Hallo Liste Ich habe ein eine ganz frische Suse 10.0 installiert (hatte vorher 9.2) und mein Scanner -Epson Perfection 2450 Photo- ärgert mich blau. Der Scanner wird problemlos erkannt (sowohl Yast, als auch scanimage -L): jenbee@jeb3:~> scanimage -L device `epson:libusb:003:004' is a Epson GT-9700 flatbed scanner Das Scannen klappt trotzdem nicht. Wenn ich scanimage -T mit einem hohen Debuglevel aufrufe, erhalte ich die angehangene Textausgabe, von der die letzten 20 Zeilen (die Zeilen bis zum Fehler) wie dargestellt aussehen. Kann man daraus den Fehler (besser die Problemlösung) erkennen? Vielen Dank ----schnipp------ [epson] sane_init, ># For libusb support for unknown scanners use the following command< [epson] sane_init, ># usb <product ID> <device ID>< [epson] sane_init, ># e.g.:< [epson] sane_init, ># usb 0x4b8 0x110< [epson] sane_init, ># And for the scanner module, use the following configuration:< [epson] sane_init, >#usb /dev/usbscanner0< [epson] sane_init, >#usb /dev/usb/scanner0< [epson] sane_get_devices() [epson] sane_open(libusb:003:004) [epson] init_options() [epson] open_scanner() [epson] setvalue(option = 38, value = 0xbfa27950) [epson] set = 215.899994 [epson] setvalue(option = 39, value = 0xbfa27950) [epson] set = 297.179993 [epson] sane_start() [epson] open_scanner() [epson] scanner is already open: fd = 0 [epson] send buf, size = 2 [epson] buf[0] 1b . [epson] buf[1] 65 e [epson] w_cmd_count = 9 [epson] r_cmd_count = 14 [epson] w_cmd_count = 9 [epson] r_cmd_count = 14 [epson] receive buf, expected = 1, got = 0 [epson] You may have to power off your TPU [epson] Also you may have to restart the Sane frontend. [epson] close_scanner(fd = 0) [epson] w_cmd_count = 9 [epson] r_cmd_count = 14 [epson] send buf, size = 2 [epson] buf[0] 1b . [epson] buf[1] 66 f [epson] w_cmd_count = 10 [epson] r_cmd_count = 14 [epson] w_cmd_count = 10 [epson] r_cmd_count = 15 [epson] receive buf, expected = 4, got = 1 [epson] buf[0] 15 . [epson] code 15 [epson] option: fatal error [epson] ADF: other error [epson] ADF: no paper [epson] w_cmd_count = 10 [epson] r_cmd_count = 15 scanimage: sane_start: Error during device I/O