widgets.rb:584
+#. check for valid host name
+#: src/include/iscsi-client/widgets.rb:584
msgid "Please check IP address resp. host name.\n"
msgstr "请检查对应主机名的 IP 地址。\n"
-#. validate port number
-#: src/include/iscsi-client/widgets.rb:596
+#. validate port number
+#: src/include/iscsi-client/widgets.rb:596
msgid "Insert the port."
msgstr "插入端口。"
-#. string record = deletechars(row_in_string[0]:"", "[]");
-#. ******************* target table *************************
-#. initialize dialog for all targets from portal (connected/disconnected)
-#. enable/disable connect button according target is or not already connected
-#: src/include/iscsi-client/widgets.rb:717
-#: src/include/iscsi-client/widgets.rb:822
-#: src/include/iscsi-client/widgets.rb:850
+#. string record = deletechars(row_in_string[0]:"", "[]");
+#. ******************* target table *************************
+#. initialize dialog for all targets from portal (connected/disconnected)
+#. enable/disable connect button according target is or not already connected
+#: src/include/iscsi-client/widgets.rb:717
+#: src/include/iscsi-client/widgets.rb:822
+#: src/include/iscsi-client/widgets.rb:850
msgid "True"
msgstr "True"
-#: src/include/iscsi-client/widgets.rb:717
-#: src/include/iscsi-client/widgets.rb:822
+#: src/include/iscsi-client/widgets.rb:717
+#: src/include/iscsi-client/widgets.rb:822
msgid "False"
msgstr "False"
-#. check if not already connected
-#. check if not already connected
-#: src/include/iscsi-client/widgets.rb:755
-#: src/include/iscsi-client/widgets.rb:875
-msgid ""
-"The target with this TargetName is already connected. Make sure that "
-"multipathing is enabled to prevent data corruption."
-msgstr ""
-"已连接名称为此 TargetName 的目标。 请确保启用了 Multipathing 以防止数据损坏。"
+#. check if not already connected
+#. check if not already connected
+#: src/include/iscsi-client/widgets.rb:755
+#: src/include/iscsi-client/widgets.rb:875
+msgid "The target with this TargetName is already connected. Make sure that multipathing is enabled to prevent data corruption."
+msgstr "已连接名称为此 TargetName 的目标。 请确保启用了 Multipathing 以防止数据损坏。"
-#: src/include/iscsi-client/widgets.rb:758
-#: src/include/iscsi-client/widgets.rb:878
+#: src/include/iscsi-client/widgets.rb:758
+#: src/include/iscsi-client/widgets.rb:878
msgid "Continue"
msgstr "继续"
-#: src/include/iscsi-client/widgets.rb:759
-#: src/include/iscsi-client/widgets.rb:879
+#: src/include/iscsi-client/widgets.rb:759
+#: src/include/iscsi-client/widgets.rb:879
msgid "Cancel"
msgstr "取消"
-#. check if is not already connected
-#: src/include/iscsi-client/widgets.rb:869
+#. check if is not already connected
+#: src/include/iscsi-client/widgets.rb:869
msgid "The target is already connected."
msgstr "目标已连接。"
-#. Initialization dialog caption
-#: src/include/iscsi-client/wizards.rb:121
+#. Initialization dialog caption
+#: src/include/iscsi-client/wizards.rb:121
msgid "iSCSI Initiator Configuration"
msgstr "iSCSI 发起端配置"
-#. Initialization dialog contents
-#: src/include/iscsi-client/wizards.rb:123
+#. Initialization dialog contents
+#: src/include/iscsi-client/wizards.rb:123
msgid "Initializing..."
msgstr "正在初始化..."
-#. don't check interactively for packages (bnc#367300)
-#. skip it during second stage or when create AY profile
-#: src/modules/IscsiClient.rb:96
-msgid ""
-"<p>To configure the iSCSI initiator, the <b>%1</b> package must be installed."
-"</p>"
+#. don't check interactively for packages (bnc#367300)
+#. skip it during second stage or when create AY profile
+#: src/modules/IscsiClient.rb:96
+msgid "<p>To configure the iSCSI initiator, the <b>%1</b> package must be installed.</p>"
msgstr "<p>要配置 iSCSI 发起端，必须安装 <b>%1</b> 包。</p>"
-#: src/modules/IscsiClient.rb:99
+#: src/modules/IscsiClient.rb:99
msgid "<p>Install it now?</p>"
msgstr "<p>是否立即安装？</p>"
-#. IscsiClient read dialog caption
-#: src/modules/IscsiClient.rb:152
+#. IscsiClient read dialog caption
+#: src/modules/IscsiClient.rb:152
msgid "Initializing iSCSI Initiator Configuration"
msgstr "正在初始化 iSCSI 发起端配置"
-#. Progress stage 1/3
-#: src/modules/IscsiClient.rb:168
+#. Progress stage 1/3
+#: src/modules/IscsiClient.rb:168
msgid "Read the database"
msgstr "读取数据库"
-#. Progress stage 2/3
-#: src/modules/IscsiClient.rb:170
+#. Progress stage 2/3
+#: src/modules/IscsiClient.rb:170
msgid "Read the previous settings"
msgstr "读取以前的设置"
-#. Progress stage 3/3
-#: src/modules/IscsiClient.rb:172
+#. Progress stage 3/3
+#: src/modules/IscsiClient.rb:172
msgid "Detect the devices"
msgstr "检测设备"
-#. Progress step 1/3
-#: src/modules/IscsiClient.rb:176
+#. Progress step 1/3
+#: src/modules/IscsiClient.rb:176
msgid "Reading the database..."
msgstr "正在读取数据库..."
-#. Progress step 2/3
-#: src/modules/IscsiClient.rb:178
+#. Progress step 2/3
+#: src/modules/IscsiClient.rb:178
msgid "Reading the previous settings..."
msgstr "正在读取以前的设置..."
-#. Progress step 3/3
-#: src/modules/IscsiClient.rb:180
+#. Progress step 3/3
+#: src/modules/IscsiClient.rb:180
msgid "Detecting the devices..."
msgstr "正在检测设备..."
-#. Progress finished
-#: src/modules/IscsiClient.rb:182
+#. Progress finished
+#: src/modules/IscsiClient.rb:182
msgid "Finished"
msgstr "已完成"
-#. IscsiClient read dialog caption
-#: src/modules/IscsiClient.rb:237
+#. IscsiClient read dialog caption
+#: src/modules/IscsiClient.rb:237
msgid "Saving iSCSI Initiator Configuration"
msgstr "正在保存 iSCSI 发起端配置"
-#. Progress stage 1/2
-#: src/modules/IscsiClient.rb:246
+#. Progress stage 1/2
+#: src/modules/IscsiClient.rb:246
msgid "Write AutoYaST settings"
msgstr "写入 AutoYaST 设置"
-#. Progress stage 2/2
-#: src/modules/IscsiClient.rb:248
+#. Progress stage 2/2
+#: src/modules/IscsiClient.rb:248
msgid "Set up service status"
msgstr "设置服务状态"
-#. interface type for hardware offloading
-#: src/modules/IscsiClientLib.rb:72
+#. interface type for hardware offloading
+#: src/modules/IscsiClientLib.rb:72
msgid "default (Software)"
msgstr "默认（软件）"
-#: src/modules/IscsiClientLib.rb:73
+#: src/modules/IscsiClientLib.rb:73
msgid "all"
msgstr "所有"
-#. }
-#: src/modules/IscsiClientLib.rb:730
+#. }
+#: src/modules/IscsiClientLib.rb:730
msgid ""
"InitiatorName from iBFT and from <tt>/etc/iscsi/initiatorname.iscsi</tt>\n"
"differ. The old initiator name will be replaced by the value of iBFT and a \n"
@@ -699,13 +635,13 @@
"并且系统会创建一个备份。您如果想要使用不同的\n"
"发起端名称，请在 BIOS 中更改它。\n"
-#. Report a warning (not an error) if login failed for other reasons
-#. (also related to bsc#981693, warning popups usually are skipped)
-#: src/modules/IscsiClientLib.rb:1070
+#. Report a warning (not an error) if login failed for other reasons
+#. (also related to bsc#981693, warning popups usually are skipped)
+#: src/modules/IscsiClientLib.rb:1070
msgid "Target connection failed.\n"
msgstr "目标连接失败。\n"
-#. do discovery first
-#: src/modules/IscsiClientLib.rb:1208
+#. do discovery first
+#: src/modules/IscsiClientLib.rb:1208
msgid "Configuration summary..."
msgstr "配置摘要..."
Modified: branches/SLE12-SP2/yast/zh_CN/po/iscsi-lio-server.zh_CN.po
===================================================================
--- branches/SLE12-SP2/yast/zh_CN/po/iscsi-lio-server.zh_CN.po 2016-09-15 14:04:11 UTC (rev 96924)
+++ branches/SLE12-SP2/yast/zh_CN/po/iscsi-lio-server.zh_CN.po 2016-09-15 14:54:06 UTC (rev 96925)
@@ -14,244 +14,244 @@
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#. Command line help text for the iscsi-lio-server module
-#: src/clients/iscsi-lio-server.rb:56
+#. Command line help text for the iscsi-lio-server module
+#: src/clients/iscsi-lio-server.rb:56
msgid "Configuration of an iSCSI target via LIO"
msgstr "通过 LIO 配置 iSCSI 目标"
-#. Rich text title for IscsiLioServer in proposals
-#: src/clients/iscsi-lio-server_proposal.rb:85
+#. Rich text title for IscsiLioServer in proposals
+#: src/clients/iscsi-lio-server_proposal.rb:85
msgid "iSCSI LIO Target"
msgstr "iSCSI LIO 目标"
-#. Menu title for IscsiLioServer in proposals
-#: src/clients/iscsi-lio-server_proposal.rb:89
+#. Menu title for IscsiLioServer in proposals
+#: src/clients/iscsi-lio-server_proposal.rb:89
msgid "&iSCSI LIO Target"
msgstr "iSCSI LIO 目标(&I)"
-#. first tab - service status and firewall
-#: src/include/iscsi-lio-server/dialogs.rb:57
+#. first tab - service status and firewall
+#: src/include/iscsi-lio-server/dialogs.rb:57
msgid "Service"
msgstr "服务"
-#. second tab - global authentication
+#. second tab - global authentication
#: src/include/iscsi-lio-server/dialogs.rb:73
-#: src/modules/IscsiLioServer.rb:427
+#: src/modules/IscsiLioServer.rb:427
msgid "Global"
msgstr "全局"
-#. third tab - targets / luns
-#. targets dialog
-#: src/include/iscsi-lio-server/dialogs.rb:89
-#: src/include/iscsi-lio-server/dialogs.rb:321
-#: src/modules/IscsiLioServer.rb:443
+#. third tab - targets / luns
+#. targets dialog
+#: src/include/iscsi-lio-server/dialogs.rb:89
+#: src/include/iscsi-lio-server/dialogs.rb:321
+#: src/modules/IscsiLioServer.rb:443
msgid "Targets"
msgstr "目标"
-#: src/include/iscsi-lio-server/dialogs.rb:115
-#: src/include/iscsi-lio-server/dialogs.rb:176
+#: src/include/iscsi-lio-server/dialogs.rb:115
+#: src/include/iscsi-lio-server/dialogs.rb:176
msgid "Target"
msgstr "目标"
-#: src/include/iscsi-lio-server/dialogs.rb:124
-#: src/include/iscsi-lio-server/dialogs.rb:185
+#: src/include/iscsi-lio-server/dialogs.rb:124
+#: src/include/iscsi-lio-server/dialogs.rb:185
msgid "Identifier"
msgstr "标识符"
-#: src/include/iscsi-lio-server/dialogs.rb:128
-#: src/include/iscsi-lio-server/dialogs.rb:189
-#: src/include/iscsi-lio-server/dialogs.rb:321
+#: src/include/iscsi-lio-server/dialogs.rb:128
+#: src/include/iscsi-lio-server/dialogs.rb:189
+#: src/include/iscsi-lio-server/dialogs.rb:321
msgid "Portal group"
msgstr "门户组"
-#: src/include/iscsi-lio-server/dialogs.rb:136
+#: src/include/iscsi-lio-server/dialogs.rb:136
msgid "Ip address"
msgstr "IP 地址"
-#: src/include/iscsi-lio-server/dialogs.rb:140
+#: src/include/iscsi-lio-server/dialogs.rb:140
msgid "Port number"
msgstr "端口号"
-#: src/include/iscsi-lio-server/dialogs.rb:143
+#: src/include/iscsi-lio-server/dialogs.rb:143
msgid "Bind all IP addresses"
msgstr "绑定所有 IP 地址"
-#: src/include/iscsi-lio-server/dialogs.rb:145
+#: src/include/iscsi-lio-server/dialogs.rb:145
msgid "Use Authentication"
msgstr "使用身份验证"
-#: src/include/iscsi-lio-server/dialogs.rb:149
-#: src/include/iscsi-lio-server/widgets.rb:312
+#: src/include/iscsi-lio-server/dialogs.rb:149
+#: src/include/iscsi-lio-server/widgets.rb:312
msgid "LUN"
msgstr "LUN"
-#: src/include/iscsi-lio-server/dialogs.rb:149
+#: src/include/iscsi-lio-server/dialogs.rb:149
msgid "Name"
msgstr "名称"
-#: src/include/iscsi-lio-server/dialogs.rb:149
+#: src/include/iscsi-lio-server/dialogs.rb:149
msgid "Path"
msgstr "路径"
-#: src/include/iscsi-lio-server/dialogs.rb:154
-#: src/include/iscsi-lio-server/dialogs.rb:199
-#: src/include/iscsi-lio-server/dialogs.rb:238
-#: src/include/iscsi-lio-server/dialogs.rb:326
-#: src/include/iscsi-lio-server/dialogs.rb:373
-#: src/include/iscsi-lio-server/widgets.rb:453
+#: src/include/iscsi-lio-server/dialogs.rb:154
+#: src/include/iscsi-lio-server/dialogs.rb:199
+#: src/include/iscsi-lio-server/dialogs.rb:238
+#: src/include/iscsi-lio-server/dialogs.rb:326
+#: src/include/iscsi-lio-server/dialogs.rb:373
+#: src/include/iscsi-lio-server/widgets.rb:453
msgid "Add"
msgstr "添加"
-#: src/include/iscsi-lio-server/dialogs.rb:155
-#: src/include/iscsi-lio-server/dialogs.rb:239
-#: src/include/iscsi-lio-server/dialogs.rb:327
-#: src/include/iscsi-lio-server/dialogs.rb:374
+#: src/include/iscsi-lio-server/dialogs.rb:155
+#: src/include/iscsi-lio-server/dialogs.rb:239
+#: src/include/iscsi-lio-server/dialogs.rb:327
+#: src/include/iscsi-lio-server/dialogs.rb:374
msgid "Edit"
msgstr "编辑"
-#: src/include/iscsi-lio-server/dialogs.rb:156
-#: src/include/iscsi-lio-server/dialogs.rb:202
-#: src/include/iscsi-lio-server/dialogs.rb:240
-#: src/include/iscsi-lio-server/dialogs.rb:328
-#: src/include/iscsi-lio-server/dialogs.rb:375
-#: src/include/iscsi-lio-server/widgets.rb:454
+#: src/include/iscsi-lio-server/dialogs.rb:156
+#: src/include/iscsi-lio-server/dialogs.rb:202
+#: src/include/iscsi-lio-server/dialogs.rb:240
+#: src/include/iscsi-lio-server/dialogs.rb:328
+#: src/include/iscsi-lio-server/dialogs.rb:375
+#: src/include/iscsi-lio-server/widgets.rb:454
msgid "Delete"
msgstr "删除"
-#. table header (Initiator: iSCSI client, LUN Mapping: logical unit client/target mapping, Auth: authorization)
-#: src/include/iscsi-lio-server/dialogs.rb:194
+#. table header (Initiator: iSCSI client, LUN Mapping: logical unit client/target mapping, Auth: authorization)
+#: src/include/iscsi-lio-server/dialogs.rb:194
msgid "Initiator"
msgstr "发起端"
-#: src/include/iscsi-lio-server/dialogs.rb:194
+#: src/include/iscsi-lio-server/dialogs.rb:194
msgid "LUN Mapping"
msgstr "LUN 映射"
-#: src/include/iscsi-lio-server/dialogs.rb:194
+#: src/include/iscsi-lio-server/dialogs.rb:194
msgid "Auth"
msgstr "身份验证"
-#: src/include/iscsi-lio-server/dialogs.rb:200
+#: src/include/iscsi-lio-server/dialogs.rb:200
msgid "Edit LUN"
msgstr "编辑 LUN"
-#: src/include/iscsi-lio-server/dialogs.rb:201
+#: src/include/iscsi-lio-server/dialogs.rb:201
msgid "Edit Auth"
msgstr "编辑身份验证"
-#: src/include/iscsi-lio-server/dialogs.rb:203
+#: src/include/iscsi-lio-server/dialogs.rb:203
msgid "Copy"
msgstr "复制"
-#. enable/disable none/incoming/outgoing authentication
-#: src/include/iscsi-lio-server/dialogs.rb:217
-#: src/include/iscsi-lio-server/widgets.rb:218
-#: src/modules/IscsiLioServer.rb:434
+#. enable/disable none/incoming/outgoing authentication
+#: src/include/iscsi-lio-server/dialogs.rb:217
+#: src/include/iscsi-lio-server/widgets.rb:218
+#: src/modules/IscsiLioServer.rb:434
msgid "No Authentication"
msgstr "无身份验证"
-#: src/include/iscsi-lio-server/dialogs.rb:226
-#: src/include/iscsi-lio-server/widgets.rb:229
-#: src/modules/IscsiLioServer.rb:437
+#: src/include/iscsi-lio-server/dialogs.rb:226
+#: src/include/iscsi-lio-server/widgets.rb:229
+#: src/modules/IscsiLioServer.rb:437
msgid "Incoming Authentication"
msgstr "传入身份验证"
-#. dialog to add/modify user and password
-#: src/include/iscsi-lio-server/dialogs.rb:233
-#: src/include/iscsi-lio-server/dialogs.rb:254
-#: src/include/iscsi-lio-server/widgets.rb:234
-#: src/include/iscsi-lio-server/widgets.rb:247
-#: src/include/iscsi-lio-server/widgets.rb:732
+#. dialog to add/modify user and password
+#: src/include/iscsi-lio-server/dialogs.rb:233
+#: src/include/iscsi-lio-server/dialogs.rb:254
+#: src/include/iscsi-lio-server/widgets.rb:234
+#: src/include/iscsi-lio-server/widgets.rb:247
+#: src/include/iscsi-lio-server/widgets.rb:732
msgid "Username"
msgstr "用户名"
-#: src/include/iscsi-lio-server/dialogs.rb:233
-#: src/include/iscsi-lio-server/dialogs.rb:255
-#: src/include/iscsi-lio-server/widgets.rb:235
-#: src/include/iscsi-lio-server/widgets.rb:248
-#: src/include/iscsi-lio-server/widgets.rb:733
+#: src/include/iscsi-lio-server/dialogs.rb:233
+#: src/include/iscsi-lio-server/dialogs.rb:255
+#: src/include/iscsi-lio-server/widgets.rb:235
+#: src/include/iscsi-lio-server/widgets.rb:248
+#: src/include/iscsi-lio-server/widgets.rb:733
msgid "Password"
msgstr "口令"
-#: src/include/iscsi-lio-server/dialogs.rb:249
-#: src/include/iscsi-lio-server/widgets.rb:242
-#: src/modules/IscsiLioServer.rb:440
+#: src/include/iscsi-lio-server/dialogs.rb:249
+#: src/include/iscsi-lio-server/widgets.rb:242
+#: src/modules/IscsiLioServer.rb:440
msgid "Outgoing Authentication"
msgstr "传出身份验证"
-#. radio button (starting LIO target service - option 1)
-#: src/include/iscsi-lio-server/dialogs.rb:275
+#. radio button (starting LIO target service - option 1)
+#: src/include/iscsi-lio-server/dialogs.rb:275
msgid "When &Booting"
msgstr "引导时(&B)"
-#. radio button (starting LIO target service - option 2)
-#: src/include/iscsi-lio-server/dialogs.rb:279
+#. radio button (starting LIO target service - option 2)
+#: src/include/iscsi-lio-server/dialogs.rb:279
msgid "&Manually"
msgstr "手动(&M)"
-#. part of help text, used to describe radiobuttons (matching starting LIO target service but without "&")
-#: src/include/iscsi-lio-server/dialogs.rb:285
-#: src/modules/IscsiLioServer.rb:429
+#. part of help text, used to describe radiobuttons (matching starting LIO target service but without "&")
+#: src/include/iscsi-lio-server/dialogs.rb:285
+#: src/modules/IscsiLioServer.rb:429
msgid "When Booting"
msgstr "引导时"
-#. part of help text, used to describe radiobuttons (matching starting LIO target service but without "&")
-#: src/include/iscsi-lio-server/dialogs.rb:287
-#: src/modules/IscsiLioServer.rb:431
+#. part of help text, used to describe radiobuttons (matching starting LIO target service but without "&")
+#: src/include/iscsi-lio-server/dialogs.rb:287
+#: src/modules/IscsiLioServer.rb:431
msgid "Manually"
msgstr "手动"
-#: src/include/iscsi-lio-server/dialogs.rb:321
+#: src/include/iscsi-lio-server/dialogs.rb:321
msgid "TPG Status"
msgstr "TPG 状态"
-#. dialog for expert settings
-#: src/include/iscsi-lio-server/dialogs.rb:370
+#. dialog for expert settings
+#: src/include/iscsi-lio-server/dialogs.rb:370
msgid "Key"
msgstr "键"
-#: src/include/iscsi-lio-server/dialogs.rb:370
+#: src/include/iscsi-lio-server/dialogs.rb:370
msgid "Value"
msgstr "值"
-#. Summary dialog
-#. @return dialog result
-#. Main dialog - tabbed
-#: src/include/iscsi-lio-server/dialogs.rb:431
+#. Summary dialog
+#. @return dialog result
+#. Main dialog - tabbed
+#: src/include/iscsi-lio-server/dialogs.rb:431
msgid "iSCSI LIO Target Overview"
msgstr "iSCSI LIO 目标概述"
-#. expert dialog
-#. LUN details
-#: src/include/iscsi-lio-server/dialogs.rb:439
-#: src/include/iscsi-lio-server/helps.rb:179
-#: src/include/iscsi-lio-server/helps.rb:184
+#. expert dialog
+#. LUN details
+#: src/include/iscsi-lio-server/dialogs.rb:439
+#: src/include/iscsi-lio-server/helps.rb:179
+#: src/include/iscsi-lio-server/helps.rb:184
msgid "<h1>iSCSI Target</h1>"
msgstr "<h1>iSCSI 目标</h1>"
-#. dialog for add target
-#: src/include/iscsi-lio-server/dialogs.rb:474
+#. dialog for add target
+#: src/include/iscsi-lio-server/dialogs.rb:474
msgid "Add iSCSI Target"
msgstr "添加 iSCSI 目标"
-#. dialog for modifying initiator setup for a target
-#. (includes authentication)
-#: src/include/iscsi-lio-server/dialogs.rb:509
+#. dialog for modifying initiator setup for a target
+#. (includes authentication)
+#: src/include/iscsi-lio-server/dialogs.rb:509
msgid "Modify iSCSI Target Initiator Setup"
msgstr "修改 iSCSI 目标发起端设置"
-#. edit target dialog
-#: src/include/iscsi-lio-server/dialogs.rb:543
+#. edit target dialog
+#: src/include/iscsi-lio-server/dialogs.rb:543
msgid "Modify iSCSI Target Lun Setup"
msgstr "修改 iSCSI 目标 Lun 设置"
-#. expert target dialog
-#: src/include/iscsi-lio-server/dialogs.rb:576
+#. expert target dialog
+#: src/include/iscsi-lio-server/dialogs.rb:576
msgid "iSCSI Target Expert Settings"
msgstr "iSCSI 目标专家设置"
-#. Read dialog help 1/2
-#: src/include/iscsi-lio-server/helps.rb:38
+#. Read dialog help 1/2
+#: src/include/iscsi-lio-server/helps.rb:38
msgid ""
"<p><b><big>Initializing iSCSI LIO Target Configuration</big></b><br>\n"
"Please wait...<br></p>\n"
@@ -259,8 +259,8 @@
"<p><b><big>正在初始化 iSCSI LIO 目标配置</big></b><br>\n"
"请稍候...<br></p>\n"
-#. Read dialog help 2/2
-#: src/include/iscsi-lio-server/helps.rb:42
+#. Read dialog help 2/2
+#: src/include/iscsi-lio-server/helps.rb:42
msgid ""
"<p><b><big>Aborting Initialization</big></b><br>\n"
"Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n"
@@ -268,8 +268,8 @@
"<p><b><big>正在中止初始化</big></b><br>\n"
"可以按<b>中止</b>立即安全地中止配置实用程序。</p>\n"
-#. Write dialog help 1/2
-#: src/include/iscsi-lio-server/helps.rb:47
+#. Write dialog help 1/2
+#: src/include/iscsi-lio-server/helps.rb:47
msgid ""
"<p><b><big>Saving iSCSI Target Configuration</big></b><br>\n"
"Please wait...<br></p>\n"
@@ -277,8 +277,8 @@
"<p><b><big>正在保存 iSCSI 目标配置</big></b><br>\n"
"请稍候...<br></p>\n"
-#. Write dialog help 2/2
-#: src/include/iscsi-lio-server/helps.rb:51
+#. Write dialog help 2/2
+#: src/include/iscsi-lio-server/helps.rb:51
msgid ""
"<p><b><big>Aborting Saving:</big></b><br>\n"
"Abort the save procedure by pressing <b>Abort</b>.\n"
@@ -290,7 +290,7 @@
"将另外显示一个对话框，说明执行此操作是否安全。\n"
"</p>\n"
-#: src/include/iscsi-lio-server/helps.rb:57
+#: src/include/iscsi-lio-server/helps.rb:57
msgid ""
"<p><b>Save</b> button will export some information about\n"
"targets into selected file.</p>"
@@ -298,8 +298,8 @@
"<p><b>保存</b>按钮会将目标的一些相关信息导出到\n"
"选定文件中。</p>"
-#. Summary dialog help 1/3
-#: src/include/iscsi-lio-server/helps.rb:61
+#. Summary dialog help 1/3
+#: src/include/iscsi-lio-server/helps.rb:61
msgid ""
"<p><b><big>iSCSI Target Configuration</big></b><br>\n"
"Configure an iSCSI target here.<br></p>\n"
@@ -307,8 +307,8 @@
"<p><b><big>iSCSI 目标配置</big></b><br>\n"
"在此处配置 iSCSI 目标。<br></p>\n"
-#. Summary dialog help 2/3
-#: src/include/iscsi-lio-server/helps.rb:65
+#. Summary dialog help 2/3
+#: src/include/iscsi-lio-server/helps.rb:65
msgid ""
"<p><b><big>Adding an iSCSI Target</big></b><br>\n"
"Choose an iSCSI target from the list of detected iSCSI targets.\n"
@@ -320,8 +320,8 @@
"如果没有检测到您的目标，请使用<b>其他（未检测到）</b>。\n"
"然后按<b>配置</b>。</p>\n"
-#. Summary dialog help 3/3
-#: src/include/iscsi-lio-server/helps.rb:72
+#. Summary dialog help 3/3
+#: src/include/iscsi-lio-server/helps.rb:72
msgid ""
"<p><b><big>Editing or Deleting</big></b><br>\n"
"If you press <b>Edit</b>, an additional dialog in which to change\n"
@@ -331,8 +331,8 @@
"如果按<b>编辑</b>，则将打开另一个对话框，您可在其中更改\n"
"配置。</p>\n"
-#. Ovreview dialog help 1/3
-#: src/include/iscsi-lio-server/helps.rb:78
+#. Ovreview dialog help 1/3
+#: src/include/iscsi-lio-server/helps.rb:78
msgid ""
"<p><b><big>iSCSI Target Configuration Overview</big></b><br>\n"
"Obtain an overview of installed iSCSI targets. Additionally\n"
@@ -342,8 +342,8 @@
"获取已安装的 iSCSI 目标的概述。此外，\n"
"对它们的配置进行编辑。<br></p>\n"
-#. Ovreview dialog help 2/3
-#: src/include/iscsi-lio-server/helps.rb:84
+#. Ovreview dialog help 2/3
+#: src/include/iscsi-lio-server/helps.rb:84
msgid ""
"<p><b><big>Adding an iSCSI Target</big></b><br>\n"
"Press <b>Add</b> to configure an iSCSI target.</p>"
@@ -351,8 +351,8 @@
"<p><b><big>添加 iSCSI 目标</big></b><br>\n"
"按<b>添加</b>以配置一个 iSCSI 目标。</p>"
-#. Ovreview dialog help 3/3
-#: src/include/iscsi-lio-server/helps.rb:89
+#. Ovreview dialog help 3/3
+#: src/include/iscsi-lio-server/helps.rb:89
msgid ""
"<p><b><big>Editing or Deleting</big></b><br>\n"
"Choose an iSCSI target to change or remove.\n"
@@ -362,8 +362,8 @@
"选择一个要更改或删除的 iSCSI 目标。\n"
"然后根据需要按<b>编辑</b>或<b>删除</b>。</p>\n"
-#. Configure1 dialog help 1/2
-#: src/include/iscsi-lio-server/helps.rb:95
+#. Configure1 dialog help 1/2
+#: src/include/iscsi-lio-server/helps.rb:95
msgid ""
"<p><b><big>Configuration Part One</big></b><br>\n"
"Press <b>Next</b> to continue.\n"
@@ -373,10 +373,10 @@
"按<b>下一步</b>继续。\n"
"<br></p>"
-#. Configure1 dialog help 2/2
-#. Configure2 dialog help 2/2
-#: src/include/iscsi-lio-server/helps.rb:101
-#: src/include/iscsi-lio-server/helps.rb:113
+#. Configure1 dialog help 2/2
+#. Configure2 dialog help 2/2
+#: src/include/iscsi-lio-server/helps.rb:101
+#: src/include/iscsi-lio-server/helps.rb:113
msgid ""
"<p><b><big>Selecting Something</big></b><br>\n"
"It is not possible. You must code it first. :-)\n"
@@ -386,8 +386,8 @@
"暂不可用，必须先对其进行编码。:-)\n"
"</p>"
-#. Configure2 dialog help 1/2
-#: src/include/iscsi-lio-server/helps.rb:107
+#. Configure2 dialog help 1/2
+#: src/include/iscsi-lio-server/helps.rb:107
msgid ""
"<p><b><big>Configuration Part Two</big></b><br>\n"
"Press <b>Next</b> to continue.\n"
@@ -397,80 +397,55 @@
"按<b>下一步</b>继续。\n"
"<br></p>\n"
-#. discovery authentication
-#: src/include/iscsi-lio-server/helps.rb:119
-msgid ""
-"Select the type of authentication. Use <b>No Authentication</b> or one of "
-"<b>Incoming</b> and <b>Outgoing</b> (can be both together). Then insert "
-"<b>User</b> and <b>Password</b>."
-msgstr ""
-"选择身份验证类型。使用<b>无身份验证</b>或<b>传入</b>和<b>传出</b>两者之一（也"
-"可使用这两者）。然后插入<b>用户</b>和<b>口令</b>。"
+#. discovery authentication
+#: src/include/iscsi-lio-server/helps.rb:119
+msgid "Select the type of authentication. Use <b>No Authentication</b> or one of <b>Incoming</b> and <b>Outgoing</b> (can be both together). Then insert <b>User</b> and <b>Password</b>."
+msgstr "选择身份验证类型。使用<b>无身份验证</b>或<b>传入</b>和<b>传出</b>两者之一（也可使用这两者）。然后插入<b>用户</b>和<b>口令</b>。"
-#. target client setup.
-#: src/include/iscsi-lio-server/helps.rb:124
+#. target client setup.
+#: src/include/iscsi-lio-server/helps.rb:124
msgid ""
-"<p>Use <b>Add</b> to give an initiator (iSCSI client) access to a LUN "
-"imported from\n"
-" target portal group. Specify which initiator is allowed to connect (use "
-"<i>InitiatorName</i>\n"
-" from '/etc/iscsi/initiatorname.iscsi' on iSCSI initiator). <b>Delete</b> "
-"will remove the initiator access to the LUN.</p>"
+"<p>Use <b>Add</b> to give an initiator (iSCSI client) access to a LUN imported from\n"
+" target portal group. Specify which initiator is allowed to connect (use <i>InitiatorName</i>\n"
+" from '/etc/iscsi/initiatorname.iscsi' on iSCSI initiator). <b>Delete</b> will remove the initiator access to the LUN.</p>"
msgstr ""
-"<p>使用<b>添加</b>可向某个发起端（iSCSI 客户端）授予访问从目标门户组导入的 "
-"LUN 的权限。\n"
-"请指定允许哪个发起端连接它（使用 iSCSI 发起端上“/etc/iscsi/initiatorname."
-"iscsi”中的 <i>InitiatorName</i>）。\n"
+"<p>使用<b>添加</b>可向某个发起端（iSCSI 客户端）授予访问从目标门户组导入的 LUN 的权限。\n"
+"请指定允许哪个发起端连接它（使用 iSCSI 发起端上“/etc/iscsi/initiatorname.iscsi”中的 <i>InitiatorName</i>）。\n"
"单击<b>删除</b>将会去除发起端对该 LUN 的访问权限。</p>"
-#: src/include/iscsi-lio-server/helps.rb:130
+#: src/include/iscsi-lio-server/helps.rb:130
msgid ""
-"<p>With <b>Edit LUN</b> one can modify the LUN mapping. Please note that LUN "
-"target number must be unique.<br>After pressing <b>Edit Auth</b>, select the "
-"type of authentication. Use <b>Incoming</b>, <b>Outgoing</b> or both "
-"together. Then insert <b>User</b> and <b>Password</b>. Please make sure to "
-"set different passwords for incoming and outgoing authentication.\n"
-" If <b>Use Authentication</b> is disabled in previous dialog, <b>Edit Auth is disabled here.</p>"
+"<p>With <b>Edit LUN</b> one can modify the LUN mapping. Please note that LUN target number must be unique.<br>After pressing <b>Edit Auth</b>, select the type of authentication. Use <b>Incoming</b>, <b>Outgoing</b> or both together. Then insert <b>User</b> and <b>Password</b>. Please make sure to set different passwords for incoming and outgoing authentication.\n"
+" If <b>Use Authentication</b> is disabled in previous dialog, <b>Edit Auth</b> is disabled here.</p>"
msgstr ""
-"<p>使用<b>编辑 LUN</b> 可以修改 LUN 映射。请注意，LUN 目标编号必须唯一。<br>"
-"按<b>编辑身份验证</b>后，请选择身份验证类型。请使用<b>传入</b>、<b>传出</b>或"
-"同时使用这两项。然后插入<b>用户</b>和<b>口令</b>。请务必为传入和传出身份验证"
-"设置不同的口令。\n"
-"如果在上个对话框中禁用了<b>使用身份验证</b>，则此处的<b>编辑身份验证</b>将被"
-"禁用。</p>"
+"<p>使用<b>编辑 LUN</b> 可以修改 LUN 映射。请注意，LUN 目标编号必须唯一。<br>按<b>编辑身份验证</b>后，请选择身份验证类型。请使用<b>传入</b>、<b>传出</b>或同时使用这两项。然后插入<b>用户</b>和<b>口令</b>。请务必为传入和传出身份验证设置不同的口令。\n"
+"如果在上个对话框中禁用了<b>使用身份验证</b>，则此处的<b>编辑身份验证</b>将被禁用。</p>"
-#: src/include/iscsi-lio-server/helps.rb:137
-msgid ""
-"<p><b>Copy</b> offers the possibility to give an additional initiator access "
-"to the LUN.</p>"
+#: src/include/iscsi-lio-server/helps.rb:137
+msgid "<p><b>Copy</b> offers the possibility to give an additional initiator access to the LUN.</p>"
msgstr "<p>使用<b>复制</b>可向一个额外的发起端授予对该 LUN 的访问权限。</p>"
-#. target dialog
-#: src/include/iscsi-lio-server/helps.rb:139
+#. target dialog
+#: src/include/iscsi-lio-server/helps.rb:139
msgid ""
-"List of offered targets and target portal groups. Create a new target by "
-"clicking <b>Add</b>.\n"
-"To delete or modify an item, select it and press <b>Edit</b> or <b>Delete."
+"List of offered targets and target portal groups. Create a new target by clicking <b>Add</b>.\n"
+"To delete or modify an item, select it and press <b>Edit</b> or <b>Delete</b>."
msgstr ""
"提供的目标和目标门户组的列表。单击<b>添加</b>可创建新目标。\n"
"要删除或修改某个项目，请选择该项目并按<b>编辑</b>或<b>删除</b>。"
-#. edit target
-#. add target
-#: src/include/iscsi-lio-server/helps.rb:144
-#: src/include/iscsi-lio-server/helps.rb:160
+#. edit target
+#. add target
+#: src/include/iscsi-lio-server/helps.rb:144
+#: src/include/iscsi-lio-server/helps.rb:160
msgid "<h1>iSCSI Target IP/Port and LUN setup</h1>"
msgstr "<h1>iSCSI 目标 IP/端口和 LUN 设置</h1>"
-#: src/include/iscsi-lio-server/helps.rb:147
+#: src/include/iscsi-lio-server/helps.rb:147
msgid ""
-"It is possible to make arbitary block devices or files available under a "
-"<b>LUN</b>.\n"
+"It is possible to make arbitary block devices or files available under a <b>LUN</b>.\n"
"You have to provide <b>path</b> to either block devices or file. \n"
-"The <b>LUN name</b> is an arbitrary name to uniquely identify the <b>LUN. \n"
+"The <b>LUN name</b> is an arbitrary name to uniquely identify the <b>LUN</b>. \n"
"The name needs to be unique within the target portal group. If the user\n"
"does not provide a name for LUN, it is generated automatically."
msgstr ""
@@ -480,11 +455,10 @@
"该名称在目标门户组中必须唯一。如果用户\n"
"未提供 LUN 的名称，则系统会自动生成一个。"
-#: src/include/iscsi-lio-server/helps.rb:154
-#: src/include/iscsi-lio-server/helps.rb:173
+#: src/include/iscsi-lio-server/helps.rb:154
+#: src/include/iscsi-lio-server/helps.rb:173
msgid ""
-"<p>Under <b>Ip Address</b> and <b>Port Number</b> you specify under which "
-"address\n"
+"<p>Under <b>Ip Address</b> and <b>Port Number</b> you specify under which address\n"
"and port the service will be available. Default for port number is 3260.\n"
"Only ip addresses assigned to one of the network cards are possible."
msgstr ""
@@ -492,17 +466,15 @@
"和端口。默认端口号为 3260。\n"
"只能使用指派给其中一个网卡的 IP 地址。"
-#: src/include/iscsi-lio-server/helps.rb:163
+#: src/include/iscsi-lio-server/helps.rb:163
msgid "Create a new target. Replace template values with the correct values."
msgstr "创建新目标。使用正确的值替换模板值。"
-#: src/include/iscsi-lio-server/helps.rb:166
+#: src/include/iscsi-lio-server/helps.rb:166
msgid ""
-"It is possible to make arbitary block devices or files available under a "
-"lun.\n"
+"It is possible to make arbitary block devices or files available under a lun.\n"
"You have to provide <b>path</b> to either block devices or file. \n"
-"The <b>LUN name</b> is an arbitrary name to uniquely identify the <b>LUN. \n"
+"The <b>LUN name</b> is an arbitrary name to uniquely identify the <b>LUN</b>. \n"
"The name needs to be unique within the target portal group. If the user\n"
"does not provide a name for LUN, it is generated automatically."
msgstr ""
@@ -512,189 +484,184 @@
"该名称在目标门户组中必须是唯一的。如果用户\n"
"未提供 LUN 的名称，则系统会自动生成一个。"
-#: src/include/iscsi-lio-server/helps.rb:180
-msgid ""
-"It is possible to <b>add</b>, <b>edit</b> or <b>delete</b> all additional "
-"configuration options."
+#: src/include/iscsi-lio-server/helps.rb:180
+msgid "It is possible to <b>add</b>, <b>edit</b> or <b>delete</b> all additional configuration options."
msgstr "可以<b>添加</b>、<b>编辑</b>或<b>删除</b>所有其他配置选项。"
-#: src/include/iscsi-lio-server/helps.rb:185
+#: src/include/iscsi-lio-server/helps.rb:185
msgid ""
-"Edit <b>LUN</b> number if needed, set <b>Type</b> (nullio is for testing "
-"purposes).\n"
-"If Type=fileio set <b>Path</b> to disk device or file.<b>SCSI ID</b> and "
-"<b>Sectors</b> are optional."
+"Edit <b>LUN</b> number if needed, set <b>Type</b> (nullio is for testing purposes).\n"
+"If Type=fileio set <b>Path</b> to disk device or file.<b>SCSI ID</b> and <b>Sectors</b> are optional."
msgstr ""
"编辑 <b>LUN</b> 编号（如果需要），设置 <b>Type</b>（nullio 用于测试）。\n"
-"如果 Type = fileio，则请设置磁盘设备或文件的 <b>Path</b>。<b>SCSI ID</b> 和 "
-"<b>Sectors</b> 为可选项。"
+"如果 Type = fileio，则请设置磁盘设备或文件的 <b>Path</b>。<b>SCSI ID</b> 和 <b>Sectors</b> 为可选项。"
-#. save discovery authentication or authentication for given target
-#: src/include/iscsi-lio-server/widgets.rb:156
+#. save discovery authentication or authentication for given target
+#: src/include/iscsi-lio-server/widgets.rb:156
msgid "Problem changing authentication"
msgstr "更改身份验证时出现问题"
-#. validate functions checks the secret for incoming and outgoing cannot be same
-#: src/include/iscsi-lio-server/widgets.rb:172
-#: src/include/iscsi-lio-server/widgets.rb:182
+#. validate functions checks the secret for incoming and outgoing cannot be same
+#: src/include/iscsi-lio-server/widgets.rb:172
+#: src/include/iscsi-lio-server/widgets.rb:182
msgid "Invalid Username"
msgstr "无效用户名"
-#: src/include/iscsi-lio-server/widgets.rb:172
-#: src/include/iscsi-lio-server/widgets.rb:182
+#: src/include/iscsi-lio-server/widgets.rb:172
+#: src/include/iscsi-lio-server/widgets.rb:182
msgid "Invalid Password."
msgstr "口令无效。"
-#: src/include/iscsi-lio-server/widgets.rb:262
+#: src/include/iscsi-lio-server/widgets.rb:262
msgid "Selected LUN is already in use!"
msgstr "选定的 LUN 已在使用中！"
-#: src/include/iscsi-lio-server/widgets.rb:271
+#: src/include/iscsi-lio-server/widgets.rb:271
msgid "Selected Name is already in use!"
msgstr "所选名称已在使用！"
-#: src/include/iscsi-lio-server/widgets.rb:280
+#: src/include/iscsi-lio-server/widgets.rb:280
msgid "Selected Path must be either block device or normal file!"
msgstr "选定的路径必须为块设备或一般文件的路径！"
-#: src/include/iscsi-lio-server/widgets.rb:286
+#: src/include/iscsi-lio-server/widgets.rb:286
msgid "Selected Path is already in use!"
msgstr "选定的路径已在使用！"
-#: src/include/iscsi-lio-server/widgets.rb:321
+#: src/include/iscsi-lio-server/widgets.rb:321
msgid "Path:"
msgstr "路径："
-#: src/include/iscsi-lio-server/widgets.rb:324
+#: src/include/iscsi-lio-server/widgets.rb:324
msgid "Browse"
msgstr "浏览"
-#: src/include/iscsi-lio-server/widgets.rb:344
+#: src/include/iscsi-lio-server/widgets.rb:344
msgid "Select file or device"
msgstr "选择文件或设备"
-#: src/include/iscsi-lio-server/widgets.rb:447
+#: src/include/iscsi-lio-server/widgets.rb:447
msgid "Initiator LUN"
msgstr "发起端 LUN"
-#: src/include/iscsi-lio-server/widgets.rb:447
+#: src/include/iscsi-lio-server/widgets.rb:447
msgid "Target LUN"
msgstr "目标 LUN"
-#: src/include/iscsi-lio-server/widgets.rb:455
+#: src/include/iscsi-lio-server/widgets.rb:455
msgid "Change:"
msgstr "更改："
-#: src/include/iscsi-lio-server/widgets.rb:548
+#: src/include/iscsi-lio-server/widgets.rb:548
msgid "Target LUN %1 used more than once!"
msgstr "目标 LUN %1 已使用多次！"
-#: src/include/iscsi-lio-server/widgets.rb:610
+#: src/include/iscsi-lio-server/widgets.rb:610
msgid "Need to enable at least one Authentification!"
msgstr "需要至少启用一项身份验证！"
-#: src/include/iscsi-lio-server/widgets.rb:630
+#: src/include/iscsi-lio-server/widgets.rb:630
msgid "Initiator name:"
msgstr "发起端名称："
-#: src/include/iscsi-lio-server/widgets.rb:633
+#: src/include/iscsi-lio-server/widgets.rb:633
msgid "Import LUNs from TPG"
msgstr "从 TPG 中导入 LUN"
-#: src/include/iscsi-lio-server/widgets.rb:649
-#: src/include/iscsi-lio-server/widgets.rb:706
+#: src/include/iscsi-lio-server/widgets.rb:649
+#: src/include/iscsi-lio-server/widgets.rb:706
msgid "Initiator name must not be empty!"
msgstr "发起端名称不能为空！"
-#. Don't check IscsiLioData.GetClntList(@curr_target, @curr_tpg) for existing
-#. initiator name. It's allowed to have several LUNs accessable for same initiator.
-#. TODO: verify whether it's necessary to check @changed_lun here?
-#: src/include/iscsi-lio-server/widgets.rb:655
-#: src/include/iscsi-lio-server/widgets.rb:712
+#. Don't check IscsiLioData.GetClntList(@curr_target, @curr_tpg) for existing
+#. initiator name. It's allowed to have several LUNs accessable for same initiator.
+#. TODO: verify whether it's necessary to check @changed_lun here?
+#: src/include/iscsi-lio-server/widgets.rb:655
+#: src/include/iscsi-lio-server/widgets.rb:712
msgid "Initiator name already exists!"
msgstr "发起端名称已存在！"
-#. Copy exisiting LUN, i.e. give additional initiator access to the LUN
-#. (which is allowed, makes sense e.g. with multipath)
-#: src/include/iscsi-lio-server/widgets.rb:689
+#. Copy exisiting LUN, i.e. give additional initiator access to the LUN
+#. (which is allowed, makes sense e.g. with multipath)
+#: src/include/iscsi-lio-server/widgets.rb:689
msgid "New initiator name:"
msgstr "新发起端名称："
-#: src/include/iscsi-lio-server/widgets.rb:735
+#: src/include/iscsi-lio-server/widgets.rb:735
msgid "OK"
msgstr "确定"
-#: src/include/iscsi-lio-server/widgets.rb:736
+#: src/include/iscsi-lio-server/widgets.rb:736
msgid "Cancel"
msgstr "取消"
-#. create items from targets
-#: src/include/iscsi-lio-server/widgets.rb:796
+#. create items from targets
+#: src/include/iscsi-lio-server/widgets.rb:796
msgid "Enabled"
msgstr "已启用"
-#: src/include/iscsi-lio-server/widgets.rb:796
-#: src/include/iscsi-lio-server/widgets.rb:1274
-#: src/include/iscsi-lio-server/widgets.rb:1377
-#: src/include/iscsi-lio-server/widgets.rb:1414
+#: src/include/iscsi-lio-server/widgets.rb:796
+#: src/include/iscsi-lio-server/widgets.rb:1274
+#: src/include/iscsi-lio-server/widgets.rb:1377
+#: src/include/iscsi-lio-server/widgets.rb:1414
msgid "Disabled"
msgstr "已禁用"
-#. remove a item
-#. **************** Edit Dialog *****************************
-#. init values for modifying target (read it from stored map)
-#: src/include/iscsi-lio-server/widgets.rb:833
-#: src/include/iscsi-lio-server/widgets.rb:947
-#: src/include/iscsi-lio-server/widgets.rb:1301
+#. remove a item
+#. **************** Edit Dialog *****************************
+#. init values for modifying target (read it from stored map)
+#: src/include/iscsi-lio-server/widgets.rb:833
+#: src/include/iscsi-lio-server/widgets.rb:947
+#: src/include/iscsi-lio-server/widgets.rb:1301
msgid "Really delete the selected item?"
msgstr "确定要删除所选的项目吗？"
-#: src/include/iscsi-lio-server/widgets.rb:1015
+#: src/include/iscsi-lio-server/widgets.rb:1015
msgid "Problem creating target %1 with tpg %2"
msgstr "使用 tpg %2 创建目标 %1 时出现问题"
-#: src/include/iscsi-lio-server/widgets.rb:1037
+#: src/include/iscsi-lio-server/widgets.rb:1037
msgid "Problem setting network portal to %1"
msgstr "将网络门户设置为 %1 时出现问题"
-#: src/include/iscsi-lio-server/widgets.rb:1058
+#: src/include/iscsi-lio-server/widgets.rb:1058
msgid "Problem removing lun %1"
msgstr "删除 LUN %1 时出现问题"
-#: src/include/iscsi-lio-server/widgets.rb:1083
+#: src/include/iscsi-lio-server/widgets.rb:1083
msgid "Problem setting lun %1 (name:%2) to path %3"
msgstr "将 LUN %1（名称：%2）设置为路径 %3 时出现问题"
-#: src/include/iscsi-lio-server/widgets.rb:1097
+#: src/include/iscsi-lio-server/widgets.rb:1097
msgid "Problem setting auth on %1:%2 to %3"
msgstr "将 %1:%2 上的身份验证设置为 %3 时出现问题"
-#. validate function checks if target/tpg are unique and not empty
-#: src/include/iscsi-lio-server/widgets.rb:1211
+#. validate function checks if target/tpg are unique and not empty
+#: src/include/iscsi-lio-server/widgets.rb:1211
msgid "The target cannot be empty."
msgstr "目标不能为空。"
-#: src/include/iscsi-lio-server/widgets.rb:1215
+#: src/include/iscsi-lio-server/widgets.rb:1215
msgid "The target portal group cannot be empty."
msgstr "目标门户组不能为空。"
-#: src/include/iscsi-lio-server/widgets.rb:1226
+#: src/include/iscsi-lio-server/widgets.rb:1226
msgid "The target already exists."
msgstr "目标已存在。"
-#: src/include/iscsi-lio-server/widgets.rb:1246
+#: src/include/iscsi-lio-server/widgets.rb:1246
msgid "Incoming"
msgstr "接收"
-#: src/include/iscsi-lio-server/widgets.rb:1249
+#: src/include/iscsi-lio-server/widgets.rb:1249
msgid "Outgoing"
msgstr "传出"
-#: src/include/iscsi-lio-server/widgets.rb:1251
+#: src/include/iscsi-lio-server/widgets.rb:1251
msgid "None"
msgstr "无"
-#: src/include/iscsi-lio-server/widgets.rb:1463
+#: src/include/iscsi-lio-server/widgets.rb:1463
msgid ""
"There isn't any initiator specified.\n"
"To allow an initiator login to the target, please\n"
@@ -708,98 +675,98 @@
"（请参见发起端上的 /etc/iscsi/initiatorname.iscsi）。\n"
"确实要继续而不提供发起端访问信息吗？"
-#: src/include/iscsi-lio-server/widgets.rb:1477
+#: src/include/iscsi-lio-server/widgets.rb:1477
msgid "Problem removing LUN %4 for initiator %3 in %1:%2"
msgstr "去除 %1:%2 中发起端 %3 的 LUN %4 时出现问题"
-#: src/include/iscsi-lio-server/widgets.rb:1492
+#: src/include/iscsi-lio-server/widgets.rb:1492
msgid "Problem adding LUN %4:%5 for initiator %3 in %1:%2"
msgstr "为 %1:%2 中的发起端 %3 添加 LUN %4:%5 时出现问题"
-#: src/include/iscsi-lio-server/widgets.rb:1513
+#: src/include/iscsi-lio-server/widgets.rb:1513
msgid "Problem removing initiator %3 from %1:%2"
msgstr "从 %1:%2 中去除发起端 %3 时出现问题"
-#: src/include/iscsi-lio-server/widgets.rb:1537
+#: src/include/iscsi-lio-server/widgets.rb:1537
msgid "Problem creating initiator %3 for %1:%2"
msgstr "为 %1:%2 创建发起端 %3 时出现问题"
-#: src/include/iscsi-lio-server/widgets.rb:1572
+#: src/include/iscsi-lio-server/widgets.rb:1572
msgid "Problem changing auth for initiator %3 in %1:%2"
msgstr "更改 %1:%2 中发起端 %3 的身份验证时出现问题"
-#. Initialization dialog caption
-#: src/include/iscsi-lio-server/wizards.rb:110
+#. Initialization dialog caption
+#: src/include/iscsi-lio-server/wizards.rb:110
msgid "iSCSI LIO Target Configuration"
msgstr "iSCSI LIO 目标配置"
-#. Initialization dialog contents
-#: src/include/iscsi-lio-server/wizards.rb:112
+#. Initialization dialog contents
+#: src/include/iscsi-lio-server/wizards.rb:112
msgid "Initializing..."
msgstr "正在初始化..."
-#. scope link IPv6
-#: src/modules/IscsiLioData.rb:1428
+#. scope link IPv6
+#: src/modules/IscsiLioData.rb:1428
msgid "Cannot save lio setup"
msgstr "无法保存 lio 设置"
-#: src/modules/IscsiLioData.rb:1432
+#: src/modules/IscsiLioData.rb:1432
msgid "Cannot save tcm setup"
msgstr "无法保存 tcm 设置"
-#. test if required package ("lio-utils") is installed
-#: src/modules/IscsiLioServer.rb:136
+#. test if required package ("lio-utils") is installed
+#: src/modules/IscsiLioServer.rb:136
msgid "Can't continue without installing lio-utils package"
msgstr "如果未安装 lio-utils 包，则无法继续"
-#. to translator: %1 is replaced by pathname e.g. /etc/init.d/target
-#: src/modules/IscsiLioServer.rb:177
+#. to translator: %1 is replaced by pathname e.g. /etc/init.d/target
+#: src/modules/IscsiLioServer.rb:177
msgid "Could not start service \"%1\""
msgstr "无法启动服务“%1”"
-#. IscsiLioServer read dialog caption
-#: src/modules/IscsiLioServer.rb:190
+#. IscsiLioServer read dialog caption
+#: src/modules/IscsiLioServer.rb:190
msgid "Initializing iSCSI LIO Target Configuration"
msgstr "正在初始化 iSCSI LIO 目标配置"
-#. Progress stage 1/3
-#: src/modules/IscsiLioServer.rb:206
+#. Progress stage 1/3
+#: src/modules/IscsiLioServer.rb:206
msgid "Read the database"
msgstr "读取数据库"
-#. Progress stage 2/3
-#: src/modules/IscsiLioServer.rb:208
+#. Progress stage 2/3
+#: src/modules/IscsiLioServer.rb:208
msgid "Read the previous settings"
msgstr "读取以前的设置"
-#. Progress stage 3/3
-#: src/modules/IscsiLioServer.rb:210
+#. Progress stage 3/3
+#: src/modules/IscsiLioServer.rb:210
msgid "Detect the devices"
msgstr "检测设备"
-#. Progress step 1/3
-#: src/modules/IscsiLioServer.rb:214
+#. Progress step 1/3
+#: src/modules/IscsiLioServer.rb:214
msgid "Reading the database..."
msgstr "正在读取数据库..."
-#. Progress step 2/3
-#: src/modules/IscsiLioServer.rb:216
+#. Progress step 2/3
+#: src/modules/IscsiLioServer.rb:216
msgid "Reading the previous settings..."
msgstr "正在读取以前的设置..."
-#. Progress step 3/3
-#: src/modules/IscsiLioServer.rb:218
+#. Progress step 3/3
+#: src/modules/IscsiLioServer.rb:218
msgid "Detecting the devices..."
msgstr "正在检测设备..."
-#. Progress finished
-#. Progress finished
-#: src/modules/IscsiLioServer.rb:220 src/modules/IscsiLioServer.rb:306
+#. Progress finished
+#. Progress finished
+#: src/modules/IscsiLioServer.rb:220 src/modules/IscsiLioServer.rb:306
msgid "Finished"
msgstr "已完成"
-#. read configuration (/etc/ietd.conf)
-#: src/modules/IscsiLioServer.rb:245
+#. read configuration (/etc/ietd.conf)
+#: src/modules/IscsiLioServer.rb:245
msgid ""
"You have currently no active LIO targets but there seems \n"
"to be a valid config in /etc/ietd.conf. Should the module \n"
@@ -809,37 +776,37 @@
"有一个有效的配置。模块\n"
"应该尝试将设置从 /etc/ietd.conf 导入到 LIO 中吗？"
-#: src/modules/IscsiLioServer.rb:254
+#: src/modules/IscsiLioServer.rb:254
msgid "Errors during import. Check LIO state!"
msgstr "导入时发生错误。请检查 LIO 状态！"
-#. IscsiLioServer write dialog caption
-#: src/modules/IscsiLioServer.rb:281
+#. IscsiLioServer write dialog caption
+#: src/modules/IscsiLioServer.rb:281
msgid "Saving iSCSI LIO Target Configuration"
msgstr "正在保存 iSCSI LIO 目标配置"
-#. Progress stage 1/2
-#: src/modules/IscsiLioServer.rb:296
+#. Progress stage 1/2
+#: src/modules/IscsiLioServer.rb:296
msgid "Write firewall settings"
msgstr "写入防火墙设置"
-#. Progress stage 2/2
-#: src/modules/IscsiLioServer.rb:298
+#. Progress stage 2/2
+#: src/modules/IscsiLioServer.rb:298
msgid "Write lio configuration"
msgstr "写入 lio 配置"
-#. Progress step 1/2
-#: src/modules/IscsiLioServer.rb:302
+#. Progress step 1/2
+#: src/modules/IscsiLioServer.rb:302
msgid "Writing the firewall settings..."
msgstr "正在写入防火墙设置..."
-#. Progress step 2/2
-#: src/modules/IscsiLioServer.rb:304
+#. Progress step 2/2
+#: src/modules/IscsiLioServer.rb:304
msgid "Writing lio configuration..."
msgstr "正在写入 lio 配置..."
-#. Create a textual summary and a list of unconfigured cards
-#. @return summary of the current configuration
-#: src/modules/IscsiLioServer.rb:425
+#. Create a textual summary and a list of unconfigured cards
+#. @return summary of the current configuration
+#: src/modules/IscsiLioServer.rb:425
msgid "Configuration summary..."
msgstr "配置摘要..."
Modified: branches/SLE12-SP2/yast/zh_CN/po/isns.zh_CN.po
===================================================================
--- branches/SLE12-SP2/yast/zh_CN/po/isns.zh_CN.po 2016-09-15 14:04:11 UTC (rev 96924)
+++ branches/SLE12-SP2/yast/zh_CN/po/isns.zh_CN.po 2016-09-15 14:54:06 UTC (rev 96925)
@@ -14,109 +14,109 @@
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#. Command line help text for the Xisns module
-#: src/clients/isns.rb:35
+#. Command line help text for the Xisns module
+#: src/clients/isns.rb:35
msgid "Configuration of an isns service"
msgstr "isns 服务的配置"
-#. progress step title
-#: src/clients/isns_finish.rb:44
+#. progress step title
+#: src/clients/isns_finish.rb:44
msgid "Saving iSCSI configuration..."
msgstr "正在保存 iSCSI 配置..."
-#. Rich text title for IsnsServer in proposals
-#: src/clients/isns_proposal.rb:65
+#. Rich text title for IsnsServer in proposals
+#: src/clients/isns_proposal.rb:65
msgid "iSCSI Initiator"
msgstr "iSCSI 发起端"
-#. Menu title for IsnsServer in proposals
-#: src/clients/isns_proposal.rb:69
+#. Menu title for IsnsServer in proposals
+#: src/clients/isns_proposal.rb:69
msgid "&iSCSI Initiator"
msgstr "iSCSI 发起端(&I)"
-#. first tab - service status and firewall
-#: src/include/isns/dialogs.rb:34
+#. first tab - service status and firewall
+#: src/include/isns/dialogs.rb:34
msgid "Service"
msgstr "服务"
-#. second tab - iSCSI Nodes
-#: src/include/isns/dialogs.rb:55 src/include/isns/dialogs.rb:102
+#. second tab - iSCSI Nodes
+#: src/include/isns/dialogs.rb:55 src/include/isns/dialogs.rb:102
msgid "iSCSI Nodes"
msgstr "ISCSI 节点"
-#. third tab - Discovery Domains
-#: src/include/isns/dialogs.rb:65 src/include/isns/dialogs.rb:120
+#. third tab - Discovery Domains
+#: src/include/isns/dialogs.rb:65 src/include/isns/dialogs.rb:120
msgid "Discovery Domains"
msgstr "发现域"
-#: src/include/isns/dialogs.rb:87
+#: src/include/isns/dialogs.rb:87
msgid "When &Booting"
msgstr "引导时(&B)"
-#: src/include/isns/dialogs.rb:88
+#: src/include/isns/dialogs.rb:88
msgid "&Manually"
msgstr "手动(&M)"
-#: src/include/isns/dialogs.rb:91
+#: src/include/isns/dialogs.rb:91
msgid "When Booting"
msgstr "引导时"
-#: src/include/isns/dialogs.rb:92
+#: src/include/isns/dialogs.rb:92
msgid "Manually"
msgstr "手动"
-#: src/include/isns/dialogs.rb:105 src/include/isns/dialogs.rb:156
-#: src/include/isns/widgets.rb:66
+#: src/include/isns/dialogs.rb:105 src/include/isns/dialogs.rb:156
+#: src/include/isns/widgets.rb:66
msgid "iSCSI Node Name"
msgstr "iSCSI 节点名称"
-#: src/include/isns/dialogs.rb:105 src/include/isns/dialogs.rb:156
-#: src/include/isns/widgets.rb:108
+#: src/include/isns/dialogs.rb:105 src/include/isns/dialogs.rb:156
+#: src/include/isns/widgets.rb:108
msgid "Node Type"
msgstr "节点类型"
-#: src/include/isns/dialogs.rb:108 src/include/isns/dialogs.rb:133
+#: src/include/isns/dialogs.rb:108 src/include/isns/dialogs.rb:133
msgid "Delete"
msgstr "删除"
-#: src/include/isns/dialogs.rb:126 src/include/isns/widgets.rb:29
+#: src/include/isns/dialogs.rb:126 src/include/isns/widgets.rb:29
msgid "Discovery Domain Name"
msgstr "发现域名"
-#: src/include/isns/dialogs.rb:132
+#: src/include/isns/dialogs.rb:132
msgid "Create Discovery Domain"
msgstr "创建发现域"
-#: src/include/isns/dialogs.rb:151
+#: src/include/isns/dialogs.rb:151
msgid "Discovery Domain Members"
msgstr "发现域成员"
-#: src/include/isns/dialogs.rb:162
+#: src/include/isns/dialogs.rb:162
msgid "Add Existing iSCSI Node"
msgstr "添加现有的 iSCSI 节点"
-#: src/include/isns/dialogs.rb:163
+#: src/include/isns/dialogs.rb:163
msgid "Create iSCSI Node Member"
msgstr "创建 iSCSI 节点成员"
-#: src/include/isns/dialogs.rb:164
+#: src/include/isns/dialogs.rb:164
msgid "Remove"
msgstr "删除"
-#. Summary dialog
-#. @return dialog result
-#. Main dialog - tabbed
-#: src/include/isns/dialogs.rb:185
+#. Summary dialog
+#. @return dialog result
+#. Main dialog - tabbed
+#: src/include/isns/dialogs.rb:185
msgid "iSNS Service"
msgstr "isns 服务"
-#. curr_target = "";
-#: src/include/isns/dialogs.rb:198
+#. curr_target = "";
+#: src/include/isns/dialogs.rb:198
msgid "<h1>iSNS Service</h1>"
msgstr "<h1>isns 服务</h1>"
-#. Read dialog help 1/2
-#: src/include/isns/helps.rb:17
+#. Read dialog help 1/2
+#: src/include/isns/helps.rb:17
msgid ""
"<p><b><big>Initializing iSNS daemon configuration</big></b><br>\n"
"</p>\n"
@@ -124,8 +124,8 @@
"<p><b><big>正在初始化 iSNS 守护程序配置</big></b><br>\n"
"</p>\n"
-#. Read dialog help 2/2
-#: src/include/isns/helps.rb:21
+#. Read dialog help 2/2
+#: src/include/isns/helps.rb:21
msgid ""
"<p><b><big>Aborting Initialization</big></b><br>\n"
"Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n"
@@ -133,8 +133,8 @@
"<p><b><big>正在中止初始化</big></b><br>\n"
"可以按<b>中止</b>立即安全地中止配置使用程序。</p>\n"
-#. Write dialog help 1/2
-#: src/include/isns/helps.rb:25
+#. Write dialog help 1/2
+#: src/include/isns/helps.rb:25
msgid ""
"<p><b><big>Saving iSNS Configuration</big></b><br>\n"
"</p>\n"
@@ -142,8 +142,8 @@
"<p><b><big>正在保存 iSNS 配置</big></b><br>\n"
"</p>\n"
-#. Write dialog help 2/2
-#: src/include/isns/helps.rb:29
+#. Write dialog help 2/2
+#: src/include/isns/helps.rb:29
msgid ""
"<p><b><big>Aborting Saving:</big></b><br>\n"
"Abort the save procedure by pressing <b>Abort</b>.\n"
@@ -155,8 +155,8 @@
"一个附加对话框将告诉您这样做是否安全.\n"
"</p>\n"
-#. Summary dialog help 1/3
-#: src/include/isns/helps.rb:36
+#. Summary dialog help 1/3
+#: src/include/isns/helps.rb:36
msgid ""
"<p><b><big>iSNS Configuration</big></b><br>\n"
"Configure an iSNS server.<br></p>\n"
@@ -164,136 +164,96 @@
"<p><b><big>iSNS 配置</big></b><br>\n"
"配置一个 iSNS 服务器。<br></p>\n"
-#: src/include/isns/helps.rb:39
-msgid ""
-"<p>The list of all available iSCSI nodes registered with the iSNS service "
-"are displayed.</p> <p>Nodes are registered by iSCSI initiators and iSCSI "
-"targets.</p> <p> It is only possible to <b>delete</b> them. Deleting a node "
-"removes it from the iSNS database.</p>"
-msgstr ""
-"<p>显示了向 iSNS 服务注册的所有可用 iSCSI 节点的列表。</p> <p>由 iSCSI 发起端"
-"和 iSCSI 目标注册的节点。</p> <p>仅能将其<b>删除</b>。删除某个节点会将其从 "
-"iSNS 数据库中去除。</p>"
+#: src/include/isns/helps.rb:39
+msgid "<p>The list of all available iSCSI nodes registered with the iSNS service are displayed.</p> <p>Nodes are registered by iSCSI initiators and iSCSI targets.</p> <p> It is only possible to <b>delete</b> them. Deleting a node removes it from the iSNS database.</p>"
+msgstr "<p>显示了向 iSNS 服务注册的所有可用 iSCSI 节点的列表。</p> <p>由 iSCSI 发起端和 iSCSI 目标注册的节点。</p> <p>仅能将其<b>删除</b>。删除某个节点会将其从 iSNS 数据库中去除。</p>"
-#. discovery domains
-#: src/include/isns/helps.rb:43
-msgid ""
-"A list of all discovery domains is displayed. It is possible to <b>Create a discovery domain or <b>Delete</b> one. <p>Deleting a domain removes the "
-"members from the domain but does not delete the iSCSI node members.</p>"
-msgstr ""
-"显示了全部发现域列表。可以<b>创建</b>或<b>删除</b>一个发现域。<p>删除一个发现"
-"域将从此域去除成员，但不会删除 iSCSI 节点成员本身。</p>"
+#. discovery domains
+#: src/include/isns/helps.rb:43
+msgid "A list of all discovery domains is displayed. It is possible to <b>Create</b> a discovery domain or <b>Delete</b> one. <p>Deleting a domain removes the members from the domain but does not delete the iSCSI node members.</p>"
+msgstr "显示了全部发现域列表。可以<b>创建</b>或<b>删除</b>一个发现域。<p>删除一个发现域将从此域去除成员，但不会删除 iSCSI 节点成员本身。</p>"
-#: src/include/isns/helps.rb:46
-msgid ""
-"A list of all iSCSI nodes are displayed by discovery domain. Selecting "
-"another discovery domain refreshes the list with members from that discovery "
-"domain. It is possible to <b>Add</b> an iSCSI node to a discovery domain or "
-"<b>Delete</b> the node. <p>Deleting a node removes it from the domain but "
-"does not delete the iSCSI node</p> <p>Creating an iSCSI node allows a not "
-"yet registered node to be added as a member of the discovery domain. When "
-"the initiator or target registers this node then it becomes part of this "
-"domain</p> <p>When an iSCSI initiator does a discovery request, the iSNS "
-"service returns all iSCSI node targets that are members of the same "
-"Discovery Domains.</p> "
-msgstr ""
-"发现域显示了全部 iSCSI 节点列表。选择另一个发现域将刷新列表，显示该发现域的成"
-"员。可以将一个 iSCSI 节点<b>添加</b>到一个发现域，或从一个发现域<b>删除</b>节"
-"点。<p>删除节点会将其从发现域中去除</p><p>创建一个 iSCSI 节点允许将一个尚未注"
-"册的节点添加为发现域的成员。当发起端或目标注册了此节点时，此节点就变成了此域"
-"的一部分</p> <p>当一个 iSCSI 发起端发出域发现请求时，iSNS 服务将返回属于该发"
-"现域的全部 iSCSI 节点目标。</p> "
+#: src/include/isns/helps.rb:46
+msgid "A list of all iSCSI nodes are displayed by discovery domain. Selecting another discovery domain refreshes the list with members from that discovery domain. It is possible to <b>Add</b> an iSCSI node to a discovery domain or <b>Delete</b> the node. <p>Deleting a node removes it from the domain but does not delete the iSCSI node</p> <p>Creating an iSCSI node allows a not yet registered node to be added as a member of the discovery domain. When the initiator or target registers this node then it becomes part of this domain</p> <p>When an iSCSI initiator does a discovery request, the iSNS service returns all iSCSI node targets that are members of the same Discovery Domains.</p> "
+msgstr "发现域显示了全部 iSCSI 节点列表。选择另一个发现域将刷新列表，显示该发现域的成员。可以将一个 iSCSI 节点<b>添加</b>到一个发现域，或从一个发现域<b>删除</b>节点。<p>删除节点会将其从发现域中去除</p><p>创建一个 iSCSI 节点允许将一个尚未注册的节点添加为发现域的成员。当发起端或目标注册了此节点时，此节点就变成了此域的一部分</p> <p>当一个 iSCSI 发起端发出域发现请求时，iSNS 服务将返回属于该发现域的全部 iSCSI 节点目标。</p> "
-#. dds table dialog
-#: src/include/isns/helps.rb:50
-msgid ""
-"At the top a list of all Discovery Domain Sets are displayed. Discovery "
-"Domains belong to Discovery Domain Sets. <p>A Discovery Domain must be a "
-"member of a Discovery Domain Set in order to be active. </p><p>In an iSNS "
-"database, a Discovery Domain Set contains Discovery Domains and Discovery "
-"Domains contain iSCSI Node members.</p>"
-msgstr ""
-"列表顶部会显示全部发现域集。发现域属于发现域集。<p>一个发现域必须是一个发现域"
-"集的成员才能处于活动状态。</p><p>在 iSNS 数据库中，一个发现域集包含多个发现"
-"域，而一个发现域包含多个 iSCSI 节点成员。</p>"
+#. dds table dialog
+#: src/include/isns/helps.rb:50
+msgid "At the top a list of all Discovery Domain Sets are displayed. Discovery Domains belong to Discovery Domain Sets. <p>A Discovery Domain must be a member of a Discovery Domain Set in order to be active. </p><p>In an iSNS database, a Discovery Domain Set contains Discovery Domains and Discovery Domains contain iSCSI Node members.</p>"
+msgstr "列表顶部会显示全部发现域集。发现域属于发现域集。<p>一个发现域必须是一个发现域集的成员才能处于活动状态。</p><p>在 iSNS 数据库中，一个发现域集包含多个发现域，而一个发现域包含多个 iSCSI 节点成员。</p>"
-#: src/include/isns/helps.rb:53
-msgid ""
-"<p>The discovery domain set members list is refreshed whenever a different "
-"discovery domain set is selected.</p>"
+#: src/include/isns/helps.rb:53
+msgid "<p>The discovery domain set members list is refreshed whenever a different discovery domain set is selected.</p>"
msgstr "<p>每当您选择不同的发现域集时，发现域集成员列表便会刷新。</p>"
-#. **************** global funcions and variables *****
-#: src/include/isns/widgets.rb:25
+#. **************** global funcions and variables *****
+#: src/include/isns/widgets.rb:25
msgid "Create New Discovery Domain"
msgstr "创建新的发现域"
-#: src/include/isns/widgets.rb:102
+#: src/include/isns/widgets.rb:102
msgid "Add iSCSI node to discovery domain"
msgstr "将 iSCSI 节点添加到发现域"
-#: src/include/isns/widgets.rb:105
+#: src/include/isns/widgets.rb:105
msgid "Available Nodes to Add"
msgstr "要添加的可用节点"
-#: src/include/isns/widgets.rb:108
+#: src/include/isns/widgets.rb:108
msgid "Name"
msgstr "名称"
-#: src/include/isns/widgets.rb:112
+#: src/include/isns/widgets.rb:112
msgid "Add Node"
msgstr "添加节点"
-#: src/include/isns/widgets.rb:113
+#: src/include/isns/widgets.rb:113
msgid "Done"
msgstr "完毕"
-#: src/include/isns/widgets.rb:145 src/include/isns/widgets.rb:168
+#: src/include/isns/widgets.rb:145 src/include/isns/widgets.rb:168
msgid "Target or Initiator"
msgstr "目标或发起端"
-#: src/include/isns/widgets.rb:241
+#: src/include/isns/widgets.rb:241
msgid "Really delete the selected item?"
msgstr "确实要删除所选的项吗？"
-#: src/include/isns/widgets.rb:270
+#: src/include/isns/widgets.rb:270
msgid "Really delete this domain?"
msgstr "确实要删除此域吗？"
-#. boolean display = true;
-#. Report::DisplayErrors(display,10);
-#: src/include/isns/widgets.rb:351
+#. boolean display = true;
+#. Report::DisplayErrors(display,10);
+#: src/include/isns/widgets.rb:351
msgid "Unable to connect to iSNS server. Check if iSNS server is running."
msgstr "无法连接到 iSNS 服务器。请检查 iSNS 服务器是否正在运行。"
-#. Initialization dialog caption
-#: src/include/isns/wizards.rb:70
+#. Initialization dialog caption
+#: src/include/isns/wizards.rb:70
msgid "isns Daemon Configuration"
msgstr "iSNS 守护程序配置"
-#. Initialization dialog contents
-#: src/include/isns/wizards.rb:72
+#. Initialization dialog contents
+#: src/include/isns/wizards.rb:72
msgid "Initializing..."
msgstr "正在初始化..."
-#. test if required package ("open-isns") is installed
-#: src/modules/IsnsServer.rb:149
-msgid ""
-"<p>To configure the isns service, the <b>%1</b> package must be installed."
+#. test if required package ("open-isns") is installed
+#: src/modules/IsnsServer.rb:149
+msgid "<p>To configure the isns service, the <b>%1</b> package must be installed.</p>"
msgstr "<p>要配置 ISNS 服务，必须安装 <b>%1</b> 包。</p>"
-#: src/modules/IsnsServer.rb:152
+#: src/modules/IsnsServer.rb:152
msgid "<p>Install it now?</p>"
msgstr "<p>是否立即安装？</p>"
-#. IsnsServer read dialog caption
-#: src/modules/IsnsServer.rb:277
+#. IsnsServer read dialog caption
+#: src/modules/IsnsServer.rb:277
msgid "Initializing isns daemon configuration"
msgstr "正在初始化 isns 守护程序配置"
-#. IsnsServer write dialog caption
-#: src/modules/IsnsServer.rb:300
+#. IsnsServer write dialog caption
+#: src/modules/IsnsServer.rb:300
msgid "Saving isns Configuration"
msgstr "正在保存 isns 配置"
Modified: branches/SLE12-SP2/yast/zh_CN/po/journal.zh_CN.po
===================================================================
--- branches/SLE12-SP2/yast/zh_CN/po/journal.zh_CN.po 2016-09-15 14:04:11 UTC (rev 96924)
+++ branches/SLE12-SP2/yast/zh_CN/po/journal.zh_CN.po 2016-09-15 14:54:06 UTC (rev 96925)
@@ -14,118 +14,118 @@
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
-#. Header
-#: src/lib/systemd_journal/entries_dialog.rb:43
+#. Header
+#: src/lib/systemd_journal/entries_dialog.rb:43
msgid "Journal entries"
msgstr "日记项"
-#. Filters
-#: src/lib/systemd_journal/entries_dialog.rb:47
+#. Filters
+#: src/lib/systemd_journal/entries_dialog.rb:47
msgid "Displaying entries with the following text"
msgstr "显示包含以下文本的项"
-#. Return the result as an array of Items
-#: src/lib/systemd_journal/entries_dialog.rb:117
+#. Return the result as an array of Items
+#: src/lib/systemd_journal/entries_dialog.rb:117
msgid "Change filter..."
msgstr "更改过滤器..."
-#: src/lib/systemd_journal/entries_dialog.rb:119
+#: src/lib/systemd_journal/entries_dialog.rb:119
msgid "Refresh"
msgstr "刷新"
-#. Header
-#: src/lib/systemd_journal/query_dialog.rb:50
+#. Header
+#: src/lib/systemd_journal/query_dialog.rb:50
msgid "Entries to display"
msgstr "要显示的项"
-#. Interval
-#: src/lib/systemd_journal/query_dialog.rb:53
+#. Interval
+#: src/lib/systemd_journal/query_dialog.rb:53
msgid "Time interval"
msgstr "时间间隔"
-#. Filters
-#: src/lib/systemd_journal/query_dialog.rb:59
+#. Filters
+#: src/lib/systemd_journal/query_dialog.rb:59
msgid "Filters"
msgstr "过滤器"
-#. User readable description of the current filters
-#: src/lib/systemd_journal/query_presenter.rb:65
+#. User readable description of the current filters
+#: src/lib/systemd_journal/query_presenter.rb:65
msgid "With no additional conditions"
msgstr "没有附加条件"
-#. User readable description of the time interval
-#: src/lib/systemd_journal/query_presenter.rb:82
+#. User readable description of the time interval
+#: src/lib/systemd_journal/query_presenter.rb:82
msgid "Since system's boot"
msgstr "自系统引导以来"
-#: src/lib/systemd_journal/query_presenter.rb:84
+#: src/lib/systemd_journal/query_presenter.rb:84
msgid "From previous boot"
msgstr "从上次引导"
-#: src/lib/systemd_journal/query_presenter.rb:90
+#: src/lib/systemd_journal/query_presenter.rb:90
msgid "Between %{since} and %{until}"
msgstr "从 %{since} 到 %{until}"
-#. Possible intervals for a QueryPresenter object to be used in forms
-#.
-#. @return [Array<Hash>] each interval is represented by a hash with two keys
-#. :value and :label
-#: src/lib/systemd_journal/query_presenter.rb:102
+#. Possible intervals for a QueryPresenter object to be used in forms
+#.
+#. @return [Array<Hash>] each interval is represented by a hash with two keys
+#. :value and :label
+#: src/lib/systemd_journal/query_presenter.rb:102
msgid "Between these dates"
msgstr "在这些日期之间"
-#: src/lib/systemd_journal/query_presenter.rb:104
+#: src/lib/systemd_journal/query_presenter.rb:104
msgid "Since system's boot (%s)"
msgstr "自系统引导以来 (%s)"
-#: src/lib/systemd_journal/query_presenter.rb:108
+#: src/lib/systemd_journal/query_presenter.rb:108
msgid "From previous boot (%s)"
msgstr "从上次引导 (%s)"
-#. Possible filters for a QueryPresenter object
-#.
-#. @return [Array<Hash>] for each filter there are 4 possible keys
-#.
-#. * :name name of the filter
-#. * :label short label for the filter
-#. * :form_label label for the widget used to set the filter
-#. * :multiple boolean indicating if an array is a valid value
-#. * :values optional list of valid values
-#: src/lib/systemd_journal/query_presenter.rb:128
+#. Possible filters for a QueryPresenter object
+#.
+#. @return [Array<Hash>] for each filter there are 4 possible keys
+#.
+#. * :name name of the filter
+#. * :label short label for the filter
+#. * :form_label label for the widget used to set the filter
+#. * :multiple boolean indicating if an array is a valid value
+#. * :values optional list of valid values
+#: src/lib/systemd_journal/query_presenter.rb:128
msgid "Units"
msgstr "单员"
-#: src/lib/systemd_journal/query_presenter.rb:129
+#: src/lib/systemd_journal/query_presenter.rb:129
msgid "For these systemd units"
msgstr "对于这些 systemd 单元"
-#: src/lib/systemd_journal/query_presenter.rb:134
+#: src/lib/systemd_journal/query_presenter.rb:134
msgid "Files"
msgstr "文件"
-#: src/lib/systemd_journal/query_presenter.rb:135
+#: src/lib/systemd_journal/query_presenter.rb:135
msgid "For these files (executable or device)"
msgstr "对于这些文件（可执行文件或设备）"
-#: src/lib/systemd_journal/query_presenter.rb:140
+#: src/lib/systemd_journal/query_presenter.rb:140
msgid "Priority"
msgstr "优先级"
-#: src/lib/systemd_journal/query_presenter.rb:141
+#: src/lib/systemd_journal/query_presenter.rb:141
msgid "With at least this priority"
msgstr "至少具有此优先级"
-#. Fields to display for listing the entries
-#.
-#. @return [Array<Hash>] for each column a :label and a :method is provided
-#: src/lib/systemd_journal/query_presenter.rb:164
+#. Fields to display for listing the entries
+#.
+#. @return [Array<Hash>] for each column a :label and a :method is provided
+#: src/lib/systemd_journal/query_presenter.rb:164
msgid "Time"
msgstr "时间"
-#: src/lib/systemd_journal/query_presenter.rb:165
+#: src/lib/systemd_journal/query_presenter.rb:165
msgid "Source"
msgstr "源"
-#: src/lib/systemd_journal/query_presenter.rb:166
+#: src/lib/systemd_journal/query_presenter.rb:166
msgid "Message"
msgstr "讯息"
Added: branches/SLE12-SP2/yast/zh_CN/po/journalctl.zh_CN.po
===================================================================
--- branches/SLE12-SP2/yast/zh_CN/po/journalctl.zh_CN.po (rev 0)
+++ branches/SLE12-SP2/yast/zh_CN/po/journalctl.zh_CN.po 2016-09-15 14:54:06 UTC (rev 96925)
@@ -0,0 +1,142 @@
+# Chinese message file for YaST2 (@memory@)
+# Copyright (C) 2005 SUSE Linux Products GmbH.
+# Copyright (C) 2002 SuSE Linux AG.
+# Copyright (C) 2001 SuSE GmbH.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: YaST (@memory@)\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2016-08-04 14:55+0200\n"
+"PO-Revision-Date: 2004-04-02 10:52+0200\n"
+"Last-Translator: 裴寒牧