Hello! I have tested the KDE-Live-CD on a Samsung P35 and found some issues (which I did not find reported jet). Most of them are really hardware specific, so I do not know, if I should fill bug-reports. The boot-loader wants to boot with a resolution of 1024x768. So I changed to the native resolution of 1400x1050. After boot entering sax2, it tells me that my monitor has 17.1 inches and a 5/4 ratio, where it has 15 inches and a 4/3 ratio. I have a Radeon mobility 9700 (RV350 NP) . I can activate 3D acceleration in sax2 with the radeon-driver. But in sysinfo in always says no 3D acceleration, whereas glxgears always works! This Notebook has no entry in the 2ram whitelist. I did not manage to suspend with the options from http://de.opensuse.org/S2ram (I did not try all). But under 10.2 it works very well with the radeon-driver, radeonfb and vga=normal video=vesa:off and only -f. Best regards, Christian --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org