Hi, I just inistalled a brand new machine with 11Rc1. It has a Marvell 88SE6145 SataII kontroller. It seems that 11.0RC1 identifies this as a PATA device as the driver loaded is pata_marvell. Should it not be the sata_mv driver that should be loaded? (ref. information here : http://linux-ata.org/driver-status.html#marvell) hwinfo: 100: udi = '/org/freedesktop/Hal/devices/pci_11ab_6145' pci.vendor_id = 4523 (0x11ab) linux.subsystem = 'pci' info.subsystem = 'pci' info.linux.driver = 'pata_marvell' pci.subsys_product_id = 33462 (0x82b6) info.product = '88SE6145 SATA II PCI-E controller' pci.subsys_vendor_id = 4163 (0x1043) info.udi = '/org/freedesktop/Hal/devices/pci_11ab_6145' pci.device_class = 1 (0x1) pci.device_subclass = 1 (0x1) pci.device_protocol = 143 (0x8f) pci.vendor = 'Marvell Technology Group Ltd.' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.4/0000:02:00.0' info.vendor = 'Marvell Technology Group Ltd.' info.parent = '/org/freedesktop/Hal/devices/pci_8086_2948' pci.product = '88SE6145 SATA II PCI-E controller' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.4/0000:02:00.0' pci.subsys_vendor = 'ASUSTeK Computer Inc.' pci.product_id = 24901 (0x6145) linux.hotplug_type = 2 (0x2) Kind Regards Birger --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org