Hi, Yesterday I tried to install Beta3 on a system having a software RAID1 and LVM. LVM works fine, RAID1 doesn't :-( I was upgrading a 10.0 system. I made a DVD from the 5CDs and I began to install it. Everything was fine. RAID was recognized, LVM also, no problem with upgrading from 10.0 to 10.1 Beta3, only a manual intervention for packages from community repositories (something normal). At the first reboot, unfortunately I got these: md: md0 stopped /init: line 479: 736 segmentation fault /sbin/mdadm -- assemble --scan $mdconf rootfs: major=9 minor=0 devn=2304 /dev/md0: unknown volume type /init: line 512: =: command not found Mounting root /dev/md0 mount: unknown filesystem type '' umount: /dev: device is busy umount: /dev: device is busy Kernel panic - not syncing: Attemted to kill init! After this, I tried to make a clean install. I formated the raid and install it again, again with no problems. At the first reboot, the same problem (the first reboot means before you set the root password, user accounts, networking, etc). Is this a known problem or should I report it to bugzilla? Cheers, -- Liviu Damian Phone: +40741226993 Blog: http://liviudm.blogspot.com