2011-07-05 14:48 keltezéssel, Oldtimer írta:
Szia(sztok)!
Ezzel kapcsolatban még talán annyit: Opensuse 11.3-al megy? Mert ha igen, akkor én ilyenkor azt szoktam, ha mód van rá, hogy egy Live CD-re bootolok és ha azon megy a "dolog", akkor megpróbálom lemásolni a beállításokat. Vagy pedig rákeresni, hogy mely programocsmagok kezelik a scannert és "downgraedelni" a csomagokat, nem az oprendszert. Ha az oSS11.1-hez készült KDE3 csomagok mennek a 11.3-assal (én így használom), akkor a scannerhez kellő programoknak is kell menni.
Ez nem jött össze :( 11.3 kiadásával meg de annyi szöszmösz van már a 11.4re beállítva, hogy emiatt nem downgraedelnék. Megpróbálnám összekalapálni a yast nélkül. Ehhez viszont kérnék segítséget töletek. ___________________________________________________________________________________________ Az infók: openSUSE 11.4 lsusb:Bus 002 Device 002: ID 03f0:1405 Hewlett-Packard ScanJet 3670 sane-find-scanner: found USB scanner (vendor=0x03f0, product=0x1405, chip=GL646_HP?) at libusb:002:002 scanimage -L scanimage: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory hal-device: 0: udi = '/org/freedesktop/Hal/devices/usb_device_3f0_1405_CN39DS24B1_if0' linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) info.subsystem = 'usb' (string) info.product = 'USB Vendor Specific Interface' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_1405_CN39DS24B1_if0' (string) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 255 (0xff) (int) usb.device_subclass = 255 (0xff) (int) usb.device_protocol = 255 (0xff) (int) usb.vendor_id = 1008 (0x3f0) (int) usb.product_id = 5125 (0x1405) (int) usb.vendor = 'Hewlett-Packard' (string) usb.product = 'USB Vendor Specific Interface' (string) usb.max_power = 48 (0x30) (int) usb.serial = 'CN39DS24B1' (string) usb.num_ports = 0 (0x0) (int) usb.speed = 12 (double) usb.version = 1.1 (double) usb.can_wake_up = false (bool) usb.bus_number = 2 (0x2) (int) usb.device_revision_bcd = 256 (0x100) (int) usb.linux.device_number = 2 (0x2) (int) usb.is_self_powered = true (bool) usb.interface.number = 0 (0x0) (int) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_3f0_1405_CN39DS24B1' (string) usb.interface.subclass = 255 (0xff) (int) usb.interface.class = 255 (0xff) (int) usb.interface.protocol = 255 (0xff) (int) 1: udi = '/org/freedesktop/Hal/devices/usb_device_3f0_1405_CN39DS24B1' info.vendor = 'Hewlett-Packard' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1' (string) usb_device.configuration_value = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.device_class = 255 (0xff) (int) usb_device.device_subclass = 255 (0xff) (int) usb_device.device_protocol = 255 (0xff) (int) usb_device.vendor_id = 1008 (0x3f0) (int) usb_device.product_id = 5125 (0x1405) (int) usb_device.vendor = 'Hewlett-Packard' (string) usb_device.product = 'ScanJet 3670' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_3f0_1405_CN39DS24B1' (string) usb_device.max_power = 48 (0x30) (int) info.product = 'ScanJet 3670' (string) usb_device.serial = 'CN39DS24B1' (string) usb_device.num_ports = 0 (0x0) (int) usb_device.speed = 12 (double) usb_device.version = 1.1 (double) usb_device.can_wake_up = false (bool) usb_device.bus_number = 2 (0x2) (int) usb_device.device_revision_bcd = 256 (0x100) (int) linux.device_file = '/dev/bus/usb/002/002' (string) usb_device.linux.device_number = 2 (0x2) (int) usb_device.is_self_powered = true (bool) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string) info.linux.driver = 'usb' (string) ____________________________________________________________________________________ Köszönöm, ha valaki tud segíteni! -- Szágyi Károly www.fotokaresz.hu www.myopensuse.hu