Mailinglist Archive: opensuse-factory (1165 mails)

< Previous Next >
[opensuse-factory] DVD/CD writer problems with openSuse 10.2 beta 1
  • From: Viljo Mustonen <viljo.mustonen@xxxxxxxxxx>
  • Date: Wed, 01 Nov 2006 23:48:33 +0200
  • Message-id: <45491631.7040804@xxxxxxxxxx>

I have Compaq Evo W4000 workstation with LG GSA-4167B
DVD-writer as master and LITEON LTR-40125S CD-writer
as slave at secondary IDE bus. Both devices works well
with openSuse 10.1 and W2k. Boot time is about 1 minute.

With openSuse 10.2 beta 1 here is problems. LITEON does
not work. LG mostly reads but not writes properly,auto
mount often does not work.Boot time to login screen is
very long, between 2 minutes 40 seconds and nearly
5 minutes.

Boot.msg:s typically contains lines:

<6>scsi1 : ata_piix
<6>ata2.00: ATAPI, max UDMA/33
<6>ata2.01: ATAPI, max UDMA/33
<6>ata2.00: configured for UDMA/33
<4>ata2.01: qc timeout (cmd 0xef)
<3>ata2.01: failed to set xfermode (err_mask=0x4)
<4>ata2.01: limiting speed to UDMA/25
<4>ata2: failed to recover some devices, retrying in 5 secs
<6>ata2.00: configured for UDMA/33
<4>ata2.01: qc timeout (cmd 0xef)
<3>ata2.01: failed to set xfermode (err_mask=0x4)
<4>ata2.01: limiting speed to PIO0
<4>ata2: failed to recover some devices, retrying in 5 secs
<6>ata2.00: configured for UDMA/33
<4>ata2.01: qc timeout (cmd 0xef)
<3>ata2.01: failed to set xfermode (err_mask=0x4)
<4>ata2.01: disabled
<4>ata2: failed to recover some devices, retrying in 5 secs
<3>ata2.00: failed to set xfermode (err_mask=0x40)
<4>ata2.00: limiting speed to UDMA/25
<4>ata2: failed to recover some devices, retrying in 5 secs
<6>ata2.00: configured for UDMA/25

Often three times more same kinds of lines.

--

Viljo

---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-factory+help@xxxxxxxxxxxx

< Previous Next >
Follow Ups