Author: minton
Date: 2015-12-07 20:03:34 +0100 (Mon, 07 Dec 2015)
New Revision: 95105
Added:
trunk/yast/fi/po/iplb.fi.po
Log:
Merged iplb.pot for fi
Added: trunk/yast/fi/po/iplb.fi.po
===================================================================
--- trunk/yast/fi/po/iplb.fi.po (rev 0)
+++ trunk/yast/fi/po/iplb.fi.po 2015-12-07 19:03:34 UTC (rev 95105)
@@ -0,0 +1,698 @@
+# Finnish translations for opensuse-i package.
+# Copyright (C) 2015 SuSE Linux Products GmbH, Nuernberg
+# This file is distributed under the same license as the opensuse-i package.
+# Automatically generated, 2015.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: opensuse-i 18n\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2015-08-25 18:36+0200\n"
+"PO-Revision-Date: 2015-08-25 18:36+0200\n"
+"Last-Translator: Automatically generated\n"
+"Language-Team: none\n"
+"Language: fi\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#. Command line help text for the Xiplb module
+#: src/clients/iplb.rb:54
+msgid "Configuration of IPLB"
+msgstr ""
+
+#. Rich text title for Iplb in proposals
+#: src/clients/iplb_proposal.rb:81
+msgid "Iplb"
+msgstr ""
+
+#. Menu title for Iplb in proposals
+#: src/clients/iplb_proposal.rb:83
+msgid "&Iplb"
+msgstr ""
+
+#. encoding: utf-8
+#. ------------------------------------------------------------------------------
+#. Copyright (c) 2006 Novell, Inc. All Rights Reserved.
+#.
+#.
+#. This program is free software; you can redistribute it and/or modify it under
+#. the terms of version 2 of the GNU General Public License as published by the
+#. Free Software Foundation.
+#.
+#. This program is distributed in the hope that it will be useful, but WITHOUT
+#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
+#.
+#. You should have received a copy of the GNU General Public License along with
+#. this program; if not, contact Novell, Inc.
+#.
+#. To contact Novell about this file by physical or electronic mail, you may find
+#. current contact information at www.novell.com.
+#. ------------------------------------------------------------------------------
+#. File: clients/iplb.ycp
+#. Package: Configuration of iplb
+#. Summary: Main file
+#. Authors: Cong Meng \n"
+"<dt>* Virtual server port is 21: ftp\n"
+"</dt><dt>* Virtual server port is 25: smtp\n"
+"</dt><dt>* Virtual server port is 53: dns\n"
+"</dt><dt>* Virtual server port is 80: http\n"
+"</dt><dt>* Virtual server port is 110: pop\n"
+"</dt><dt>* Virtual server port is 119: nntp\n"
+"</dt><dt>* Virtual server port is 143: imap\n"
+"</dt><dt>* Virtual server port is 389: ldap\n"
+"</dt><dt>* Virtual server port is 443: https\n"
+"</dt><dt>* Virtual server port is 993: imaps\n"
+"</dt><dt>* Virtual server port is 995: pops\n"
+"</dt><dt>* Virtual server port is 1521: oracle\n"
+"</dt><dt>* Virtual server port is 1812: radius\n"
+"</dt><dt>* Virtual server port is 3306: mysql\n"
+"</dt><dt>* Virtual server port is 5432: pgsql\n"
+"</dt><dt>* Virtual server port is 5060: sip\n"
+"</dt><dt>* Otherwise: none\n"
+"\n"
+"\n"
+"</dt><dt><b><big>check command</big> = \"</b><i>path to script</i><b>\"</b>\n"
+"<p>This setting is used if checktype is external and is the command to be run to check the status of a real server. It should exit with status 0 if everything\n"
+"is ok, or non-zero otherwise.\n"
+"</p><p>Four parameters are passed to the script:\n"
+"</p></dt><dt>* virtual server ip/firewall mark\n"
+"</dt><dt>* virtual server port\n"
+"</dt><dt>* real server ip\n"
+"</dt><dt>* real server port\n"
+"</dt><dt>Default: /bin/true\n"
+"\n"
+"\n"
+"<p><b><big>check port</big> =</b> <i>n</i>\n"
+"</p><p>Number of port to monitor. Sometimes check port differs from service port.\n"
+"</p><p>Default: port specified for each real server\n"
+"\n"
+"\n"
+"</p><p><b><big>request</big> = \"</b><i>uri to requested object</i><b>\"</b>\n"
+"</p><p>This object will be requested each checkinterval seconds on each real server. The string must be inside quotes. Note that this string may be overridden by\n"
+"an optional per real-server based request-string.\n"
+"</p><p>For a <small>DNS</small> check this should the name of an A record, or the address of a <small>PTR</small> record to look up.\n"
+"</p><p>For a MySQL, Oracle or PostgeSQL check, this should be an <small>SQL</small> query. The data returned is not checked, only that the answer is one or more\n"
+"rows. This is a required setting.\n"
+"</p><p>For a simpletcp check, this string is sent verbatim except any occurances of \n"
+" are replaced with a new line character.\n"
+"\n"
+"\n"
+"</p><p><b><big>receive</big> = \"</b><i>regexp to compare</i><b>\"</b>\n"
+"</p><p>If the requested result contains this <i>regexp to compare</i>, the real server is declared alive. The regexp must be inside quotes. Keep in mind that\n"
+"regexps are not plain strings and that you need to escape the special characters if they should as literals. Note that this regexp may be overridden by an\n"
+"optional per real-server based receive regexp.\n"
+"</p><p>For a <small>DNS</small> check this should be any one the A record's addresses or any one of the <small>PTR</small> record's names.\n"
+"</p><p>For a MySQL check, the receive setting is not used.\n"
+"\n"
+"\n"
+"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD</small></b>\n"
+"</p><p>Sets the <small>HTTP</small> method which should be used to fetch the <small>URI</small> specified in the request-string. <small>GET</small> is the\n"
+"method used by default if the parameter is not set. If <small>HEAD</small> is used, the receive-string should be unset.\n"
+"</p><p>Default: <small>GET</small>\n"
+"\n"
+"\n"
+"</p><p><b><big>virtual host</big> = \"</b><i>hostname</i><b>\"</b>\n"
+"</p><p>Used when using a negotiate check with <small>HTTP</small> or <small>HTTPS</small> . Sets the host header used in the <small>HTTP</small> request. In the\n"
+"case of <small>HTTPS</small> this generally needs to match the common name of the <small>SSL</small> certificate. If not set then the host header will be\n"
+"derived from the request url for the real server if present. As a last resort the <small>IP</small> address of the real server will be used.\n"
+"\n"
+"\n"
+"</p><p><b><big>login</big> = \"</b><i>username</i><b>\"</b>\n"
+"</p><p>For <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , MySQL, Oracle, <small>POP</small> and PostgreSQL, the username used to log in.\n"
+"</p><p>For Radius the passwd is used for the attribute User-Name.\n"
+"</p><p>For <small>SIP</small> , the username is used as both the to and from address for an <small>OPTIONS</small> query.\n"
+"</p><p>Default:\n"
+"</p></dt><dt>* <small>FTP:</small> Anonymous\n"
+"</dt><dt>* MySQL Oracle, and PostgreSQL: Must be specified in the configuration\n"
+"</dt><dt>* <small>SIP:</small> ldirectord@<hostname>, hostname is derived as per the passwd option below.\n"
+"</dt><dt>* Otherwise: empty string, which denotes that case authentication will not be attempted.\n"
+"\n"
+"\n"
+"</dt><dt><b><big>password</big> = \"</b><i>password</i><b>\"</b>\n"
+"<p>Password to use to login to <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , MySQL, Oracle, <small>POP</small> , PostgreSQL and\n"
+"<small>SIP</small> servers.\n"
+"</p><p>For Radius the passwd is used for the attribute User-Password.\n"
+"</p><p>Default:\n"
+"</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>, where hostname is the environment variable <small>HOSTNAME</small> evaluated at run time, or sourced\n"
+"from uname if unset.\n"
+"</dt><dt>* Otherwise: empty string. In the case of <small>LDAP</small> , MySQL, Oracle, and PostgreSQL this means that authentication will not be performed.\n"
+"\n"
+"\n"
+"</dt><dt><b><big>database name</big> = \"</b><i>databasename</i><b>\"</b>\n"
+"<p>Database to use for MySQL, Oracle and PostgreSQL servers, this is the database that the query (set by <b>receive</b> above) will be performed against. This\n"
+"is a required setting.\n"
+"\n"
+"\n"
+"</p><p><b><big>radius secret</big> = \"</b><i>radiussecret</i><b>\"</b>\n"
+"</p><p>Secret to use for Radius servers, this is the secret used to perform an Access-Request with the username (set by <b>login</b> above) and passwd (set by\n"
+"<b>passwd</b> above).\n"
+"</p><p>Default: empty string\n"
+"\n"
+"\n"
+"</p><p><b><big>persistent</big> =</b> <i>n</i>\n"
+"</p><p>Number of seconds for persistent client connections.\n"
+"\n"
+"\n"
+"</p><p><b><big>netmask</big> =</b> <i>w.x.y.z</i>\n"
+"</p><p>Netmask to be used for granularity of persistent client connections.\n"
+"\n"
+"\n"
+"</p><p><b><big>scheduler</big> =</b> <i>scheduler_name</i>\n"
+"</p><p>Scheduler to be used by <small>LVS</small> for loadbalancing. For an information on the available sehedulers please see the <b>ipvsadm</a></b>(8) man page.\n"
+"</p><p>Default: \"wrr\"\n"
+"\n"
+"\n"
+"</p><p><b><big>protocol</big> = tcp</b>|<b>udp</b>|<b>fwm</b>\n"
+"</p><p>Protocol to be used. If the virtual is specified as an <small>IP</small> address and port then it must be one of tcp or udp. If a firewall mark then the\n"
+"protocol must be fwm.\n"
+"</p><p>Default:\n"
+"</p></dt><dt>* Virtual is an <small>IP</small> address and port, and the port is not 53: tcp\n"
+"</dt><dt>* Virtual is an <small>IP</small> address and port, and the port is 53: udp\n"
+"</dt><dt>* Virtual is a firewall mark: fwm\n"
+"</dt></dl>\n"
+"\n"
+"\n"
+"</p><p><b><big>check timeout</big> =</b> <i>n</i>\n"
+"</p><p>Timeout in seconds for connect, external and ping checks. If the timeout is exceeded then the real server is declared dead.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>If undefined then the value of negotiatetimeout is used. negotiatetimeout is also a global value that may be overriden by a per-virtual setting.\n"
+"</p><p>If both checktimeout and negotiatetimeout are unset, the default is used.\n"
+"</p><p>Default: 5 seconds\n"
+"\n"
+"</p><p><b><big>negotiate timeout</big> =</b> <i>n</i>\n"
+"</p><p>Timeout in seconds for negotiate checks.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>If undefined then the value of connecttimeout is used. connecttimeout is also a global value that may be overriden by a per-virtual setting.\n"
+"</p><p>If both negotiatetimeout and connecttimeout are unset, the default is used.\n"
+"</p><p>Default: 30 seconds\n"
+"\n"
+"</p><p><b><big>failure count</big> =</b> <i>n</i>\n"
+"</p><p>The number of consecutive times a failure will have to be reported by a check before the realserver is considered to have failed. A value of 1 will have the realserver considered failed on the first failure. A successful check will reset the failure counter to 0.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>Default: 1\n"
+"\n"
+"</p><p><b><big>email alert</big> = \"</b><i>emailaddress</i><b>\"</b>\n"
+"</p><p>A valid email address for sending alerts about the changed connection status to any real server defined in the virtual service. This option requires perl\n"
+"module MailTools to be installed. Automatically tries to send email using any of the built-in methods. See perldoc Mail::Mailer for more info on methods.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"\n"
+"</p><p><b><big>email alert freq</big> =</b> <i>n</i>\n"
+"</p><p>Delay in seconds between repeating email alerts while any given real server in the virtual service remains inaccessible. A setting of zero seconds will\n"
+"inhibit the repeating alerts. The email timing accuracy of this setting is dependent on the number of seconds defined in the checkinterval configuration\n"
+"option.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>Default: 0\n"
+"\n"
+"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting</b>|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n"
+"</p><p>Comma delimited list of server states in which email alerts should be sent. <b>all</b> is a short-hand for\n"
+"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\". If <b>none</b> is specified, no other option may be specified, otherwise options are ORed\n"
+"with each other.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>Default: all\n"
+"\n"
+"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n"
+"</p><p>the server onto which a webservice is redirected if all real servers are down. Typically this would be 127.0.0.1 with an emergency page.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"\n"
+"</p><p><b><big>quiescent</big> = yes</b>|<b>no</b>\n"
+"</p><p>If <i>yes</i>, then when real or failback servers are determined to be down, they are not actually removed from the kernel's <small>LVS</small> table.\n"
+"Rather, their weight is set to zero which means that no new connections will be accepted.\n"
+"</p><p>This has the side effect, that if the real server has persistent connections, new connections from any existing clients will continue to be routed to the\n"
+"real server, until the persistant timeout can expire. See ipvsadm for more information on persistant connections.\n"
+"</p><p>This side-effect can be avoided by running the following:\n"
+"</p><p>echo 1 > /proc/sys/net/ipv4/vs/expire_quiescent_template\n"
+"</p><p>If the proc file isn't present this probably means that the kernel doesn't have lvs support, <small>LVS</small> support isn't loaded, or the kernel is too\n"
+"old to have the proc file. Running ipvsadm as root should load <small>LVS</small> into the kernel if it is possible.\n"
+"</p><p>If <i>no</i>, then the real or failback servers will be removed from the kernel's <small>LVS</small> table. The default is <i>yes</i>.\n"
+"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>Default: <i>yes</i>\n"
+"\n"
+"\n"
+"\n"
+msgstr ""
+
+#. overwrite global value part
+#: src/include/iplb/vserver_conf.rb:146
+msgid "Check Type"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:150
+msgid "Check Port"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:151
+msgid "Service"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:152
+msgid "Check Command"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:157
+msgid "Http Method"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:160
+msgid "Request"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:162
+msgid "Receive"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:165
+msgid "Virtual Host"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:177
+msgid "Login"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:178
+msgid "Password"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:180
+msgid "Database Name"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:181
+msgid "Radius Secret"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:199
+msgid "Persistent"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:200
+msgid "Netmask"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:202
+msgid "Scheduler"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:211
+msgid "Protocol"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:231
+msgid "Virtual Servers"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:234 src/include/iplb/vserver_conf.rb:301
+msgid "Add"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:235 src/include/iplb/vserver_conf.rb:303
+msgid "Edit"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:236 src/include/iplb/vserver_conf.rb:302
+msgid "Delete"
+msgstr ""
+
+#. disable the delete & edit button if vserver box is empty
+#: src/include/iplb/vserver_conf.rb:296
+msgid "Virtual Server"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:298
+msgid "Real Servers"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:310
+msgid "Check type"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:311
+msgid "Auth type"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:312
+msgid "Others"
+msgstr ""
+
+#. return `cacel or a string
+#: src/include/iplb/vserver_conf.rb:342 src/include/iplb/vserver_conf.rb:427
+msgid "OK"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:343 src/include/iplb/vserver_conf.rb:428
+msgid "Cancel"
+msgstr ""
+
+#. split the real server ip value;
+#: src/include/iplb/vserver_conf.rb:411
+msgid ""
+"If using IPv6,the format should like this\n"
+"[fe80::5054:ff:fe00:2]"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:413
+msgid "Real Server's IP Address"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:419
+msgid "Forward Method"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:422
+msgid "weight"
+msgstr ""
+
+#. find next ]
+#: src/include/iplb/vserver_conf.rb:456
+msgid "IP address is not Valid"
+msgstr ""
+
+#. tab switch events end
+#: src/include/iplb/vserver_conf.rb:547
+msgid "Add a new real server:"
+msgstr ""
+
+#: src/include/iplb/vserver_conf.rb:564
+msgid "Edit the real server:"
+msgstr ""
+
+#. Initialization dialog contents
+#: src/include/iplb/wizards.rb:142
+msgid "Initializing..."
+msgstr ""
+
+#. Read all iplb settings
+#. @return true on success
+#: src/modules/Iplb.rb:214
+msgid "Initializing IPLB Configuration"
+msgstr ""
+
+#. Names of real stages
+#: src/modules/Iplb.rb:221
+msgid "Read the global settings"
+msgstr ""
+
+#: src/modules/Iplb.rb:221
+msgid "Read the virtual host settings"
+msgstr ""
+
+#: src/modules/Iplb.rb:223
+msgid "Reading the global settings..."
+msgstr ""
+
+#: src/modules/Iplb.rb:224
+msgid "Reading the virtual host settings..."
+msgstr ""
+
+#: src/modules/Iplb.rb:225 src/modules/Iplb.rb:330
+msgid "Finished"
+msgstr ""
+
+#. Write all iplb settings
+#. @return true on success
+#: src/modules/Iplb.rb:320
+msgid "Saving IPLB Configuration"
+msgstr ""
+
+#: src/modules/Iplb.rb:326
+msgid "Write the settings"
+msgstr ""
+
+#: src/modules/Iplb.rb:326
+msgid "Run SuSEconfig"
+msgstr ""
+
+#: src/modules/Iplb.rb:328
+msgid "Writing the settings..."
+msgstr ""
+
+#: src/modules/Iplb.rb:329
+msgid "Running SuSEconfig..."
+msgstr ""
+
+#. write global conf
+#. check for ipv6 address to decide whether to add "6=" or "="
+#. string key's format
+#. 192.168.6.241:89 or [2001:db8::5]:119
+#. only extract the 2001:db8::5 part from the key string
+#. to check whether it is an ipv6 address;
+#: src/modules/Iplb.rb:355 src/modules/Iplb.rb:392 src/modules/Iplb.rb:405
+msgid "Cannot write settings."
+msgstr ""
+
+#. TODO FIXME: your code here...
+#. Configuration summary text for autoyast
+#: src/modules/Iplb.rb:441
+msgid "Configuration summary..."
+msgstr ""