Hi I have a connection problem, when running Firewall2. I have the Suse 7.2 distribution. I updated to Kernel 2.4.16. I then dl Firewall2 as rpm from the Suse site and installed it. After that I deinstalled Firewall1 and Personal Firewall. Since I could not get a connection with the T-DSL line I unloaded Firewall2 and let Firewall2 run in test mode. With a primitive IPTables script (mainly ipforwarding and masquerading) i started the pppoed again and I get the following message from the /var/log/firewall. Mar 27 13:32:39 linux kernel: SuSE-FW-UNALLOWED-TARGET IN=ppp0 OUT= MAC= SRC=62.41.113.136 DST=217.1.132.119 LEN=52 TOS=0x08 PREC=0x00 TTL=52 ID=19021 DF PROTO=TCP SPT=80 DPT=1081 WINDOW=31900 RES=0x00 ACK URGP=0 OPT (0101080A032AB4AF00024C5E Actually, the above is all in one line. I include my firewall2 config file below, where i basically tried to allow everything. Thank you for any help Thomas firewall2-configuration file: 2 network cards on Linux router. local net is 192.168.10.xx FW_DEV_EXT="ppp0 eth0" FW_DEV_INT="eth1" FW_DEV_DMZ="" FW_ROUTE="yes" FW_MASQUERADE="yes" FW_MASQ_DEV="$FW_DEV_EXT" FW_MASQ_NETS="192.168.10.0/24,0/0,tcp,1:65535 \ 192.168.10.0/24,0/0,udp,1:65535" FW_PROTECT_FROM_INTERNAL="no" FW_AUTOPROTECT_SERVICES="no" FW_SERVICES_EXT_TCP="1:65535" # Common: smtp domain FW_SERVICES_EXT_UDP="1:65535" # Common: domain FW_SERVICES_EXT_IP="" # For VPN/Routing which END at the firewall!! # FW_SERVICES_DMZ_TCP="" # Common: smtp domain FW_SERVICES_DMZ_UDP="" # Common: domain FW_SERVICES_DMZ_IP="" # For VPN/Routing which END at the firewall!! # FW_SERVICES_INT_TCP="1:65535" #Common: ssh smtp domain FW_SERVICES_INT_UDP="1:65535" #Common: domain syslog FW_SERVICES_INT_IP="" # For VPN/Routing which END at the firewall!! FW_TRUSTED_NETS="" FW_ALLOW_INCOMING_HIGHPORTS_TCP="yes" FW_ALLOW_INCOMING_HIGHPORTS_UDP="yes" FW_SERVICE_AUTODETECT="yes" # Autodetect the services below when starting FW_SERVICE_DNS="no" FW_SERVICE_DHCLIENT="no" FW_SERVICE_DHCPD="no" FW_SERVICE_SQUID="no" FW_SERVICE_SAMBA="no" FW_FORWARD="0/0,0/0,tcp,1:65535 0/0,0/0,udp,1:65535" FW_FORWARD_MASQ="" FW_REDIRECT="" FW_LOG_DROP_CRIT="yes" FW_LOG_DROP_ALL="no" FW_LOG_ACCEPT_CRIT="yes" FW_LOG_ACCEPT_ALL="no" FW_LOG="--log-level warning --log-tcp-options --log-ip-option --log-prefix SuSE-FW" FW_KERNEL_SECURITY="yes" FW_STOP_KEEP_ROUTING_STATE="yes" FW_ALLOW_PING_FW="yes" FW_ALLOW_PING_DMZ="no" FW_ALLOW_PING_EXT="no" FW_ALLOW_PING_INTERNET="yes" ## # END of rc.firewall ## # # #-------------------------------------------------------------------------# # # # EXPERT OPTIONS - all others please don't change these! # # # #-------------------------------------------------------------------------# # # FW_ALLOW_FW_TRACEROUTE="yes" FW_ALLOW_FW_SOURCEQUENCH="yes" FW_ALLOW_FW_BROADCAST="no" FW_IGNORE_FW_BROADCAST="yes" FW_ALLOW_CLASS_ROUTING="yes" # # 25.) # Do you want to load customary rules from a file? # # This is really an expert option. NO HELP WILL BE GIVEN FOR THIS! # READ THE EXAMPLE CUSTOMARY FILE AT /etc/rc.config.d/firewall2-custom.rc.config # #FW_CUSTOMRULES="/etc/rc.config.d/firewall2-custom.rc.config" __________________________________________________ Do You Yahoo!? Yahoo! Movies - coverage of the 74th Academy Awards� http://movies.yahoo.com/