Mailinglist Archive: opensuse-factory (536 mails)

< Previous Next >
Re: [opensuse-factory] Leap 15.0: Scaling issues under X
Hi,

Am Dienstag, 22. Mai 2018, 17:33:32 CEST schrieb Michal Srb:
On úterý 22. května 2018 17:06:57 CEST Till Dörges wrote:
Screen 0: minimum 8 x 8, current 1920 x 1200, maximum 16384 x 16384
DP-3.2 connected 1920x1200+0+0 (normal left inverted right x axis y axis)

Your external monitor has almost perfect 96 DPI, but according to this xrandr
output it is not set as primary.

Also it seems that the changes from https://bugzilla.opensuse.org/
show_bug.cgi?id=1089932 are not yet in Leap 15.

Yes, intentionally. It might have broken other setups, which is not good that
close to release.

So some other change must have caused this. You could try to workaround it by
setting QT_FONT_DPI=96 in your environment.

AFAIK the proprietary nvidia driver sets the screen DPI to the DPI of the
primary monitor, which results in the same behaviour as the fix for the linked
bug. So it's actually the desired behaviour here.

You can workaround it by either:
a) Overriding the font DPI to 96
b) Starting X with "-dpi 96"
c) (Preferred) Set the external monitor as primary one

Cheers,
Fabian


Michal





--
To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse-factory+owner@xxxxxxxxxxxx

< Previous Next >
Follow Ups