Mailinglist Archive: opensuse-factory (753 mails)

< Previous Next >
Re: [opensuse-factory] Apache: The connection was refused when attempting to contact 127.0.0.1
On Mon, 20 Aug 2012 16:24:04 +0200, "Dominique Leuenberger a.k.a DimStar"
<DimStar@xxxxxxxxxxxx> wrote:
Quoting doiggl@xxxxxxxxxxxxxxxxxx:

On Mon, 20 Aug 2012 21:29:25 +1000, <doiggl@xxxxxxxxxxxxxxxxxx> wrote:
On Mon, 20 Aug 2012 11:34:39 +0200, "Dominique Leuenberger a.k.a
DimStar"
<DimStar@xxxxxxxxxxxx> wrote:
Quoting "Dominique Leuenberger a.k.a DimStar" <DimStar@xxxxxxxxxxxx>:

Quoting doiggl@xxxxxxxxxxxxxxxxxx:

Hello
How do I get apache going on localhost[127.0.0.1]
opensuse x86_64 factory 12.2 rc2

How can I get this service going?
Thanks Glenn

rcapach2 start ?

sorry.. clumsy fingers.. make that an
rcapache2 start
(I'm sure you figured that).

Dominique

Hello,
Thanks for the info. Here are the results of the commands:
# rcapache2 start
redirecting to systemctl
Job failed. See system journal and 'systemctl status' for details.

# systemctl status
Too few arguments.

What do I check next?
Thanks Glenn
I found this command after some searching, and its result. --Glenn
# systemctl status apache2.service
apache2.service - apache
Loaded: loaded (/lib/systemd/system/apache2.service; enabled)
Active: failed (Result: exit-code) since Mon, 20 Aug 2012
23:51:53 +1000; 20min ago
Process: 1395 ExecStart=/usr/sbin/start_apache2 -D SYSTEMD -k
start (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/apache2.service

Aug 20 23:51:53 orac start_apache2[1395]: httpd2-worker: Syntax error
on
line 205 of /etc/apache2/httpd.conf: Sy...osed.

# head -205 /etc/apache2/httpd.conf | tail -5

#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
Include /etc/apache2/vhosts.d/*.conf

So using the apache 'standard' debug methods might help you:

try
apachectl -T
or
httpd -t -f /etc/apache2/httpd.conf

Let's see what we get.

Hello,
Results as follows and attaching files -Glenn
- /etc/apache2/httpd.conf
- /etc/apache2/vhosts.d/cacti.conf

# apache2ctl -T
httpd2: Syntax error on line 205 of /etc/apache2/httpd.conf: Syntax error
on line 1 of /etc/apache2/vhosts.d/cacti.conf:
/etc/apache2/vhosts.d/cacti.conf:1: <?php> was not closed.

#
# /etc/apache2/httpd.conf
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.2/> for detailed information about
# the directives.

# Based upon the default apache configuration file that ships with apache,
# which is based upon the NCSA server configuration files originally by Rob
# McCool. This file was knocked together by Peter Poeml <poeml+apache@xxxxxxx>.

# If possible, avoid changes to this file. It does mainly contain Include
# statements and global settings that can/should be overridden in the
# configuration of your virtual hosts.

# Quickstart guide:
# http://en.opensuse.org/Apache_Quickstart_HOWTO


# Overview of include files, chronologically:
#
# httpd.conf
# |
# |-- uid.conf . . . . . . . . . . . . . . UserID/GroupID to run under
# |-- server-tuning.conf . . . . . . . . . sizing of the server (how many
processes to start, ...)
# |-- sysconfig.d/loadmodule.conf . . . . . [*] load these modules
# |-- listen.conf . . . . . . . . . . . . . IP adresses / ports to listen on
# |-- mod_log_config.conf . . . . . . . . . define logging formats
# |-- sysconfig.d/global.conf . . . . . . . [*] server-wide general settings
# |-- mod_status.conf . . . . . . . . . . . restrict access to mod_status
(server monitoring)
# |-- mod_info.conf . . . . . . . . . . . . restrict access to mod_info
# |-- mod_usertrack.conf . . . . . . . . . defaults for cookie-based user
tracking
# |-- mod_autoindex-defaults.conf . . . . . defaults for displaying of
server-generated directory listings
# |-- mod_mime-defaults.conf . . . . . . . defaults for mod_mime
configuration
# |-- errors.conf . . . . . . . . . . . . . customize error responses
# |-- ssl-global.conf . . . . . . . . . . . SSL conf that applies to default
server _and all_ virtual hosts
# |
# |-- default-server.conf . . . . . . . . . set up the default server that
replies to non-virtual-host requests
# | |--mod_userdir.conf . . . . . . . . enable UserDir (if mod_userdir is
loaded)
# | `--conf.d/apache2-manual?conf . . . add the docs ('?' = if installed)
# |
# |-- sysconfig.d/include.conf . . . . . . [*] your include files
# | (for each file to be included
here, put its name
# | into APACHE_INCLUDE_* in
/etc/sysconfig/apache2)
# |
# `-- vhosts.d/ . . . . . . . . . . . . . . for each virtual host, place one
file here
# `-- *.conf . . . . . . . . . . . . . (*.conf is automatically
included)
#
#
# Files marked [*] are created from sysconfig upon server restart: instead of
# these files, you edit /etc/sysconfig/apache2



# Filesystem layout:
#
# /etc/apache2/
# |-- charset.conv . . . . . . . . . . . . for mod_auth_ldap
# |-- conf.d/
# | |-- apache2-manual.conf . . . . . . . conf that comes with apache2-doc
# | |-- mod_php4.conf . . . . . . . . . . (example) conf that comes with
apache2-mod_php4
# | `-- ... . . . . . . . . . . . . . . . other configuration added by
packages
# |-- default-server.conf
# |-- errors.conf
# |-- httpd.conf . . . . . . . . . . . . . top level configuration file
# |-- listen.conf
# |-- magic
# |-- mime.types -> ../mime.types
# |-- mod_autoindex-defaults.conf
# |-- mod_info.conf
# |-- mod_log_config.conf
# |-- mod_mime-defaults.conf
# |-- mod_perl-startup.pl
# |-- mod_status.conf
# |-- mod_userdir.conf
# |-- mod_usertrack.conf
# |-- server-tuning.conf
# |-- ssl-global.conf
# |-- ssl.crl/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificate
Revocation Lists (CRL)
# |-- ssl.crt/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificates
# |-- ssl.csr/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificate
Signing Requests
# |-- ssl.key/ . . . . . . . . . . . . . . PEM-encoded RSA Private Keys
# |-- ssl.prm/ . . . . . . . . . . . . . . public DSA Parameter Files
# |-- sysconfig.d/ . . . . . . . . . . . . files that are created from
/etc/sysconfig/apache2
# | |-- global.conf
# | |-- include.conf
# | `-- loadmodule.conf
# |-- uid.conf
# `-- vhosts.d/ . . . . . . . . . . . . . . put your virtual host
configuration (*.conf) here
# |-- vhost-ssl.template
# `-- vhost.template



### Global Environment ######################################################
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests.

# run under this user/group id
Include /etc/apache2/uid.conf

# - how many server processes to start (server pool regulation)
# - usage of KeepAlive
Include /etc/apache2/server-tuning.conf

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/apache2/error_log

# generated from APACHE_MODULES in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/loadmodule.conf

# IP addresses / ports to listen on
Include /etc/apache2/listen.conf

# predefined logging formats
Include /etc/apache2/mod_log_config.conf

# generated from global settings in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/global.conf

# optional mod_status, mod_info
Include /etc/apache2/mod_status.conf
Include /etc/apache2/mod_info.conf

# optional cookie-based user tracking
# read the documentation before using it!!
Include /etc/apache2/mod_usertrack.conf

# configuration of server-generated directory listings
Include /etc/apache2/mod_autoindex-defaults.conf

# associate MIME types with filename extensions
TypesConfig /etc/apache2/mime.types
DefaultType text/plain
Include /etc/apache2/mod_mime-defaults.conf

# set up (customizable) error responses
Include /etc/apache2/errors.conf

# global (server-wide) SSL configuration, that is not specific to
# any virtual host
Include /etc/apache2/ssl-global.conf

# forbid access to the entire filesystem by default
<Directory />
Options None
AllowOverride None
Order deny,allow
Deny from all
</Directory>

# use .htaccess files for overriding,
AccessFileName .htaccess
# and never show them
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>

# List of resources to look for when the client requests a directory
DirectoryIndex index.html index.html.var

### 'Main' server configuration #############################################
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
Include /etc/apache2/default-server.conf


# Another way to include your own files
#
# The file below is generated from /etc/sysconfig/apache2,
# include arbitrary files as named in APACHE_CONF_INCLUDE_FILES and
# APACHE_CONF_INCLUDE_DIRS
Include /etc/apache2/sysconfig.d/include.conf


### Virtual server configuration ############################################
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
Include /etc/apache2/vhosts.d/*.conf


# Note: instead of adding your own configuration here, consider
# adding it in your own file (/etc/apache2/httpd.conf.local)
# putting its name into APACHE_CONF_INCLUDE_FILES in
# /etc/sysconfig/apache2 -- this will make system updates
# easier :)
<?php
/*
+-------------------------------------------------------------------------+
| Copyright (C) 2004-2011 The Cacti Group |
| |
| This program is free software; you can redistribute it and/or |
| modify it under the terms of the GNU General Public License |
| as published by the Free Software Foundation; either version 2 |
| of the License, or (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
+-------------------------------------------------------------------------+
| Cacti: The Complete RRDTool-based Graphing Solution |
+-------------------------------------------------------------------------+
| This code is designed, written, and maintained by the Cacti Group. See |
| about.php and/or the AUTHORS file for specific developer information. |
+-------------------------------------------------------------------------+
| http://www.cacti.net/ |
+-------------------------------------------------------------------------+
*/

/* make sure these values refect your actual database/host/user/password */
$database_type = "mysql";
$database_default = "cactidb";
$database_hostname = "localhost";
$database_username = "cacti";
$database_password = "cacti";
$database_port = "3306";
$database_ssl = false;

/*
Edit this to point to the default URL of your Cacti install
ex: if your cacti install as at http://serverip/cacti/ this
would be set to /cacti/
*/
$url_path = "/";

/* Default session name - Session name must contain alpha characters */
$cacti_session_name = "Cacti";

?>
< Previous Next >