The default config from install for this card is not working
during install the ifcfg-wlan0 have other params than given.
So with Yast i made a new configuration for the card
giving the mac adress for the AP it has to connect to
No power management
Finish yast and .................... INTERNET
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Its working as it always has.
Big thanks for helping me.
iwconfig output gave me the way where to to look and what to do.
Once again big thanks for helping me
2009/11/16 Jiri Benc
On Mon, 16 Nov 2009 13:13:21 -0400, rob koendering wrote:
Made a report in bugzilla couldnot find it afterwards you know the problem here as attachment the dmesg + lspci in 1 file
There is a "My Reports" link at the bottom part of the page when you log in to bugzilla.
When you find your report, please attach the output of lspci -nn (note the "-nn").
If you don't see your report, something got wrong and you'll need to fill it again.
Also, from the dmesg you sent the rt61pci driver loads correctly. To be able to further debug the problem, also attach the output of the following commands: ifconfig -a iwconfig
Let's continue in the bugzilla, this list is not the correct place to do debugging.
Jiri
-- Jiri Benc SUSE Labs
-- Robert Koendering Willemstad Curacao -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-kernel+help@opensuse.org