Guten Tag Karsten Keil, Am Montag, 31. Mai 2004 um 18:39 schrieb Karsten Keil:
On Sun, May 30, 2004 at 09:19:31PM +0200, Stefan Schilling wrote:
Guten Tag Stefan Schilling,
mISDN ist nicht Fax fähig.
schade.
Wenn Du faxen willst, kannst Du derzeit nur die binonly AVM Treiber nutzen.
ok, wie mach ich das? Ich habe mir den fcpci-Treiber von AVM (fcpci-suse9.1-3.11-02.tar.gz) geladen, entpackt und dann in /tmp/fritz "make" + "make install" + "depmod" aufgerufen. Zudem habe ich die /etc/init.d/i4l_hardware so verändert, dass da nun steht: ######################################################### # AVM-B1 / AVM Capi Driver ######################################################### if test ! -z "$AVM_IDX" ; then CONTR=1 echo "Loading CAPI4Linux AVM-Driver ..." /usr/sbin/capiinit start echo "Loading bridge for ISDN4Linux ..." modprobe -v fcpci if test $? -ne 0; then echo "" echo "Loading of bridge for ISDN4Linux failed!" echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" echo "Check /var/log/messages and /var/log/warn." echo "You will not be able to use applications using" echo "ISDN4Linux until loading is successful." echo "Also ISDNlog won't be started." echo "" ISDNLOG_START="no" LOAD_OK="yes" else LOAD_OK="yes" fi # To recover the original file "i4l_hardware", please # take a look into "i4l_hardware.old"! fi (das habe ich vom i4l_hardware Startskript von thepenguin.de) in der /var/log/messages steht dann: Jun 1 17:01:42 debian kernel: fcpci: module license 'Proprietary' taints kernel. Jun 1 17:01:42 debian kernel: fcpci: AVM FRITZ!Card PCI driver, revision 0.6.1 Jun 1 17:01:42 debian kernel: fcpci: (fcpci built on Jun 1 2004 at 16:35:49) Jun 1 17:01:42 debian kernel: PCI: Found IRQ 12 for device 0000:00:0b.0 Jun 1 17:01:42 debian kernel: PCI: Sharing IRQ 12 with 0000:00:02.1 Jun 1 17:01:42 debian kernel: fcpci: AVM FRITZ!Card PCI found: port 0xc400, irq 12 Jun 1 17:01:42 debian kernel: fcpci: Loading... Jun 1 17:01:42 debian kernel: fcpci: Driver 'fcpci' attached to stack. (152) Jun 1 17:01:42 debian kernel: fcpci: Stack version 3.11-02 Jun 1 17:01:42 debian kernel: kcapi: Controller 1: fcpci-c400-12 attached Jun 1 17:01:42 debian kernel: kcapi: card 1 "fcpci-c400-12" ready. Jun 1 17:01:42 debian kernel: fcpci: Loaded. Jun 1 17:01:42 debian isdnlog: isdnlog: Can't open /dev/isdnctrl0 (No such device or address) Jun 1 17:01:42 debian isdnlog: isdnlog Version 4.29 exiting Jun 1 17:01:42 debian isdnlog: exit now 2 es scheint, als würde er auch diesmal das isdnlog nicht richtig gestartet bekommen (wenigstens -scheint er- nicht beim Anruf abzustürzen...). Wie bekomme ich´s hin, dass er nun auch noch das /dev/isdnctrl0 kennt? Muss ich irgendwas anders machen? Ich mach´s gerne, nur sagen müßt ihr´s mir... NACHTRAG: ein manuelles Versenden eines Faxes funzt mit folgenden Befehlen (auf zwei Konsolen): Konsole 1: root@debian:/tmp/capi4hylafax-01.02.02 > /usr/local/bin/c2faxrecv -v Started in Hylafax mode and waiting on incoming calls. SESSION BEGIN 00000062 +49.xx.xxx Incoming analog call on controller 1 from xxxxx to xxx. Connection established. StationID = +49 xx xxx BaudRate = 64000 Flags = HighRes, MMR_compr Write fax in path /var/spool/hylafax to file recvq/fax00011.tif. Page 1 was received. - Last Page! Fax received and calling '/var/spool/hylafax/bin/faxrcvd "recvq/fax00011.tif" "faxCAPI" "00000062" "" "+49 xx xxx" "" "xxx"'. Connection is droped with reason 0x3400 (No additional information). SESSION END root@debian:/tmp/capi4hylafax-01.02.02 > Konsole 2: root@debian:/var/spool/fax/etc > /usr/local/bin/c2faxsend -f TIFF -d xxx -v /fritz.tif Try to connect to fax number xxx in TIFF mode on controller 1. Dial and starting transfer of TIFF-File /fritz.tif with fine resolution. Connection established. StationID = +49 xx xxx BaudRate = 64000 Flags = HighRes, MR_compr, MMR_compr Page 1 was sended. - Last Page! Fax file completely transfered to CAPI. Connection dropped with Reason 0x3400 (No additional information). root@debian:/var/spool/fax/etc > Jetzt fehlt also nur noch, dass auch das isdnlog arbeitet... was fehlt dazu? Ciao! Stefan -- Mit freundlichen Grüssen Stefan Schilling mailto:mail.suse@gmx.de