Ich kann bei o. g. Kamerea keine Bilder einlesen, weder in digikam nocht mit gphoto. Bei meiner vorigen Suse-Version (10.2) wurden die Bilder eingelesen und auch ein Verzeichnis mit der SD-Karte angelegt. die Ausgabe von dmesg | grep usb bringt folgendes: usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd usb usb1: SerialNumber: 0000:00:10.0 usb usb1: configuration #1 chosen from 1 choice usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd usb usb2: SerialNumber: 0000:00:10.1 usb usb2: configuration #1 chosen from 1 choice usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.22.13-0.3-default ehci_hcd usb usb3: SerialNumber: 0000:00:10.4 usb usb3: configuration #1 chosen from 1 choice usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd usb usb4: SerialNumber: 0000:00:10.2 usb usb4: configuration #1 chosen from 1 choice usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.22.13-0.3-default uhci_hcd usb usb5: SerialNumber: 0000:00:10.3 usb usb5: configuration #1 chosen from 1 choice usb 3-5: new high speed USB device using ehci_hcd and address 2 usb 3-5: new device found, idVendor=0409, idProduct=005a usb 3-5: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-5: configuration #1 chosen from 1 choice usb 3-5.4: new high speed USB device using ehci_hcd and address 3 usb 3-5.4: new device found, idVendor=058f, idProduct=6362 usb 3-5.4: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-5.4: Product: Mass Storage Device usb 3-5.4: Manufacturer: Generic usb 3-5.4: SerialNumber: 058F312D81B usb 3-5.4: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete usb 3-5.4: reset high speed USB device using ehci_hcd and address 3 usb 3-5.4: reset high speed USB device using ehci_hcd and address 3 usb 3-5.4: reset high speed USB device using ehci_hcd and address 3 usb 3-5.4: reset high speed USB device using ehci_hcd and address 3 usb 3-5.4: reset high speed USB device using ehci_hcd and address 3 usb 3-5.4: reset high speed USB device using ehci_hcd and address 3 usb 3-5.4: reset high speed USB device using ehci_hcd and address 3 usb 3-5.4: reset high speed USB device using ehci_hcd and address 3 usb 3-5.4: reset high speed USB device using ehci_hcd and address 3 usb 3-5.4: reset high speed USB device using ehci_hcd and address 3 usb 3-5.4: reset high speed USB device using ehci_hcd and address 3 usb 3-5.4: reset high speed USB device using ehci_hcd and address 3 usb 3-5.4: reset high speed USB device using ehci_hcd and address 3 usb 1-1: new full speed USB device using uhci_hcd and address 2 usb 1-1: new device found, idVendor=05ca, idProduct=2212 usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: Caplio R1V usb 1-1: Manufacturer: Ricoh Company Ltd. usb 1-1: configuration #2 chosen from 2 choices lsmod | grep usb usb_storage 102816 0 ide_core 165648 1 usb_storage usbcore 155816 4 usb_storage,ehci_hcd,uhci_hcd scsi_mod 176536 5 usb_storage,sr_mod,sg,sd_mod,libata lsusb Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 003: ID 058f:6362 Alcor Micro Corp. Bus 003 Device 002: ID 0409:005a NEC Corp. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 005: ID 05ca:2212 Ricoh Co., Ltd Caplio R1v Camera Bus 001 Device 001: ID 0000:0000 lsscsi: [2:0:0:0] disk ATA WDC WD800BB-55HE 13.0 /dev/sda [2:0:1:0] disk ATA ST3200822A 3.01 /dev/sdb [3:0:0:0] cd/dvd BENQ DVD DD DW1640 BSRB /dev/sr0 [4:0:0:0] disk Generic USB SD Reader 1.00 /dev/sdc [4:0:0:1] disk Generic USB CF Reader 1.01 /dev/sdd [4:0:0:2] disk Generic USB SM Reader 1.02 /dev/sde [4:0:0:3] disk Generic USB MS Reader 1.03 /dev/sdf Ich habe schon auf KDE 3.5.8 umgestellt und auch auf die neueste Version von digikam upgedatet.. gphoto2 --auto-detect bringt diese Meldung: Modell Port ---------------------------------------------------------- Ricoh Caplio R1v usb: Ricoh Caplio R1v usb:001,005 und lsusb -v bringt für die Kamera: Bus 001 Device 005: ID 05ca:2212 Ricoh Co., Ltd Caplio R1v Camera Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x05ca Ricoh Co., Ltd idProduct 0x2212 Caplio R1v Camera bcdDevice 0.00 iManufacturer 1 Ricoh Company Ltd. iProduct 2 Caplio R1V iSerial 0 bNumConfigurations 2 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 2 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 6 Imaging bInterfaceSubClass 1 Still Image Capture bInterfaceProtocol 1 Picture Transfer Protocol (PIMA 15470) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 20 Device Status: 0x0001 Self Powered Es wird kein Verzeichnis unter /media angelegt. Beim lsscsi ist die Kamera gar nicht aufgeführt. Das einlesen klappt sowohl bei meinem AMD64 Rechner sowie bei dem 32-bit Rechner nicht. Weiss jemand Hilfe? Danke Michael --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org