hallo, folgendes problem: ich habe eine dial on demand verbindung mit yast eingerichtet. provider: t-online modem: fritz card dsl 2.0 alles funktioniert gut, nur nach einigen tagen bricht die verbindung mit folgender meldung ab. /var/log/messages Jan 15 16:12:22 linux kernel: kcapi: appl 2 ncci 0x10102 down Jan 15 16:12:22 linux pppd[1561]: Hangup (SIGHUP) Jan 15 16:12:22 linux pppd[1561]: capiplugin: disconnect(remote): "" -> "" outgoing 0x0000 (0x3316) - No additional information Jan 15 16:12:22 linux pppd[1561]: Modem hangup Jan 15 16:12:22 linux pppd[1561]: capiplugin: phase network (was running). Jan 15 16:12:22 linux pppd[1561]: capiplugin: phase terminate (was network) . Jan 15 16:12:22 linux pppd[1561]: capiplugin: phase dead (was terminate). Jan 15 16:12:22 linux pppd[1561]: Connection terminated. Jan 15 16:12:22 linux pppd[1561]: Connect time 1038.6 minutes. Jan 15 16:12:22 linux pppd[1561]: Sent 147168918 bytes, received 843446708 bytes. Jan 15 16:12:22 linux pppd[1561]: capiplugin: phase disconnect (was dead). Jan 15 16:12:22 linux pppd[1561]: capiplugin: phase holdoff (was disconnect). Jan 15 16:12:22 linux pppd[9074]: Can't execute /etc/ppp/ip-down: Exec format error Jan 15 16:12:22 linux pppd[1561]: Script /etc/ppp/ip-down finished (pid 9074), status = 0xff00 Jan 15 16:12:52 linux pppd[1561]: capiplugin: phase dormant (was holdoff). Jan 15 16:12:52 linux pppd[1561]: capiplugin: phase dormant, again. Jan 15 16:12:54 linux pppd[1561]: Starting link Jan 15 16:12:54 linux pppd[1561]: capiplugin: phase serialconn (was dormant). Jan 15 16:12:54 linux pppd[1561]: capiplugin: leased line (adslpppoe) Jan 15 16:12:54 linux kernel: kcapi: appl 2 ncci 0x10102 up Jan 15 16:12:58 linux kernel: kcapi: appl 2 ncci 0x10102 down Jan 15 16:12:58 linux pppd[1561]: capiplugin: disconnect(remote): "" -> "" outgoing 0x0000 (0x3312) - No additional information Jan 15 16:13:03 linux pppd[1561]: capiplugin: leased line (adslpppoe) Jan 15 16:13:03 linux kernel: kcapi: appl 2 ncci 0x10102 up Jan 15 16:13:06 linux kernel: kcapi: appl 2 ncci 0x10102 down Jan 15 16:13:06 linux pppd[1561]: capiplugin: disconnect(remote): "" -> "" outgoing 0x0000 (0x3312) - No additional information Jan 15 16:13:11 linux pppd[1561]: capiplugin: leased line (adslpppoe) Jan 15 16:13:11 linux kernel: kcapi: appl 2 ncci 0x10102 up Jan 15 16:13:15 linux kernel: kcapi: appl 2 ncci 0x10102 down Jan 15 16:13:15 linux pppd[1561]: capiplugin: disconnect(remote): "" -> "" outgoing 0x0000 (0x3312) - No additional information Jan 15 16:13:20 linux pppd[1561]: capiplugin: leased line (adslpppoe) Jan 15 16:13:20 linux kernel: kcapi: appl 2 ncci 0x10102 up Jan 15 16:13:23 linux kernel: kcapi: appl 2 ncci 0x10102 down Jan 15 16:13:23 linux pppd[1561]: capiplugin: disconnect(remote): "" -> "" outgoing 0x0000 (0x3312) - No additional information Jan 15 16:13:23 linux pppd[1561]: capiplugin: couldn't make connection Jan 15 16:13:23 linux pppd[1561]: restoring old default route to eth0 [10.0.0.1] Jan 15 16:13:23 linux pppd[1561]: capiplugin: exit Jan 15 16:13:23 linux pppd[1561]: Exit. Jan 15 16:13:23 linux kernel: kcapi: appl 2 down Jan 15 16:13:24 linux modify_resolvconf: restored /etc/resolv.conf.saved.by.smpppd to /etc/resolv.conf dieses problem wird hier in der liste nicht das erste mal geschildert. es hat einmal jemand etwas von einer störung in der leitung gesagt. das hat mich an meinen alten win2k server erinnert. da ist nach einigen tagen die verbindung mit der fehlermeldung "zeitüberschreitung" abgebrochen. ich habe daraufhin avm kontaktiert. mir wurde gesagt, dass die telekom absichtlich störungen in die leitungen "einbaut" was dazu führt, dass der damalige win2k server neu gestartet werden musste, da die fritz card neu syncronisiert (oder initialisiert??) werden muss. das hat mich allerdings etwas verärgert. frage: gibt es eine möglichkeit die fritz card dsl 2 auf einem suse9 system via bash befehl neu zu initialieren? danke im voraus, Martin Marx