opencc opencc-data
Changed packages:
==== libdirectfb-1_7-6 ====
- inject the timestamp of the .changes file instead of the rebuild time
to get a reproducible build time
==== LibVNCServer-devel ====
Subpackages: libvncclient0 libvncserver0
- Remove xorg-x11-devel from buildRequires, X libraries
are not directly used/linked
- libvncserver-0.9.10-ossl.patch: Update, do not
RAND_load_file("/dev/urandom", 1024) if the the PRNG is already
seeded. (It always is on linux)
==== Mesa ====
Version update (10.4.3 -> 10.4.4)
Subpackages: Mesa-32bit Mesa-devel Mesa-dri-devel Mesa-libEGL-devel Mesa-libEGL1 Mesa-libEGL1-32bit Mesa-libGL-devel Mesa-libGL1 Mesa-libGL1-32bit Mesa-libGLESv1_CM-devel Mesa-libGLESv1_CM1 Mesa-libGLESv2-2 Mesa-libGLESv2-devel Mesa-libglapi-devel Mesa-libglapi0 Mesa-libglapi0-32bit libOSMesa-devel libOSMesa9 libOSMesa9-32bit libgbm-devel libgbm1 libgbm1-32bit libvdpau_nouveau libvdpau_r300 libvdpau_r600 libvdpau_radeonsi libwayland-egl-devel libwayland-egl1 libxatracker2
- Drop pkgconfig(libva) BuildRequires for now, as it introduces a
build-cycle.
- Update to version 10.4.4:
+ mesa: fix display list 8-byte alignment issue.
+ docs: Add sha256 sums for the 10.4.3 release.
+ egl: Pass the correct X visual depth to xcb_put_image().
+ glx/dri3: Request non-vsynced Present for swapinterval zero.
+ gallium/util: Don't use __builtin_clrsb in util_last_bit().
+ configure: Link against all LLVM targets when building clover.
+ st/osmesa: Fix osbuffer->textures indexing.
+ i965: Fix max_wm_threads for CHV.
+ Bugs fixed: fdo#88662, fdo#88930.
- Add pkgconfig(libva) BuildRequires: Build VA API support.
- baselibs.conf: enabled build of 32bit Mesa-libd3d package
(bnc#910109)
==== ModemManager ====
Version update (1.4.0 -> 1.4.2)
Subpackages: libmm-glib0
- Update to version 1.4.2:
+ MBIM:
- Update to handle 'Function Error' responses as per libmbim
1.12.
- Handle network-notified connection status messages.
+ Bluetooth: Keep track of devices as they are move across sysfs.
+ Core: case insensitive matches in the APN list.
+ ZTE: avoid using QMI in the MF60.
+ Huawei: updated port type hint strings.
+ Icera:
- Fix no IPv6 report response.
- Retry Icera probing several times.
+ Altair: increase AT probe command timeout.
+ Some other minor fixes.
==== PackageKit ====
Version update (1.0.4 -> 1.0.5)
Subpackages: PackageKit-backend-zypp PackageKit-browser-plugin PackageKit-gstreamer-plugin PackageKit-gtk3-module libpackagekit-glib2-18 typelib-1_0-PackageKitGlib-1_0
- Update to version 1.0.5:
+ Add missing --allow-downgrade and --allow-reinstall to the man
page.
+ Backend enhancements/fixes: alpm and hif.
==== a2ps ====
- BuildRequire texi2html
- Correct patch a2ps-4.14.diff (boo#915483)
- Make a2ps-open smart now
- build with PIE
==== aaa_base ====
Version update (13.2+git20140911.61c1681 -> 13.2+git20150126.090294e)
Subpackages: aaa_base-extras
- Remove the official patch for fate#314974 as now part of systemd
- Merge pull request #21 from arvidjaar/bnc/907873
- Avoid sourcing /etc/bash_completion.d twice
- Fix spelling of SUSE
- Add the official patch for Fate#314974 (bnc#903009)
==== alsa-utils ====
- Backport upstream fixes: fix missing unlock for the error path
in alsactl, more alsactl init entries, alsaucm build fix
0016-alsactl-add-missing-state_unlock-call.patch
0017-alsactl-init-Change-the-basic-rules-description.patch
0018-alsactl-init-Add-Line-Out-to-list-of-outputs-to-init.patch
0019-configure-allow-contitional-compilation-of-alsaucm.patch
==== amarok ====
- add the changes file as source so the .src.rpm can be rebuild
==== amor ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== apache2 ====
Subpackages: apache2-devel apache2-doc apache2-example-pages apache2-prefork apache2-utils
- httpd2.pid in rc.apache2 was wrong [bnc#898193]
==== apparmor-abstractions ====
Subpackages: apparmor-docs apparmor-parser apparmor-profiles apparmor-utils libapparmor-devel libapparmor1 libapparmor1-32bit pam_apparmor pam_apparmor-32bit perl-apparmor python3-apparmor
- add Requires: python3 to python3-apparmor package - readline isn't
part of python3-base (boo#917577)
==== argyllcms ====
- Add argyllcms.changes to Source, used to compute timestamp
- Use a stable timestamp for generated files (boo#916158), ensuring
build is reproducible.
- Move reference files to /usr/share/argyll/ref, expected path from
gnome-color-manager (bsc#914679).
==== ark ====
Version update (14.12.1 -> 14.12.2)
Subpackages: libkerfuffle4
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== atftp ====
- Add systemd support for openSUSE >= 12.1
==== autofs ====
- Fix autofs.service so that multiple options passed through
sysconfig AUTOFS_OPTIONS work correctly (bsc#909472)
- Fix configuration handling now that we have /etc/autofs.conf
and /etc/sysconfig/autofs. Runtime options are now configured in
the former, while settings that affect the daemon start up are
still handled in the latter.
- Clean-up sysconfig.autofs, leave only init script options:
$OPTIONS and $USE_MISC_DEVICE.
- Run %fillup also when systemd is enabled. (bsc#906606)
==== avogadro ====
Version update (1.1.0 -> 1.1.1)
Subpackages: avogadro-devel libavogadro1
- Update to version 1.1.1
* Rudimentary support for retinal display Macs
* Support for manual adjustment of the view
* DNA/RNA builder
* Simple LAMMPS input generator for water
* PSI4 input generator added
* Fixed QTAIM to work on Windows
* Updated gl2ps snapshot
- Remove fixed patches
* avogadro-1.1.0-no-return-in-nonvoid-function.patch
* MopacAuxReaderFix.patch
* shlib-pic-flag.patch
- Use %cmake macro
==== libbabl-0_1-0 ====
Version update (0.1.10 -> 0.1.12)
- Drop vala, libtool and gobject-introspection-devel BuildRequires,
they are no longer needed.
- Due to above changes, no longer define build_vala, stop passing
autogen.sh to configure, nor --enable-introspection or
- -without-vala.
- Drop typelib-1_0-Babl-0_1 Requires from devel package, it no
longer exists.
- Update to version 0.1.12:
+ optimizations for floating point conversions, HSV and HSL
color models
+ removal of dead code
+ fixed CIE Lab conversions
- Patches Dropped:
+ babl-fix-gir-build.patch
+ babl-fix-gir.patch
+ Modified .spec to remove typelib package and gir-related %files
entries. Package no longer provides them.
==== bind ====
Subpackages: bind-chrootenv bind-doc bind-utils libbind9-140 libdns146 libirs141 libisc142 libisccc140 libisccfg140 liblwres141
- PowerPC can build shared libraries for sure.
idnkit-powerpc-ltconfig.patch
==== blinken ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== bluedevil ====
Subpackages: bluedevil-lang
- Add 0001-daemon-Don-t-try-to-infinitely-kill-monolithic-when-.patch,
kde#343682
==== bluez ====
Version update (5.27 -> 5.28)
Subpackages: bluez-cups bluez-devel libbluetooth3
- update to version 5.28
Here?s the first BlueZ release in 2015. Most of the changes since
the last one are bug fixes, but there?s actually quite many of
them this time, including:
* Fixes to GATT service discovery & probing
* Fix for bearer selection with dual-mode devices
* Fix potential crash when removing devices
* Fix issue with incomplete names in EIR data
* Fix parsing GATT name characteristics
* Fix AVCTP long press & key repetition handling
* Fixes for GATT notification handling
Besides bug fixes we?ve now also got more extensive unit tests
for new GATT code as well as better HCI decoders in btmon for
some less used 4.1 and 4.2 features. The hid2hci tool gained
support for CSR 8510 A10 devices and the hex2hcd tool received a
complete rewrite with better command handling.
==== bovo ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== brltty ====
Subpackages: brltty-driver-at-spi2 brltty-driver-brlapi brltty-driver-espeak brltty-driver-speech-dispatcher brltty-driver-xwindow libbrlapi0_6 python3-brlapi xbrlapi
- Modify systemd service file to correct brltty path (boo#917176).
==== build ====
Version update (20141120 -> 20150115)
Subpackages: build-mkbaselibs build-mkdrpms
- add recommend to perl(Net::SSL) (bnc#880212)
- add support for debian debootstrap build engine
- Update arch config
- Add support for conflicts, addselfprovides, weakdeps to query functions
- installed package handling works also for arch and debian now
- large code cleanup
- bugfixes and documentation updates
==== calibre ====
Version update (2.18.0 -> 2.19.0)
- Update to version 2.19.0:
* New Features:
- Quick view window: Allow the quickview window to be docked into the main calibre window.
- Add empty book: Allow setting the title as well as the author and series for the added empty book records.
- Windows driver for Grammata Papyre 602.
- Edit Book: Add an option to turn off auto-completion of closing tags.
- Allow adding a description for custom columns.
- Book Details panel: Allow any identifier of the form url+number to become a clickable link. For example: url1:http://example.com.
* Bug Fixes
- Conversion: Convert entities that reference non-BMP unicode codepoints on Windows and OS X correctly. Linux was not affected by this bug.
- Edit Book: Do not autocomplete the closing tag wen typing the / key inside an existing tag.
- Fix Booken Lev e-book reader not being detected in OS X and Linux.
- DOCX Input: Change handling of sequences of space characters to more closely follow Microsoft Word.
- Edit Book: Fix Table of Contents editor not remembering its saved state across calibre sessions.
- Edit book: Disallow drag and drop of documents onto the preview panel to workaround crashing bug in Qt.
- E-book viewer: Fix current page not being preserved when opening and then immediately closing the footnote window.
- PDF Output: Fix incorrect encoding for some chinese characters in the PDF Outline (Table of Contents).
* Improved news sources
- FAZ.net
- Indian Express
- CNN
==== cervisia ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== clamav ====
Version update (0.98.5 -> 0.98.6)
- Version 0.98.6 fixes several security issues:
* bsc#916217, CVE-2015-1461: Remote attackers can have
unspecified impact via Yoda's crypter or mew packer files.
* bsc#916214, CVE-2015-1462: Unspecified impact via acrafted upx
packer file.
* bsc#916215, CVE-2015-1463: Remote attackers can cause a denial
of service via a crafted petite packer file.
* bsc#915512, CVE-2014-9328: heap out of bounds condition with
crafted upack packer files.
- Obsoletes clamav-soname.patch
==== cmake ====
Version update (3.1.1 -> 3.1.3)
- Update to 3.1.3
Do not call setlocale() globally in CMake applications (#15377)
Add setlocale() calls around use of libarchive APIs (#14934, #15377)
Makefile: Fix regression in target-bound custom command COMMENT output
- Update to 3.1.2
install: Fix regression in default configuration selection
CPack: Fix packaging of source tarballs with symbolic links
KWSys Directory: Check opendir return value before using it (#15367)
Help: Clarify status of link_libraries command
Normalize OBJECT_DEPENDS paths to match custom commands (#15366)
MSVC: Fix initialization of RelWithDebInfo shared library link flags (#15385)
FeatureSummary: Fix bracket in documentation.
FindOpenSSL: fix detection of OpenSSL 1.0.2
ctest_build: Update GNU make error message matching (#15379)
==== dbus-1-devel ====
Version update (1.8.14 -> 1.8.16)
Subpackages: libdbus-1-3 libdbus-1-3-32bit
- Update to 1.8.16:
* Security fixes:
- Do not allow non-uid-0 processes to send forged
ActivationFailure messages. On Linux systems with systemd
activation, this would allow a local denial of service:
unprivileged processes could flood the bus with these forged
messages, winning the race with the actual service activation
and causing an error reply to be sent back when service
auto-activation was requested. This does not prevent the real
service from being started, so it only works while the real
service is not running. (CVE-2015-0245, fdo#88811, bnc#916343;
Simon McVittie)
* Other fixes:
- fix a Windows build failure (fdo#88009, Ralf Habacker)
- on Windows, allow up to 8K connections to the dbus-daemon
instead of the previous 64, completing a previous fix which
only worked under Autotools (fdo#71297, Ralf Habacker)
==== dbus-1 ====
Version update (1.8.14 -> 1.8.16)
Subpackages: dbus-1-x11
- Update to 1.8.16:
* Security fixes:
- Do not allow non-uid-0 processes to send forged
ActivationFailure messages. On Linux systems with systemd
activation, this would allow a local denial of service:
unprivileged processes could flood the bus with these forged
messages, winning the race with the actual service activation
and causing an error reply to be sent back when service
auto-activation was requested. This does not prevent the real
service from being started, so it only works while the real
service is not running. (CVE-2015-0245, fdo#88811, bnc#916343;
Simon McVittie)
* Other fixes:
- fix a Windows build failure (fdo#88009, Ralf Habacker)
- on Windows, allow up to 8K connections to the dbus-daemon
instead of the previous 64, completing a previous fix which
only worked under Autotools (fdo#71297, Ralf Habacker)
==== dconf ====
Subpackages: gsettings-backend-dconf libdconf1
- Move ca.desrt.dconf-editor.appdata.xml to dconf-editor
subpackage: the appdata.xml file is supposed to be in the same
package as the .desktop file (boo#915692).
==== dd_rescue ====
Subpackages: dd_rescue-lzo
- include the .changes file in the .src.rpm as its used during build
==== dhcp ====
Subpackages: dhcp-client dhcp-doc dhcp-relay dhcp-server
- do not check scripts not in the src.rpm
==== dmraid ====
- remove with -f to avoid dependency on local umask
==== doxygen ====
Version update (1.8.8 -> 1.8.9.1)
- Update to 1.8.9.1:
* bugfix releas, see
http://www.stack.nl/~dimitri/doxygen/manual/changelog.html
for details
==== dracut ====
- regenerate the initrds on updating this package (or the -fips
subpackage)
- Apply patch for systemd-journald SIGTERMing on boot bnc#915575
* 0167-do-not-symlink-var-log-to-run-log.patch
==== dragonplayer ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== emacs ====
Subpackages: emacs-info emacs-nox emacs-x11 etags
- don't reference unexistant info pages (only exist on win32)
==== enblend-enfuse ====
- Introduce _build_doc defines (currently set to 0): Allow to
easily enable/disable the building of the documentation (incl.
the reevant BuildRequires and file sections). Currently disabled,
as enblend fails with texinfo 5.1; upstream is aware but there
are multiple ways the texi files are broken (mainly using invalid
characters for defintions).
==== evolution ====
Version update (3.12.10 -> 3.12.11)
- Update to version 3.12.11 (boo#916784):
+ Updated translations.
==== evolution-data-server ====
Version update (3.12.10 -> 3.12.11)
Subpackages: evolution-data-server-devel libcamel-1_2-49 libebackend-1_2-7 libebook-1_2-14 libebook-contacts-1_2-0 libecal-1_2-16 libedata-book-1_2-20 libedata-cal-1_2-23 libedataserver-1_2-18 typelib-1_0-EBook-1_2 typelib-1_0-EBookContacts-1_2 typelib-1_0-EDataServer-1_2
- Update to version 3.12.11 (boo#916784):
+ [ECalClient] Do not replace cached timezones.
+ Bugs fixed: bgo#736006, bgo#732145.
+ Updated translations.
==== evolution-ews ====
Version update (3.12.10 -> 3.12.11)
Subpackages: evolution-ews-lang libeews-1_2-0 libewsutils0
- Update to version 3.12.11 (boo#916784):
+ Avoid/workaround usage of an EAsyncClosure when opening an
EClient.
+ Bugs fixed: bgo#743959.
+ Updated translations.
==== libexiv2-13 ====
Subpackages: libexiv2-devel
- fix a Buffer Overflow in INFO tags of RIFFVIDEO.CPP
(fix-overflow-in-info-tags-r3264.patch)
==== festival ====
Version update (2.1 -> 2.4)
- Update to version 2.4
* Updated HTS and CG engines
* Support for newer compilers
* Bug fixes galore.
* Backwards compatibility with Festival 1.4.3
* English (British and American), Spanish and Welsh text to speech
* Externally configurable language independent modules:
- phonesets
- lexicons
- letter-to-sound rules
- tokenizing
- part of speech tagging
- intonation and duration
* Waveform synthesizers:
- Multisyn unit selection engine
- HTS parametric synthesis engine
- Clustergen parametric synthesis engine
- Clunits unit selection engine
- diphone based: residual excited LPC (and PSOLA not for distribution)
- MBROLA database support.
- distributed under a free X11-type licence
* Portable (Unix) distribution
* On-line documentation
* SABLE markup, Emacs, client/server, scripting interfaces.
- Update speech_tools-undefined-operation.patch
- Remove speech_tools-gcc47.patch; merged on upstream release
- Add festvox_rablpc16k.tar.gz; new upstream english festvox
==== fprintd ====
Version update (0.5.1 -> 0.6.0)
Subpackages: fprintd-pam fprintd-pam-32bit
- Update to version 0.6.0:
+ Fix warning in fprintd.pod file.
+ Reduce logging during normal operation.
+ Fix eventfd leak in PAM module.
+ List possible values for finger when enrolling.
+ Fix possible crash in fprintd-verify.
+ Fix listing and deleting fingerprints when there's more than
one reader available.
- Drop fprintd.pod-syntax.patch: fixed upstream.
==== gdm ====
Subpackages: gdmflexiserver libgdm1 typelib-1_0-Gdm-1_0
- Only install gdm-fingerprint and gdm-smartcard pamfiles if
enable_split_authentication is enabled (boo#900836).
==== gedit ====
Version update (3.14.2 -> 3.14.3)
Subpackages: python3-gedit
- Update to version 3.14.3:
+ Various bug fixes.
+ Updated translations.
==== gedit-plugin-zeitgeist ====
Subpackages: gedit-plugins gedit-plugins-lang
- Move zeitgeist Requires to the gedit-plugin-zeitgeist
sub-package, avoid dragging in zeitgeist for main package.
==== geoclue2 ====
- Cleanup spec file with spec-cleaner
- Update dependencies
- Do not try to remove .la files
==== gettext-runtime ====
Version update (0.19.3 -> 0.19.4)
Subpackages: gettext-tools
- GNU gettext 0.19.4:
* The --keyword option of xgettext now accepts same argument
number for both singular and plural forms.
* Programming languages support:
- C#: xgettext now properly handles Unicode characters encoded
with surrogate pairs.
- C/C++: xgettext now recognizes ISO/IEC 9899:2011 string
literals prefixed by R, u8, u8R, u, uR, U, UR, L, or LR.
- Shell: xgettext now properly recognizes Bash ANSI-C quoting
($'...').
* Bug fixes:
- Fix integer overflow when reading certain MO files with
msgunfmt.
- Avoid invalid memory access in various cases. In particular,
when the same argument number is specified for singular/
plural arguments, and when checking Lisp and Scheme format
strings.
==== git ====
Version update (2.2.2 -> 2.3.0)
Subpackages: git-core git-cvs git-daemon git-email git-gui git-svn git-web gitk
- git 2.3.0:
Many small corrections and improvements.
- UI, Workflows and Features:
* New GIT_SSH_COMMAND environment variable
* Can now store empty notes
* "git interpret-trailers" learned to properly handle the
"Conflicts:" block at the end.
* "git am" learned "--message-id" option
* "git clone --reference=<over there>" learned the "--dissociate"
option
* "git send-email" learned the "--transfer-encoding" option
* "git send-email" learned the "--no-xmailer" option
* "git branch -d" (delete) and "git branch -m" (move) learned to
honor "-f" (force) flag
* "git imap-send" learned to take "-v" (verbose) and "-q" (quiet)
command line options.
==== gitg ====
Version update (3.14.1 -> 3.15.1)
Subpackages: gitg-lang libgitg-1_0-0 libgitg-ext-1_0-0
- Update to version 3.15.1:
+ Updated translations.
- Switch build_from_vcs to 0 and use the released tarball again.
- Fix version tag: it is 3.14.1+git, not 3.4.1+git.
- Update to version v3.14.1+1422055285:
+ Improve search.
+ Do not ignore submodules for checking index.
+ Bump libgit2-glib to 0.22.0.
+ Fix api breaks from libgit2-glib.
+ Updated translations.
- Drop gitg-Show-correct-header-bars-buttons.patch: fixed upstream.
- Introduce build_from_vcs defines, currently set to 1, to easily
switch between git snapshots and released tarballs. Based on this
condition, add gnome-common BuildRequires and call to autogen.sh.
- Add pkgconfig(libsecret-1) BuildRequires: new dependency.
- Drop hack to fixup .gir file: no longer needed.
==== gnome-shell-search-provider-gnome-terminal ====
Subpackages: gnome-terminal nautilus-extension-terminal
- Add gnome-terminal-fix-crash.patch: Fix crash with empty child
process command line (bgo#742560).
- Add gnome-terminal-transparency.patch: Allow gnome-terminal to be
set to transparent.
- Add gnome-terminal-transparency-fix-for-broken-themes.patch:
Ensure that the window itself always has a background. Some
themes don't specify a widget background color.
==== goffice-lang ====
Version update (0.10.19 -> 0.10.20)
Subpackages: libgoffice-0_10-10
- Update to version 0.10.20:
+ Ensure the validity of the dims property for linear regression
curves.
+ Fix marker problem with line plots.
==== gpg2 ====
Version update (2.1.1 -> 2.1.2)
- update to 2.1.2:
* gpg: The parameter 'Passphrase' for batch key generation works
again.
* gpg: Using a passphrase option in batch mode now has the
expected effect on --quick-gen-key.
* gpg: Improved reporting of unsupported PGP-2 keys.
* gpg: Added support for algo names when generating keys using
- -command-fd.
* gpg: Fixed DoS based on bogus and overlong key packets.
* agent: When setting --default-cache-ttl the value
for --max-cache-ttl is adjusted to be not lower than the former.
* agent: Fixed problems with the new --extra-socket.
* agent: Made --allow-loopback-pinentry changeable with gpgconf.
* agent: Fixed importing of unprotected openpgp keys.
* agent: Now tries to use a fallback pinentry if the standard
pinentry is not installed.
* scd: Added support for ECDH.
* Fixed several bugs related to bogus keyrings and improved some
other code.
- in gnupg-2.0.18-files-are-digests.patch, change buffer_to_u32 to
buf32_to_u32 from host2net.h to match upstream changes
- now requires automake 1.14
==== gpgme ====
Subpackages: libgpgme-devel libgpgme11
- making the build reproducible - see
http://lists.gnupg.org/pipermail/gnupg-commits/2014-September/010683.html
for a very similiar problem
==== grep ====
- grep-F-heap-overrun.patch: fix heap overrun with grep -F (CVE-2015-1345,
bsc#914695)
==== groff ====
Version update (1.22.2 -> 1.22.3)
- Version bump to latest release 1.22.3:
* X11 resources for `gxditview', which were previously installed in
/usr/X11/lib/X11/app-defaults no matter which `prefix' was set, are
now installed in appresdir=$prefix/lib/X11/app-defaults. If
`appresdir' is not a standard X11 resource directory, the environment
variable XFILESEARCHPATH should be set to this path. The standard
default directories depends on the system `libXt'.
* This new preprocessor (contributed by Bernd Warken) allows embedding of
code for GNU LilyPond (http://www.lilypond.org), a music typesetter. The
data gets automatically processed and embedded as EPS images.
* Bernd Warken contributed a new preprocessor to handle Perl code that can
be evaluated and then processed by groff.
* Another preprocessor from Bernd Warken to pretty-print Pinyin syllables
like `guo2wang2' as `gu�w�ng'.
* The pdfroff utility script now activates its `--no-toc-relocation' option
by default, unless a request similar to:
.if !\n[PHASE] .tm pdfroff-option:set toc_relocation=enabled
is invoked during input file processing; (`.if !\n[PHASE] ...' ensures
that the effect of the `.tm' request is restricted to the document setup
phase of processing, as pdfroff sets it to 1 or 2 in the output phase,
but leaves it unset in the setup phase).
The bundled `spdf.tmac' macro package, which implicitly activates
`-mpdfmark' for `ms' macro users, ensures that TOC relocation is
appropriately enabled, when the `.TC' macro is invoked.
* The -mom macro package now has full support for eqn, pic, and tbl, as well
as captioning and labelling of pdf images and preprocessor output. Lists
of Figures, Equations, and Tables can now be autogenerated. PDF_IMAGE has
a new FRAME option.
* A French introduction to the -me macro package has been added (file
`meintro_fr.me').
* In -mdoc, command %C is now available, providing a city or place
reference.
- Refreshed patches:
* groff-1.21-CVE-2009-5081.patch
* groff-1.21-groffer-libexecdir.patch
* groff-force-locale-usage.patch
- Replaced patches:
* deleted groff_1.22.2-2.debian.diff
* added groff_1.22.3-1.debian.diff
- New patches:
* groff-multi-thread.patch
==== groff-full ====
Version update (1.22.2 -> 1.22.3)
Subpackages: gxditview
- Version bump to latest release 1.22.3:
* X11 resources for `gxditview', which were previously installed in
/usr/X11/lib/X11/app-defaults no matter which `prefix' was set, are
now installed in appresdir=$prefix/lib/X11/app-defaults. If
`appresdir' is not a standard X11 resource directory, the environment
variable XFILESEARCHPATH should be set to this path. The standard
default directories depends on the system `libXt'.
* This new preprocessor (contributed by Bernd Warken) allows embedding of
code for GNU LilyPond (http://www.lilypond.org), a music typesetter. The
data gets automatically processed and embedded as EPS images.
* Bernd Warken contributed a new preprocessor to handle Perl code that can
be evaluated and then processed by groff.
* Another preprocessor from Bernd Warken to pretty-print Pinyin syllables
like `guo2wang2' as `gu�w�ng'.
* The pdfroff utility script now activates its `--no-toc-relocation' option
by default, unless a request similar to:
.if !\n[PHASE] .tm pdfroff-option:set toc_relocation=enabled
is invoked during input file processing; (`.if !\n[PHASE] ...' ensures
that the effect of the `.tm' request is restricted to the document setup
phase of processing, as pdfroff sets it to 1 or 2 in the output phase,
but leaves it unset in the setup phase).
The bundled `spdf.tmac' macro package, which implicitly activates
`-mpdfmark' for `ms' macro users, ensures that TOC relocation is
appropriately enabled, when the `.TC' macro is invoked.
* The -mom macro package now has full support for eqn, pic, and tbl, as well
as captioning and labelling of pdf images and preprocessor output. Lists
of Figures, Equations, and Tables can now be autogenerated. PDF_IMAGE has
a new FRAME option.
* A French introduction to the -me macro package has been added (file
`meintro_fr.me').
* In -mdoc, command %C is now available, providing a city or place
reference.
- Refreshed patches:
* groff-1.21-CVE-2009-5081.patch
* groff-1.21-groffer-libexecdir.patch
* groff-force-locale-usage.patch
- Replaced patches:
* deleted groff_1.22.2-2.debian.diff
* added groff_1.22.3-1.debian.diff
- New patches:
* groff-multi-thread.patch
==== grub2 ====
Subpackages: grub2-i386-pc grub2-snapper-plugin grub2-x86_64-efi grub2-x86_64-xen
- Downgrade os-prober dependency to Recommends (boo#898610)
==== gthumb ====
Version update (3.3.2 -> 3.3.3)
Subpackages: gthumb-lang
- Update to version 3.3.3:
+ New features and user visible changes:
- Allow to apply the embedded color profile for jpeg images.
- New image tools: special effects; curves.
- Unified 'equalize histogram' and 'adjust contrast': show a
preview of the various contrast filters.
- Grayscale tool: show a preview of the different filters.
- Fixed the interface style when used with gtk+ 3.14
- File propery view: use a switcher; added a details page that
show all the metadata, show only the important exif fields in
the properties page.
- UI changes to the preferences dialog: use a sidebar instead
of a notebook to avoid a large dialog with some translations;
better spacing; removed the Ok button.
- Video player: save the screenshot without showing the dialog.
- Allow to set the screenshots location in the extension
preferences dialog.
- Show a message in the statusbar after saving.
- Gear menu: use the new icon if using gtk+ 3.13 or newer.
+ Bugs fixed:
- video player: do not hide the mediabar when using the volume
control.
- Forbidden when trying to upload to Flickr (bgo#732557).
- Build against either webkit2gtk-3.0 or webkit2gtk-4.0.
+ Updated translations.
- Drop gthumb-webkit2gtk.patch,
gthumb-new-icon-for-gear-menu.patch and
gthumb-fix-forbidden-flicker-upload.patch, Fixed upstream.
- Following above change: remove gnome-common BuildRequires and
call to gnome-autogen.sh, as we no longer carry any patches.
- Add pkgconfig(lcms2) BuildRequires: Build the new optional LCMS2
support.
==== gtk-doc ====
Subpackages: gtk-doc-lang
- Add gtk-doc-reproducible-html.patch from the debian
reproducible builds project to make output reproducible.
==== gtk-vnc-lang ====
Version update (0.5.3 -> 0.5.4)
Subpackages: libgtk-vnc-2_0-0 libgvnc-1_0-0 typelib-1_0-GVnc-1_0 typelib-1_0-GtkVnc-2_0
- Update to version 0.5.4:
+ Fix auth when using PLAIN SASL method.
+ Fix introspection build support on FreeBSD.
+ Remove use of deprecated GTK_STOCK_* constants.
+ Fix parallel build for introspection files.
+ Add mising dep on Gtk introspection file.
+ Release held keys when getting grab notify.
+ Updated translations.
+ Don't call into GDK if no GdkWindow is realized.
+ Chain up parent realize_event vfunc.
+ Fix colourmap mode by always sending pixel format message.
+ Update GCC compiler warning flags used.
+ Enable double buffering on Gtk3 to fix child widget clipping.
+ Disable -Wbad-function-cast to avoid glib header warnings.
+ Don't set thread callbacks on gcrypt >= 1.6 or gnutls >= 2.12.
+ Do explicit check for gcrypt since gnutls might use nettle.
+ Add support for Wayland & Xwayland keymaps.
+ Add support for Gtk Broadway backend keymaps.
+ Fix AltGr handling on Windows displays.
+ Fix virtual keycode conversion on Win32.
+ Fix USB/HID scsancodes for volume keys.
==== libgtk-vnc-1_0-0 ====
Version update (0.5.3 -> 0.5.4)
- Update to version 0.5.4:
+ Fix auth when using PLAIN SASL method.
+ Fix introspection build support on FreeBSD.
+ Remove use of deprecated GTK_STOCK_* constants.
+ Fix parallel build for introspection files.
+ Add mising dep on Gtk introspection file.
+ Release held keys when getting grab notify.
+ Updated translations.
+ Don't call into GDK if no GdkWindow is realized.
+ Chain up parent realize_event vfunc.
+ Fix colourmap mode by always sending pixel format message.
+ Update GCC compiler warning flags used.
+ Enable double buffering on Gtk3 to fix child widget clipping.
+ Disable -Wbad-function-cast to avoid glib header warnings.
+ Don't set thread callbacks on gcrypt >= 1.6 or gnutls >= 2.12.
+ Do explicit check for gcrypt since gnutls might use nettle.
+ Add support for Wayland & Xwayland keymaps.
+ Add support for Gtk Broadway backend keymaps.
+ Fix AltGr handling on Windows displays.
+ Fix virtual keycode conversion on Win32.
+ Fix USB/HID scsancodes for volume keys.
==== gtk2-data ====
Subpackages: gtk2-devel gtk2-immodule-amharic gtk2-immodule-inuktitut gtk2-immodule-thai gtk2-immodule-vietnamese gtk2-immodule-xim gtk2-tools gtk2-tools-32bit libgtk-2_0-0 libgtk-2_0-0-32bit typelib-1_0-Gtk-2_0
- Add gtk2-Do-not-leak-a-cairo-region.patch: Fix memory leak
(bgo#738837).
- Add gtk2-gdk_window_begin_paint_region.patch: When using the
implicit paint pixmap, always draw to the same surface each time
rather than creating a new one each time. This is both more
effective and more natural (bgo#741060).
==== guile ====
Subpackages: guile-modules-2_0 libguile-2_0-22
- use fake buildstamp [bnc#916347]
+ guile-fake-buildstamp.patch
==== help2man ====
Version update (1.46.4 -> 1.46.5)
- help2man 1.46.5:
* Fix a problem with LC_ALL being imported twice with different
prototypes from POSIX and Locale::gettext
* Update copyright years.
==== hylafax+ ====
Subpackages: hylafax+-client
- fix for bnc#856906
==== inkscape ====
Version update (0.48.5 -> 0.91)
Subpackages: inkscape-extensions-dia inkscape-extensions-extra inkscape-extensions-fig inkscape-extensions-gimp inkscape-extensions-skencil inkscape-lang
- Update to version 0.91:
+ Improved performance. The new renderer is significantly faster
on most drawings.
+ OpenMP multithreading for filters.
+ Substantial memory savings.
+ Responsiveness improvements.
+ Rendering bug fixes. The following things now render correctly:
- Pattern fills (no more gaps between tiles, regardless of
transformation).
- Stroke of transformed objects in patterns.
- Patterns containing clipped objects.
- Nested clipping paths.
- Masked and clipped objects with large masks / clipping paths
in Outline view.
- Paths with wide strokes and long miters.
- Fonts.
+ A grayscale display color mode has been added, that shows a
preview of your drawing in grayscale.
+ The tool control bar for the Node Tool features a new dropdown
to insert new nodes on the selected segments extreme values.
+ The Measurement tool is a new feature for the artist to measure
the elements in their drawing.
+ Text size default unit is now points (pt) and is customizable
(px,pt,pc,mm,cm,in,em).
+ Text toolbar shows full list of font style variants for that
font.
+ Files with text in em units read correctly.
+ Font substitution warning dialog.
+ Gradient toolbar enhanced to select and modify gradient stops,
invert, repeat, and link gradients.
+ On-canvas gradient editing fixes: double clicking to create
stops, correct focus on select.
+ Gradients sortable by color, name and usage in Fill/Stroke.
+ Gradients can be renamed in Fill/Stroke.
+ New Find/Replace dialog can operate on text or any attribute.
+ Drag and drop to reorder layers and create sublayers.
+ Show/Hide All layers options in context menu.
+ Inkscape has a new Symbols dialog.
+ Visio Stencil files (.vss) can also be used by dropping them in
the same symbols directory.
+ See http://wiki.inkscape.org/wiki/index.php/Release_notes/0.91
for a full list of changes.
- Drop upstream fixed patches:
+ inkscape-return-on-exit.patch
+ inkscape-apply-invert-transform.patch
+ inkscape-0.48.5-librevenge.patch
+ inkscape-fix-build-with-poppler-0.29.patch (r13685)
+ inkscape-gc-detection.patch (r12155)
- Rebase inkscape-packages.patch.
- Add pkgconfig(libexif) BuildRequires: enable EXIF support.
- Add aspell-devel BuildRequires: enable spell checking support.
- Add pkgconfig(libcdr-0.1) and pkgconfig(libvisio-0.1)
BuildRequires: support for more image formats.
- Add pkgconfig(dbus-glib-1) BuildRequires: new dependency.
- Remove docbook-toys and sgml-skel BuildRequires: no longer
needed.
==== install-initrd-openSUSE ====
Version update (14.161 -> 14.164)
- add snapper.file_list
- 14.164
- create snapper image (fate #318392)
- 14.163
- align to new xorg packages
- update README
- fix zenworks boot theme
- zenworks adjustments
- 14.162
- libsmbios2 only exists on ia64 and x86
==== ispell ====
Subpackages: ispell-american ispell-british
- Xemacs knows about define-coding-system-alia therefore use it (boo#896947)
==== java-1_8_0-openjdk ====
Version update (1.8.0.40~b22 -> 1.8.0.40~b25)
Subpackages: java-1_8_0-openjdk-headless
- Upgrade to upstream tag jdk8u40-b25
- Upgrade to upstream tag jdk8u40-b24
- Upgrade the aarch64 hotspot to new tip
* sync-ed with jdk8u40-b23
- Removed patch
* aarch64-b12tob22.patch
- Not needed since the aarch64 tarball is on a recent enough
tag
- Modified patch
* s390-size_t.patch
- Adapt to hotspot changes
==== juk ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kalzium ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kio_kamera ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== katomic ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kblackbox ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kblocks ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kbounce ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kbreakout ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kbruch ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kcachegrind ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kcalc ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kcharselect ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kcolorchooser ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kcron ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kde-mplayer-thumbnailer ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kde4-print-manager ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
- Drop upstreamed patch dont-make-configure-dialog-modal.patch
==== kdeartwork4-decorations ====
Version update (14.12.1 -> 14.12.2)
Subpackages: kdeartwork4-screensaver
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== dolphin ====
Version update (14.12.1 -> 14.12.2)
Subpackages: kdebase4-libkonq kdebase4-nsplugin kdepasswd kdialog keditbookmarks konqueror konqueror-plugins libkonq-devel libkonq5 plasmoid-folderview
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kdebase4-runtime ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kde4-kgreeter-plugins ====
Version update (4.11.15 -> 4.11.16)
Subpackages: kdebase4-workspace kdebase4-workspace-addons kdebase4-workspace-devel kdebase4-workspace-ksysguardd kdebase4-workspace-liboxygenstyle kdebase4-workspace-libs kdebase4-workspace-plasma-calendar kdm kwin oxygen-cursors4 python-kdebase4
- Update to 4.11.16
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kdeedu-data ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kdelibs4 ====
Version update (4.14.4 -> 4.14.5)
Subpackages: kdelibs4-core kdelibs4-doc libkde4 libkde4-devel libkdecore4 libkdecore4-devel libksuseinstall-devel libksuseinstall1
- Update to 4.14.5
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kdenetwork4-filesharing ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== akonadi ====
Version update (4.14.4 -> 4.14.5)
Subpackages: akregator blogilo kaddressbook kalarm kdepim4 kjots kmail knode knotes kontact korganizer ktimetracker ktnef libkdepim4
- Update to 4.14.5
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kdepim4-runtime ====
Version update (4.14.4 -> 4.14.5)
- Update to 4.14.5
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kdepimlibs4 ====
Version update (4.14.4 -> 4.14.5)
Subpackages: libakonadi4 libkdepimlibs4 libkdepimlibs4-devel
- Update to 4.14.5
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kio_svn ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kdesdk-strigi-analyzers ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kdesdk4-scripts ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kfilereplace ====
Version update (14.12.1 -> 14.12.2)
Subpackages: kimagemapeditor klinkstatus
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kdf ====
Version update (14.12.1 -> 14.12.2)
Subpackages: kwikdisk
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kdiamond ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kdnssd ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kernel-firmware ====
Version update (20141122git -> 20150209git)
Subpackages: ucode-amd
- David Woodhouse is not maintaining this all by himself any more,
switch to proper upstream repository and get a fresh snapshot.
(bumping version to 20150209git)
==== kexec-tools ====
Version update (2.0.8 -> 2.0.9)
- Upgrade to kexec-2.0.9: This is a bug-fix release coinciding with
the release of the v3.19 Linux Kernel.
==== keyutils ====
Subpackages: keyutils-devel libkeyutils1 libkeyutils1-32bit
- keyutils-nodate.patch: avoid including the timestamp. bsc#916180
==== kfloppy ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kgamma ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kgeography ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kget ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kgoldrunner ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kgpg ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kio_audiocd ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kiriki ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== fonts-KanjiStrokeOrders ====
Version update (14.12.1 -> 14.12.2)
Subpackages: kiten
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kiwi ====
Version update (7.02.22 -> 7.02.25)
Subpackages: kiwi-desc-isoboot kiwi-desc-netboot kiwi-desc-oemboot kiwi-desc-vmxboot kiwi-doc kiwi-media-requires kiwi-pxeboot kiwi-templates kiwi-tools
- v7.02.25 released
- DB: rebuild documentation
- DB: man page clarify use of images.sh/config.sh
- aarch64: Load full EFI emulation size
-boot-load-size 1 is not a recommended option. First of all
a loader size that is not divideable by 4 is rejected by
most EFI firmwares. In addition we need to load all of the
EFI code into memory. When the option is not set, genisoimage
uses the full length by default, which is what we want.
- v7.02.24 released
- Fixed callPartitioner
Instead of making the decision for the correct partition tool
by the name of the device use a method which knows better about
the type of the storage device. This applies to s390 only were
a dasd device could be a real dasd with 4k blocksize or an
emulated dasd with 512byte blocksize. In the first case fdasd
is used and in the other case parted must be used. The decision
for the tool is now based on the result if isDASDDevice()
which returns false for emulated dasd devices because we
only distinguish a different handling if the blocksize of the
device is _not_ 512byte
- Fixed critic testing via perlcritic
perlcritic on 13.2 reports a module to not end with a true value
which is wrong and older versions of perlcritic do not complain
about the same code. As I don't want to dig into what perlcritic
does I decided to move the module in question to be not level 4
clean
- Fixed handling of zipl options
For some reason it was not possible to provide the
information as commandline arguments. Thus we wrote
it into the menu section. In addition the verbose
zipl installation information is now part of the
kiwi build log file
- Fixed import of emulated dasd device
dasd_configure is required to be called but kiwi
skipped that step for emulated dasd devices and
thus they did not exist on boot
- Added support for emulated DASD devices on s390
an emulated dasd is a dasd device in FBA mode using
512byte blocksize. kiwi did not properly install zipl
to allow to boot from such devices
- Fix ARM build
- collecting of -debuginfo packages from special suffixed packages
- Fixed importHostPackageKeys
Import on systems which doesn't have a
/usr/lib/rpm/gnupg/keys structure failed
- Fixed exception handling if device type is unknown
- Added support for s390 emulated DASD devices
An emulated DASD device is a disk with 512byte blocksize
like it is the case for real zFCP (scsi) devices. Therefore
kiwi handles an emulated DASD like a zFCP device but does
not configure host and disk adapter for it
- Fixed SLES12 s390 JeOS image template
deleted obsolete packages, update pattern name
- Fixed resetBootBind
make sure the tmp directory is removed while moving the
boot data one hierarchy level up
- DB: rebuild documentation
- DB: update man page
- Cleanup service handling config functions
Enable/Disable a service is no longer done using the suse
specific insserv tool. Instead chkconfig for sysVInit or
systemctl for systemd based systems is used. This this
methods can be considered generic and should be base
functions
- DB: rebuild documentation
- DB: Update documentation and man page
- v7.02.23 released
- Fixed creation of split images
The filename for the splitfile which is the read-write portion
of the image was build taking the displayname into account.
Only if the displayname was not set the filename was correct
because in that case the displayname and the diskname are the
same. If a custom displayname is set the splitfile name was
wrong and the read-write data was not included to the image
In addition this patch uses the kiwi.buildinfo file to check
for the image type instead of taking weird assumptions based
on file names
- Make sure to handle all udev daemon processes
If the call to udevadm control for some reason did not
stop all udev daemon processes kiwi checks the pids it
found and kills them manually. However kiwi just looked
up one process even though there might be more
- Use udevadm control to exit udev daemon
Killing the udevd is done in two steps. First we issue
an udevadm call to exit udevd the documented way. According
to the man page the call waits until udevd is stopped.
After the call we check against the process ID of udevd
we know about if they really have been stopped. If not we
kill them
==== kjumpingcube ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== klettres ====
Version update (14.12.0 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
- Update to KDE Applications 14.12.1
* KDE Applications 14.12.1
* See https://www.kde.org/announcements/announce-applications-14.12.1.php
==== kmag ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kmahjongg ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kmines ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kmix ====
Version update (14.12.0 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kmousetool ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kmouth ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kmplot ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== knavalbattle ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== knetwalk ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kolf ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kollision ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kolourpaint ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kompare ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== konquest ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kopete ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kpat ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kppp ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kqtquickcharts ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== krdc ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kremotecontrol ====
Version update (14.12.1 -> 14.12.2)
Subpackages: liblibkremotecontrol1
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kreversi ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== krfb ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kruler ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== ksaneplugin ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kscd ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kshisen ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== ksirk ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== ksnapshot ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kspaceduel ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== ksquares ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kstars ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== ksudoku ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== ksystemlog ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kteatime ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== ktimer ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== ktorrent ====
- Add properly-support-x-scheme-handler-magnet-mimetype.patch,
make ktorrent support magnet mimetype outside KDE4
==== ktouch ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kturtle ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== ktux ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kubrick ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kwalletmanager ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kwordquiz ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== liblasem-0_4-4 ====
Version update (0.4.1 -> 0.4.2)
- Update to version 0.4.2:
+ Build improvements.
+ Add man page for lasem-render.
+ Updated translations.
- Drop lasem-bison-3.0.patch and lasem-nonvoid.patch: Fixed
upstream.
==== libburn4 ====
Subpackages: libisoburn1 libisofs6
- Handle the .info files we actually install:
+ xorrecord.info, xorriso.info and xorrisofs.info.
+ libburnia.info does not exist.
==== libcacard0 ====
Version update (2.1.0 -> 2.2.0)
- Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.2
* Patches added:
0037-AIO-Reduce-number-of-threads-for-32.patch
- Update to v2.2.0: See http://wiki.qemu-project.org/ChangeLog/2.2
- Patch queue updated from git://github.com/openSUSE/qemu.git opensuse-2.2
* Patches dropped:
0015-target-arm-linux-user-no-tb_flush-o.patch (tb_flush() not called)
0037-tests-Don-t-run-qom-test-twice.patch (superseded)
0039-linux-user-Cast-validity-checks-on-.patch (helper function introduced)
0040-linux-user-Convert-blkpg-to-use-a-s.patch (upstreamed)
* Patched renumbered:
0016-linux-user-Ignore-broken-loop-ioctl.patch -> 0015-linux-user-Ignore-broken-loop-ioctl.patch
0017-linux-user-lock-tcg.patch -> 0016-linux-user-lock-tcg.patch
0018-linux-user-Run-multi-threaded-code-.patch -> 0017-linux-user-Run-multi-threaded-code-.patch
0019-linux-user-lock-tb-flushing-too.patch -> 0018-linux-user-lock-tb-flushing-too.patch
0020-linux-user-Fake-proc-cpuinfo.patch -> 0019-linux-user-Fake-proc-cpuinfo.patch
0021-linux-user-implement-FS_IOC_GETFLAG.patch -> 0020-linux-user-implement-FS_IOC_GETFLAG.patch
0022-linux-user-implement-FS_IOC_SETFLAG.patch -> 0021-linux-user-implement-FS_IOC_SETFLAG.patch
0023-linux-user-XXX-disable-fiemap.patch -> 0022-linux-user-XXX-disable-fiemap.patch
0024-slirp-nooutgoing.patch -> 0023-slirp-nooutgoing.patch
0025-vnc-password-file-and-incoming-conn.patch -> 0024-vnc-password-file-and-incoming-conn.patch
0026-linux-user-add-more-blk-ioctls.patch -> 0025-linux-user-add-more-blk-ioctls.patch
0027-linux-user-use-target_ulong.patch -> 0026-linux-user-use-target_ulong.patch
0028-block-Add-support-for-DictZip-enabl.patch -> 0027-block-Add-support-for-DictZip-enabl.patch
0029-block-Add-tar-container-format.patch -> 0028-block-Add-tar-container-format.patch
0030-Legacy-Patch-kvm-qemu-preXX-dictzip.patch -> 0029-Legacy-Patch-kvm-qemu-preXX-dictzip.patch
0031-Legacy-Patch-kvm-qemu-preXX-report-.patch -> 0030-Legacy-Patch-kvm-qemu-preXX-report-.patch
0032-console-add-question-mark-escape-op.patch -> 0031-console-add-question-mark-escape-op.patch
0033-Make-char-muxer-more-robust-wrt-sma.patch -> 0032-Make-char-muxer-more-robust-wrt-sma.patch
0034-linux-user-lseek-explicitly-cast-no.patch -> 0033-linux-user-lseek-explicitly-cast-no.patch
0035-virtfs-proxy-helper-Provide-__u64-f.patch -> 0034-virtfs-proxy-helper-Provide-__u64-f.patch
0036-configure-Enable-PIE-for-ppc-and-pp.patch -> 0035-configure-Enable-PIE-for-ppc-and-pp.patch
0038-qtest-Increase-socket-timeout.patch -> 0036-qtest-Increase-socket-timeout.patch
==== libcamgm100 ====
Version update (1.0.7 -> 1.0.8)
Subpackages: perl-camgm
- version 1.0.8
- replace expired certificate in the testsuite (boo#916361)
- rename configure.in into configure.ac
- update Makefiles to reduce warnings
==== libdmapsharing-3_0-2 ====
Version update (2.9.24 -> 2.9.29)
- Add baselibs.conf to source list.
- Update to version 2.9.29
* Make building tests optional
- Add pkgconfig(gee-0.8) and vala build require; new upstream dependencies
==== libdrm-devel ====
Version update (2.4.58 -> 2.4.59)
Subpackages: libdrm2 libdrm2-32bit libdrm_intel1 libdrm_intel1-32bit libdrm_nouveau2 libdrm_nouveau2-32bit libdrm_radeon1 libdrm_radeon1-32bit libkms1
- Update to version 2.4.59:
* bugfixes
* more Intel Skylake support
==== libdvdnav4 ====
Version update (5.0.2 -> 5.0.3)
- Update to version 5.0.3:
+ added dvdnav_open_stream to read from external read/seek callbacks
+ fixed reading DVD label regression
==== libdvdread-devel ====
Version update (5.0.1 -> 5.0.2)
Subpackages: libdvdread4
- Update to version 5.0.2:
* Add DVDOpenStream to open a dvd from a set of callbacks
==== libe-book-0_1-1 ====
Version update (0.1.1 -> 0.1.2)
- Update to version 0.1.2
* Check arguments of public functions. Passing NULL no longer causes
cash.
* Use symbol visibility on Linux. The library only exports the two
public functions now.
* Fix handling of * *enable *experimental configure option.
* Fix various crashes and hangs when reading broken files, found
with the help of american *fuzzy *lop.
* Fix incorrect mime type for JPEG images that occurs occasionally
in FB2 files.
* Handle zipped files that contain more than one file.
* Add support for headings.
* Add support for text language.
* Convert dimensions and font sizes correctly. This makes the
output actually usable
* Parse basic paragraph and character properties.
* Add initial support for images. Only Plot tag is supported, as
Canvas is much more complex and can contain other objects too,
not just a single image.
* Recognize GIF images too.
* Parse important page properties, like dimensions and margins.
* Substitute the default fonts embedded on the devices for Liberation fonts.
* Try to reconstruct headings from table of contents.
==== libepoxy0 ====
- u_sort-the-providers-by-their-enum-not-by-their-functi.patch
* sort the providers by their enum not by their function name;
patch by coolo (bnc#917533)
==== liberation-fonts ====
Version update (1.07.3 -> 1.07.4)
- Update to version 1.07.4
* Restored Liberation Sans Bold 'u' instructions
* Resolved #1009650, renames serbian shapes as per AGL
* Added new glyph for "imacron" and "g"
* Added Correct shape for uni266B in all Liberation variants #1014357
* Resolved Problematic shapes for macedonian alphabet #1013949
==== libetpan17 ====
Version update (1.5 -> 1.6)
- Update to version 1.6
* Improved RFC822 and MIME parser
* Implemented SEARCH using LITERAL+ for Gmail
* Fixed SSL connections (don't force SSLv3)
==== libfprint0 ====
Version update (0.5.1 -> 0.6.0)
- Update to version 0.6.0
* Drivers:
- Reduce duplication between AES3500 and AES4000 drivers and
add support for AES3500 device
- Add support for UPEK 147e:2020 and Upek Eikon 2 devices
- Add EgisTec ES603 driver
- Add VFS5011 driver
- Always perform 5 scans for image enrollment
- Better verification with AES1660 driver
- Better verification for a number of AES drivers
* Library:
- Always use Pixman for image manipulation, gdk-pixbuf and ImageMagick
are not supported any more.
* Udev rules:
- Fix warning when USB hub or system does not support power management
- Add pkgconfig(pixman-1) build require; new upstream dependency
- Remove pkgconfig(gdk-pixbuf-2.0) build require; not needed anymore
==== libgadu-devel ====
Version update (1.12.0 -> 1.12.1)
Subpackages: libgadu3
- Update to version 1.12.1, bugfix release:
+ improved compatibility with GG11 protocol
+ fix segfaults when got incorrect reply from public catalog
+ fixes related to proxy servers
==== libgcrypt-devel ====
Subpackages: libgcrypt20 libgcrypt20-32bit
- making the build reproducible - see
http://lists.gnupg.org/pipermail/gnupg-commits/2014-September/010683.html
for a very similiar problem
- Move %install_info_delete calls from postun to preun: the files
must still be present to be parsed.
- Fix the names passed to install_info for gcrypt.info-[12].gz
instead of gcrypt-[12].info.gz.
- fix filename for info pages in %post scripts
==== libgexiv2-2 ====
Version update (0.7.0 -> 0.10.2)
- Update to version 0.10.2
+ Use all EXIF tags for interpreted strings (bgo#734861).
+ Automake fixes.
- Update download Url and use tarball provided by Gnome
- Rename typelib-1_0-GExiv2-0_4 to typelib-1_0-GExiv2-0_10; follow
upstream changes.
- Use %configure instead of manually defined options.
- Remove redundant %clean section.
==== libgnomesu ====
Subpackages: libgnomesu0
- Add libgnomesu-set-xdg_runtime_dir.patch: explicitly set
XDG_RUNTIME_DIR for the new user (boo#908167).
- Use rm -f to avoid rm asking back with strict umasks.
==== gsf-office-thumbnailer ====
Version update (1.14.30 -> 1.14.31)
Subpackages: libgsf-1-114 libgsf-devel typelib-1_0-Gsf-1
- Update to version 1.14.31:
+ Add two new localc name spaces to gsf-opendoc-utils
+ Add support for non-default zip compression level (bgo#722470).
+ Plug leaks.
+ Dead kittens.
+ Reduce number of CRITICALs for corrupted files.
+ Read zip files with 64k+ members (Part of bgo#732209).
+ Read zip files members larger than 4G (Part of bgo#732209).
+ Speed up zip file reading for lots of members.
+ Speed up stdio directory handling with large number of files.
+ Fix various issues with files larger than 4G.
+ Fix minor zip file issues.
+ Write zip archives with more than 64k+ members.
+ Store unix modtime in zip (Until that overflows).
+ Fix seekability checks in GsfOutputIOChannel.
+ Avoid implementation defined behaviour of shifts.
+ Start a test suite.
==== libguess1 ====
Version update (1.1 -> 1.2)
- readd deleted Copyright
- fix header
- Update to 1.2:
* Remove mowgli dependency, deprecate libguess_init().
* Remove broken links to jira.atheme.org.
* Expose libguess_init().
* Define m4 macro directory in configure.ac.
* Switch to libmowgli-2.
- Remove libguess-1.1-libmowgli.h-path.patch: fixed upstream.
- Make description shorter.
==== libical-devel ====
Subpackages: libical1
- add reproducible-generator.patch from debian bug report to
get reproducible builds (and predicatable API actually)
==== libkcddb4 ====
Version update (14.12.1 -> 14.12.2)
Subpackages: libkcddb4-devel
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== libkcompactdisc4 ====
Version update (14.12.1 -> 14.12.2)
Subpackages: libkcompactdisc4-devel
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== libkdcraw-devel ====
Version update (14.12.1 -> 14.12.2)
Subpackages: libkdcraw23
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== libkdeedu4-devel ====
Version update (14.12.1 -> 14.12.2)
Subpackages: libkeduvocdocument4
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== kdegames4-carddecks-default ====
Version update (14.12.1 -> 14.12.2)
Subpackages: libkdegames libkdegames-devel libkdegames6
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== libkexiv2-11 ====
Version update (14.12.1 -> 14.12.2)
Subpackages: libkexiv2-devel
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== libkface ====
Version update (14.12.1 -> 14.12.2)
Subpackages: libkface-devel libkface3
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== libkipi-devel ====
Version update (14.12.1 -> 14.12.2)
Subpackages: libkipi11
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== libkmahjongg ====
Version update (14.12.1 -> 14.12.2)
Subpackages: libkmahjongg-devel libkmahjongglib4
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== libkomparediff2-4 ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== libksane-devel ====
Version update (14.12.1 -> 14.12.2)
Subpackages: libksane0
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== liblrdf2 ====
Version update (0.4.0 -> 0.5.0)
- Update to version 0.5.0
* Use raptor2 and openssl for MD5
- Remove patches; fixed on upstream release
* liblrdf-symbol-conflict.diff
* raptor2-compat.diff
- Update homepage Url
- Use download Url as source
- Add openssl-devel require; new upstream dependency
==== libmikmod3 ====
Version update (3.3.6 -> 3.3.7)
- Update to version 3.3.7
* Android support, with the OpenSL ES driver adapted from the old
libmikmod-android project.
* Support for AmigaOS and its variants like MorphOS, AROS, and a new
AHI driver
* Build system configuration and packaging simplifications, tidy-ups.
* Several portability tweaks.
* New PSP driver. (untested. based on older ports from pspdev.)
* Fix some OS/2 bit rot. (for nostalgia...)
==== libmspack0 ====
Version update (0.4 -> 0.5)
- Update to version 0.5
* Please read the changelog; too many things to list
==== libmtp-devel ====
Subpackages: libmtp9
- Add device data for Droid Turbo
add: mtp_DroidTurbo.patch
==== liboauth-devel ====
Version update (0.9.4 -> 1.0.3)
Subpackages: liboauth0
- Update to version 1.0.3
* clarify documentation of oauth_curl
* fix possible memleak in oauth_curl (only relevant if an error occurs)
* fix TOCTOU in oauth_curl_post_file: the file may change between
stat() and fopen()
==== libogg-devel ====
Version update (1.3.1 -> 1.3.2)
Subpackages: libogg0 libogg0-32bit
- Update to version 1.3.2
* Fix an bug in oggpack_writecopy().
==== libpciaccess-devel ====
Version update (0.13.2 -> 0.13.3)
Subpackages: libpciaccess0 libpciaccess0-32bit
- Update to version 0.13.3
* This release provides a number of platform-specific improvements
for various platforms, including Linux, Solaris, OpenBSD, NetBSD,
and Hurd, plus the addition of some support for Cygwin.
- added baselibs.conf as source to specfile in order to make factory
checkin policy happy
==== libpinyin-data ====
Version update (1.0.0 -> 1.0.99.20150212)
- Update to 1.0.99.20150212
* fixes pinyin_get_pinyin_key_rest_offset method
* fixes pinyin_iterator_get_next_phrase method
- Update patch file:
remove old: libpinyin-1.0.0-avoid_download_at_buildtime.patch
add new: libpinyin-1.0.99.20150212-avoid_download_at_buildtime.patch
==== libqmi-glib1 ====
Version update (1.12.0 -> 1.12.4)
Subpackages: libqmi-tools
- Update to version 1.12.4:
+ Fix reading last call packet statistics.
+ Added support for the "DMS Set FCC" command, required to bring
out of low power mode several new Sierra devices.
- Update to version 1.12.2:
+ Fix bug reading sized-guints, which was making --dms-get-time
segfault.
+ Fix compilation warnings in 32 bit systems.
+ Add missing services in get_printable() and
get_version_introduced().
==== libQt5Core5 ====
Subpackages: libQt5DBus5 libQt5Gui5 libQt5Network5 libQt5OpenGL5 libQt5PrintSupport5 libQt5Sql5 libQt5Sql5-unixODBC libQt5Test5 libQt5Widgets5 libQt5Xml5 libqt5-qtbase-platformtheme-gtk2
- Fixed qt_instdate generation, so the Qt5Core library doesn't have
DATE embedded
- Drop fdupes usage as it provides unpredictable results, and fools
build-compare
- Add libqt5-qtbase-rpmlintrc due to duplicates waste warnings: we
rather have a few bytes more than to republish same binaries due
to fdupes
- Added make-qdbusxml2cpp-output-reproducible.patch: don't include
date/time in the generated include guards; prevents unnecessary
rebuilds
- Added fix-drag-and-drop-regression.patch from upstream,
fixes QTBUG-43436
==== libsmi ====
Subpackages: libsmi2
- fix missing pkgconfig buildRequires
- Run make check but ignore failures.
- libsmi-exports.patch: Export only the symbols of the public
API, specially hide and avoid using internal
vasprintf and asnprintf implementations that will
name-clash with the C library.
==== libstorage-ruby ====
Version update (2.25.18 -> 2.25.20)
- added commit callbacks (for fate#318392)
- 2.25.20
- Don't create gpt_sync_mbr on Power8, machine is capable to boot
from GPT (bsc#916935)
- 2.25.19
- restructured source files
==== libva-drm1 ====
Version update (1.4.1 -> 1.5.0)
Subpackages: libva-egl1 libva-glx1 libva-x11-1 libva1 vaapi-dummy-driver
- Update to version 1.5.0:
+ API:
- Add support for HEVC decoding.
- Extend JPEG encoding data structures and add configuration
attribute for JPEG encoding.
+ Add a unit test for JPEG encoding.
+ Add support for HEVC decoding and JPEG encoding in VA trace
utility.
+ Fix out of tree builds.
+ VA/X11: fix BadDrawable issue when calling vaTerminate() after
the pixmaps have been destroyed.
==== libvdpau_va_gl1 ====
- /etc/profile.d/libvdpau-va-gl.{csh,sh}: do not set VDPAU_DRIVER,
if NVIDIA's proprietary driver is installed
==== libxslt-devel ====
Subpackages: libxslt-tools libxslt1 libxslt1-32bit
- add 0009-Make-generate-id-deterministic.patch from debian's
reproducible builds project to avoid randomness in generated IDs
==== libyui-qt6 ====
Version update (2.46.15 -> 2.46.17)
- fix layout of Help and Release Notes buttons (bsc#916814)
(credits to tgoettlicher)
- 2.46.17
- include Help and Release notes buttons in keyboard shortcut
resolution (bsc#880983)
- 2.46.16
==== linux-glibc-devel ====
- Only removing /usr/include/scsi/scsi.h (bnc#834498)
==== lokalize ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== lskat ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== device-mapper ====
Subpackages: device-mapper-32bit lvm2
- LVM2 does not support unpartitioned DASD device which has special
format in the first 2 tracks and will siliently discards LVM2 lable
information written to it when pvcreate. (bsc#894202)
Add: dab3ebce-devices-Do-not-support-unpartitioned-DASD.patch
- Delete lvm2-lvmetad.socket from %service_del_preun/postun to avoid
lvmetad.service being started by 'systemctl retry-start' when updating
package. (bsc#914415)
==== man-pages ====
Version update (3.78 -> 3.79)
- update to 3.79:
- new and rewritten pages
* getrandom.2, kexec_load.2
- etc., see Changes for details
==== libastro1 ====
Version update (14.12.1 -> 14.12.2)
Subpackages: libmarblewidget20 marble marble-data marble-devel marble-doc
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== mdadm ====
- mdcheck-careful.patch
Be careful about reading all output of "mdadm --detail --export"
as shell commands - it isn't quoted.
(bnc#910500)
==== mkfontscale ====
Version update (1.1.1 -> 1.1.2)
- Update to version 1.1.2:
+ Remove extraneous duplicate checks for -r & -n options.
+ autogen.sh: Honor NOCONFIGURE=1.
+ configure: Drop AM_MAINTAINER_MODE.
+ Only include config.h if it exists.
+ Fix possible malloc allocation error found by clang static
analysis.
+ Plug a memory leak found by clang static analysis.
+ Print which option was in error along with usage message.
+ Make usage() always exit(1).
+ Add -v flag to print program version.
+ Add missing newline to usage output.
==== mobipocket ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== mozilla-nspr ====
Subpackages: mozilla-nspr-devel
- add the changes file as source so the .src.rpm builds (used for
fake build time)
==== libfreebl3 ====
Version update (3.17.3 -> 3.17.4)
Subpackages: libsoftokn3 mozilla-nss mozilla-nss-certs mozilla-nss-devel mozilla-nss-tools
- update to 3.17.4
* Firefox target release 36
Notable Changes:
* bmo#1084986: If an SSL/TLS connection fails, because client and
server don't have any common protocol version enabled,
NSS has been changed to report error code
SSL_ERROR_UNSUPPORTED_VERSION (instead of reporting
SSL_ERROR_NO_CYPHER_OVERLAP).
* bmo#1112461: libpkix was fixed to prefer the newest certificate,
if multiple certificates match.
* bmo#1094492: fixed a memory corruption issue during failure of
keypair generation.
* bmo#1113632: fixed a failure to reload a PKCS#11 module in FIPS
mode.
* bmo#1119983: fixed interoperability of NSS server code with a
LibreSSL client.
==== myspell-cs_CZ ====
Version update (20141215 -> 20150130)
Subpackages: myspell-da_DK myspell-de myspell-de_DE myspell-dictionaries myspell-el_GR myspell-en myspell-en_GB myspell-en_US myspell-es myspell-es_ES myspell-fr_FR myspell-hu_HU myspell-it_IT myspell-lightproof-en myspell-lightproof-hu_HU myspell-lightproof-pt_BR myspell-lightproof-ru_RU myspell-pl_PL myspell-pt_BR myspell-ru_RU
- git state 20150130
- fixed [bnc#914911]:
* gl: fixed dangling symlinks when gl_ES not installed
* de: _frami dropped from dictionaries name,
removed hyph_de.dic, th_de_v2.dat, th_de_v2.idx links from
myspell-de main language package (dangling when no
variant is installed)
* en: introduced dependenciencies between language subpackages
to not have dangling symlinks:
- all variants depends on en_US variant
- all except en_PH depends on en_GB
- en_MW, en_NA and en_ZW variants depends on en_ZA
* ca: ca-valencia.{dic,aff} regular files moved to
myspell-ca_ES_valencia
==== libnuma1 ====
Subpackages: numactl
- Change license from GPL-2.0+ to GPL-2.0
==== okular ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== openmpi-libs ====
- Pass a fixed branding string so that it doesn't contain the build
host (bnc#916027).
- Don't make testsuite noarch as then configure will fail.
==== libopenssl-devel ====
Subpackages: libopenssl1_0_0 libopenssl1_0_0-32bit openssl
- The DATE stamp moved from crypto/Makefile to crypto/buildinf.h,
replace it there (bsc#915947)
==== oxygen-icon-theme ====
Version update (14.12.1 -> 14.12.2)
- Update to KDE Applications 14.12.2
* KDE Applications 14.12.2
* See https://www.kde.org/announcements/announce-applications-14.12.2.php
==== p7zip ====
Version update (9.20.1 -> 9.38)
- update to 9.38
- patch #23 fixes "7z with unicode file name with surrogate pair is not handled well in Linux"
- bug #139 "password from commanline is visible in processes list"
Now the characters of the password are replaced with *.
- bug#138 If you extract the password with # program crashes
7z now supports long password in RAR 3 and 4.
- 7-Zip could ignore some options when you created ZIP archives.
For example, it could use ZipCrypto cipher instead of AES-256.
- New -mf=FilterID switch to specify compression filter. Examples:
7z a -mf=bcj2 a.7z a.tar
7z a -mf=delta:4 a.7z a.wav
7z a -mf=bcj a.tar.xz a.tar
- New class FString for file names at file systems.
- Speed optimization in CRC code for big-endian CPUs.
- Speed optimizations in AES code for Intel's 32nm CPUs.
- Speed optimizations in CRC calculation code for Intel's Atom CPUs.
- bug with multi archives which are links.
- #3283518 : Asm/x{32,64}/7zCrcT8U.asm introduces executable stack
==== patterns-openSUSE-apparmor ====
Subpackages: patterns-openSUSE-apparmor_opt patterns-openSUSE-base patterns-openSUSE-books patterns-openSUSE-console patterns-openSUSE-devel_C_C++ patterns-openSUSE-devel_basis patterns-openSUSE-devel_gnome patterns-openSUSE-devel_ide patterns-openSUSE-devel_java patterns-openSUSE-devel_kde patterns-openSUSE-devel_kernel patterns-openSUSE-devel_perl patterns-openSUSE-devel_python patterns-openSUSE-devel_qt4 patterns-openSUSE-devel_rpm_build patterns-openSUSE-devel_ruby patterns-openSUSE-devel_web patterns-openSUSE-dhcp_dns_server patterns-openSUSE-directory_server patterns-openSUSE-enhanced_base patterns-openSUSE-enhanced_base_opt patterns-openSUSE-file_server patterns-openSUSE-fonts patterns-openSUSE-fonts_opt patterns-openSUSE-games patterns-openSUSE-gateway_server patterns-openSUSE-gnome patterns-openSUSE-gnome_admin patterns-openSUSE-gnome_basis patterns-openSUSE-gnome_basis_opt patterns-openSUSE-gnome_games patterns-openSUSE-gnome_ide patterns-openSUSE-gnome_imaging patterns-ope
nSUSE-gnome_imaging_opt patterns-openSUSE-gnome_internet patterns-openSUSE-gnome_laptop patterns-openSUSE-gnome_multimedia patterns-openSUSE-gnome_multimedia_opt patterns-openSUSE-gnome_office patterns-openSUSE-gnome_office_opt patterns-openSUSE-gnome_utilities patterns-openSUSE-gnome_yast patterns-openSUSE-imaging patterns-openSUSE-imaging_opt patterns-openSUSE-kde patterns-openSUSE-kde4_admin patterns-openSUSE-kde4_basis patterns-openSUSE-kde4_edutainment patterns-openSUSE-kde4_games patterns-openSUSE-kde4_ide patterns-openSUSE-kde4_imaging patterns-openSUSE-kde4_internet patterns-openSUSE-kde4_laptop patterns-openSUSE-kde4_multimedia patterns-openSUSE-kde4_office patterns-openSUSE-kde4_utilities patterns-openSUSE-kde4_utilities_opt patterns-openSUSE-kde4_yast patterns-openSUSE-kvm_server patterns-openSUSE-lamp_server patterns-openSUSE-laptop patterns-openSUSE-lxde patterns-openSUSE-lxde_laptop patterns-openSUSE-lxde_office patterns-openSUSE-mail_server patterns-openSUSE-minimal_b
ase patterns-openSUSE-minimal_base-conflicts patterns-openSUSE-misc_server patterns-openSUSE-multimedia patterns-openSUSE-multimedia_opt patterns-openSUSE-network_admin patterns-openSUSE-non_oss patterns-openSUSE-non_oss_opt patterns-openSUSE-office patterns-openSUSE-office_opt patterns-openSUSE-print_server patterns-openSUSE-remote_desktop patterns-openSUSE-rest_dvd patterns-openSUSE-sw_management patterns-openSUSE-sw_management_gnome patterns-openSUSE-sw_management_kde4 patterns-openSUSE-tabletpc patterns-openSUSE-technical_writing patterns-openSUSE-x11 patterns-openSUSE-x11_opt patterns-openSUSE-x11_yast patterns-openSUSE-xen_server patterns-openSUSE-xfce patterns-openSUSE-xfce_basis patterns-openSUSE-xfce_laptop patterns-openSUSE-xfce_office patterns-openSUSE-yast2_basis patterns-openSUSE-yast2_install_wf
- Add some new packages to plasma 5 pattern: konsole5, kwrite5,
kmix5 (boo#907604), kcm-touchpad5
==== perl-B-Hooks-EndOfScope ====
Version update (0.13 -> 0.14)
- updated to 0.14
- line numbers in shipped code are now the same as the repository source,
for easier debugging
- more accurate dynamic prereq declarations
==== perl-Bootloader ====
Version update (0.829 -> 0.830)
Subpackages: perl-Bootloader-YAML
- Initialize GRUB_USE_LINUXEFI from target setting
- 0.830
==== perl-Capture-Tiny ====
Version update (0.25 -> 0.27)
- updated to 0.27
Prereqs:
- Make Inline::C recommended, not required
Tests:
- Actually check for Inline::C in tests, not just Inline
==== perl-Class-Load-XS ====
Version update (0.08 -> 0.09)
- updated to 0.09
- optimized some perl API calls (thanks, Alexandr Evstigneev!)
==== perl-Class-Tiny ====
Version update (1.000 -> 1.001)
- updated to 1.001
[ADDED]
- Added support for BUILDARGS for Moo(se) compatibility
[INTERNAL]
- Implements BUILDALL via method (was inline) for Moo(se) compatibility
==== perl-Compress-Bzip2 ====
Version update (2.18 -> 2.20)
- updated to 2.20
- fixed generated SIGNATURE (EUMM parallel make issue)
2.20 2015-01-15 rurban
- Convert README to markdown, mention the preferred IO::Compress::Bzip2 in
the docs (done by Pattarawat Chormai, GH PR #2)
==== perl-Crypt-OpenSSL-Random ====
Version update (0.04 -> 0.10)
- updated to 0.10
- fix LIBS argument, fatal on Windows. thanks to kmx
0.09 2015-02-04 rurban
- add missing hints/MSWin32.pl (kmx, RT #56455)
- add a couple of distro tests
- fix gcov target
0.08 2015-02-03 rurban
- remove Devel::CheckLib which does not work for 2 required libs
- replace DynaLoader by XSLoader
0.07 2015-02-03 rurban
- Bump version to publish an official release
0.06 rurban
- Typo in doc (dsteinbrunner)
0.05 2013-04-02 14:31:30 rurban
- Add inc/Devel/CheckLib, improve POD, add README and some helper targets
- Better diagnostics when the openssl libraries are not found
- Support INCDIR= and LIBDIR= arguments to Makefile.PL
- Add MSWin32 hints to find the openssl libraries
- Autocreate README
- Fix some -Wpointer-sign warnings
- Remove wrong Crypt::OpenSSL::RSA package names in docs and errmsg
==== perl-Dist-CheckConflicts ====
Version update (0.10 -> 0.11)
- updated to 0.11
- drop the dep on List::MoreUtils (haarg, #8)
==== perl-Encode-HanExtra ====
- sort the entries in HanExtra.c for consistent packaging
(boo#915951):
HanExtra-include-sort.patch
==== perl-ExtUtils-Depends ====
Version update (0.401 -> 0.404)
- updated to 0.404
- Depends.pm: sort deps in save_config() and get_makefile_vars(); patch
submitted by Debian's reproducible build team for RT#101602
- Use / to make ::load filename, not File::Spec - perldoc -f require
0.403
- Avoid using Test::More::done_testing() for to support building
out-of-the-box on older perls.
0.402 Sat Oct 18 18:06:19 EEST 2014
- Set Data::Dumper::Sortkeys = 1 in ExtUtils::Depends->save_config();
patch submitted by Niko Tyni of the Debian Perl Group; fixes RT#99260
==== perl-File-Tail ====
Version update (0.99.3 -> 1.0)
- updated to 1.0
* Actually just two minor bug fixes (one of them in a test), but I no
longer see a point in not having a 1.0 version.
==== perl-Net-SSLeay ====
Version update (1.64 -> 1.68)
- updated to 1.68
Fixed a problem on OSX when macports openssl 1.x is installed: headers from
macport were found but older OSX openssl libraries were linked, resulting
in "Symbol not found: _EVP_MD_do_all_sorted".
Added notes about runtime error "no OPENSSL_Applink", when calling
Net::SSLeay::P_PKCS12_load_file.
1.67 2015-01-17
Improvements to inc/Module/Install/PRIVATE/Net/SSLeay.pm to handle the
case whe there are muliple OPENSSLs installed. Patch from HBRAND
Fixed a documentation error in get_peer_cert_chain, reported by tejas.
Fixed a problem with building on Windows that prevented correct OpenSSL
directory detection with version 1.0.1j as delivered with Shining Light OpenSSL.
Fixed a problem with building on Windows that prevented finding MT or MD
versions of SSL libraries.
Updated doc in README.Win32 to build with Microsoft Visual Studio 2010 Express.
Added Windows crypt32 library to Windows linking as some compilers/platforms seem to
require it and it is innocuous otherwise. For Steve Hay.
Fixed a failure in t/external/20_cert_chain.t where some platforms do not
have HTTPS in /etc/services. Reported and patched by Gisle Aas.
Recent 1.0.2 betas have dropped the SSLv3_method function.
This patch leaves out the function on newer versions, much the same as
the SSLv2 deprecation is handled. Patch from Tom Molesworth.
Fix the ALPN test, which was incorrectly failing on OpenSSL due to the
LibreSSL check (earlier versions bailed out before that line).Patch from
Tom Molesworth.
1.66 2014-08-21
Fixed compile problem with perl prior to 5.8.8, similar to
RT#76267. Reported by Graham Knop.
Fixed a problem with Socket::IPPROTO_TCP on early perls.
After discussions with the community and the original author Sampo
Kellomaki, the license conditions have been changed to "Perl Artisitic
License 2.0".
1.65 2014-07-14
Added note to doc to make it clear that X509_get_subjectAltNames returns a
packed binary IP address for type 7 - GEN_IPADD.
Improvements to SSL_OCSP_response_verify to compile under non c99
compilers. Requested by MERIJNB.
Port to Android, contributed by Brian Fraser. Includes Android specific
version of RSA_generate_key.
Added LibreSSL support, patch provided by Alexander Bluhm. Thanks!
Patch that fixes the support for SSL_set_info_callback and adds
SSL_CTX_set_info_callback and SSL_set_state. Support for these functions is
necessary to either detect renegotiation or to enforce
renegotiation. Contributed by Steffen Ullrich. Thanks!
Fixed a problem with SSL_set_state not available on some early OpenSSLs,
patched by Steffen Ullrich. Thanks!
Removed arbitrary size limits from calls to tcp_read_all in tcpcat() and
http_cat().
Removed unnecessary Debian_SPANTS.txt from MANIFEST. Again.
- avoid prompts in terminals
==== perl-Sys-Hostname-Long ====
Version update (1.4 -> 1.5)
- updated to 1.5
Improvements by Michiel Bejen
pyzy-db-android pyzy-db-open-phrase xf86-video-modesetting xf86-video-v4l
gstreamer-plugin-gstclutter-3_0 libclutter-gst-3_0-0 typelib-1_0-ClutterGst-3_0 gstreamer-plugins-base-devel typelib-1_0-GstAllocators-1_0 typelib-1_0-GstApp-1_0 typelib-1_0-GstFft-1_0 typelib-1_0-GstRiff-1_0 typelib-1_0-GstRtp-1_0 typelib-1_0-GstRtsp-1_0 typelib-1_0-GstSdp-1_0 java-1_9_0-openjdk java-1_9_0-openjdk-headless
Added packages: clutter-gst-devel libmusicbrainz5-1 libpinyin5 libsrtp-1_5_0 libstorage6 perl-Text-Unidecode perl-libintl-perl powertop-lang libprocps4 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org