Hi, I have updated my 9.1 with a new Kernel. (2.6.5-7.111-default to 2.6.5-7.151-default). After reebot there was only one Network Interface avaliable. Setting up network interfaces: lo lo IP address: 127.0.0.1/8 doneWaiting for mandatory devices: eth-id-00:e0:81:62:29:19 eth-id-00:e0:81:62:29:1a 19 eth1 device: Intel Corp. 82801BD PRO/100 VE (LOM) Ethernet Controller (rev 82) eth1 configuration: eth-id-00:e0:81:62:29:1a eth1 IP address: 213.203.202.82/24 doneWaiting for mandatory devices: eth-id-00:e0:81:62:29:19 18 17 16 13 12 11 10 9 7 6 5 4 3 2 1 0 eth0 interface could not be set up failedSetting up service network . . . . . . . . . . . . . . . .failed In Yast both Interfaces are avaliable. But originaly eth0 was the RPO/100 Card and the Intel e1000 was eth1. So the routing table is false. Some Applications i.e. Confixx dosent also like that (because of eth0 <-> eth1 change). Can anybody help me. Can I go back to 2.6.5-7.111-default ? Please let me know if you need further Information. Thanks Hans