Hi, again I have massive problems with the openSUSE-installation on my Lenovo ThinkCentre M58p 6234-1AG (C2D E8400, Q45 Express, GMA 4500, 82567LM-3, kernel driver in use: i915). After the update of the openSUSE 11.3-installation today, the system is not booting with the Xen-kernel anymore. Unfortunately the vga-mode-settings in the menu.lst where changed wrong by the update, I corrected the settings, but I was not able to get the server up and running with the Xen-kernel. Finaly I made a distribution update to 11.4 Milestone 5. The result was not too bad, the system booted the standard kernel (2.6.37-desktop) without problems and seems to run fine. The grub-entry for the xen-kernel in the menu.lst was wrong and I corrected it again: title Xen -- openSUSE 11.4 Milestone 5 of 6 - 2.6.37 root (hd0,0) #kernel /xen.gz vga=mode-0x317 vga=mode-0x317 kernel /xen.gz vga=mode-0x317 module /vmlinuz-2.6.37-xen root=/dev/sda6 resume=/dev/sda2 splash=silent quiet showopts vga=0x317 module /initrd-2.6.37-xen But if I select the Xen-kernel, the system is still not booting, there is only a short flickering on the screen, then the system reboots. I already tried to change the "vga"-options to "0xF00", "normal", remove it, set "splash=0" and "nomodeset", but without a change. Any other idea? Thanks a lot. -- Chau y hasta luego, Thorolf -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org