Liebe Liste, bei dem Versuch, einen Einwahlserver zu konfigurieren habe ich folgendes Problem: in der /etc/inittab stehen folgende Einträge: p0:235:respawn:/usr/sbin/pppd call isdn/in-hdlc-noncli >> /var/log/dialin_hdlc p1:235:respawn:/usr/sbin/pppd call isdn/in-v110-noncli >> /var/log/dialin_v110 Die "in-hdlc-noncli" und "in-v110-noncli" sind fast identisch: --- gemeinsam --- auth lock lcp-echo-interval 30 lcp-echo-failure 4 lcp-max-configure 60 lcp-restart 2 noipx proxyarp noipdefault nodefaultroute login +pap plugin userpass.so plugin capiplugin.so netmask 255.255.255.0 ms-dns <ip-dns> ms-wins <ip-server> <ip-server>:<ip-client> inmsn <msn> --- hdlc --- sync protocol hdlc --- v110 --- protocol v110async --- ENDE ---- Eine Einwahl über hdlc funkt. problemlos Eine Einwahl über v110 klappt nicht... folgende Message: --- schnipp --- Plugin userpass.so loaded. userpass: $Revision: 1.3 $ Plugin capiplugin.so loaded. capiplugin: $Revision: 1.24 $ capiconn: 1.5 capiplugin: phase serialconn. capiplugin: contr=1 controller 1: listen_change_state 0 -> 1 contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0x0 capimask2=0x0 controller 1: listen_change_state 1 -> 0 controller 1: listen_change_state 0 -> 1 capiplugin: waiting for incoming call ... contr 1: listenconf Info=0x0000 (No additional information) infomask=0x144 cipmask=0xc capimask2=0x0 controller 1: listen_change_state 1 -> 2 plci_change_state:0x101 0 -> 4 event=5 incoming call contr=1 cip=2 NR-CLIENT -> MSN-SERVER capiplugin: incoming call: "NR-CLIENT" -> "MSN_SERVER" incoming (pcli=0x101/ncci=0x0) (0x2) capiplugin: ignoring digital call from NR-CLIENT plci_change_state:0x101 4 -> 6 event=12 plci_change_state:0x101 6 -> 8 event=9 plci_change_state:0x101 8 -> 0 event=11 plci_change_state:0x101 0 -> 4 event=5 incoming call contr=1 cip=2 NR-CLIENT -> MSN-SERVER capiplugin: incoming call: "NR-CLIENT" -> "MSN_SERVER" incoming (pcli=0x101/ncci=0x0) (0x2) capiplugin: ignoring digital call from NR-CLIENT plci_change_state:0x101 4 -> 6 event=12 plci_change_state:0x101 6 -> 8 event=9 plci_change_state:0x101 8 -> 0 event=11 --- schnapp --- Was ist falsch? Wenn ich die inittab auf ttyI0 konfiguriere klappt auch die v110 Einwahl. Gruß, Arne