Hola:
En la respuesta anterior se te sugiere probar WPA. WPA-PSK puede ser la opción mas parecida a lo que ya tienes.
poniéndole WPA-PSK al router me dice lo siguiente: steele:/home/rleal # rcnetwork restart Shutting down network interfaces: eth0 device: Broadcom Corporation NetLink BCM5787M Gigabit Etdoneet PCI Express (rev 02) wlan0 device: Intel Corporation PRO/Wireless 3945ABG Network Cdonection (rev 02) Shutting down service network . . . . . . . . . . . . . done Hint: you may set mandatory devices in /etc/sysconfig/network/config Setting up network interfaces: lo lo IP address: 127.0.0.1/8 IP address: 127.0.0.2/8 done eth0 device: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) eth0 (DHCP) . . . . . IP/Netmask: '192.168.1.33' / '255.255.2done' ('dhcppc31') wlan0 device: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) wlan0 warning: WPA configured but may be unsupported wlan0 warning: by this device wlan0 starting wpa_supplicant WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported wlan0 (DHCP) . . . . . . . . . . . . . . . no IP address yet..waitingrounding. Setting up service network . . . . . . . . . . . . . . done SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... SuSEfirewall2: using default zone 'ext' for interface wmaster0 SuSEfirewall2: batch committing... SuSEfirewall2: Firewall rules successfully se O sea, que tampoco.. Tb intenté sin encriptado, sin resultado. wlan0 device: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) wlan0 warning: using NO encryption command 'iwconfig wlan0 nick steele' returned Error for wireless request "Set Nickname" (8B1C) : SET failed on device wlan0 ; Operation not supported. wlan0 (DHCP) . . . . . . . . . . . . . . . no IP address yet..waitingrounding. Setting up service network . . . . . . . . . . . . . . done SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... SuSEfirewall2: using default zone 'ext' for interface wmaster0 SuSEfirewall2: batch committing... SuSEfirewall2: Firewall rules successfully set
steele:/home/rleal # ifconfig eth0 Link encap:Ethernet HWaddr 00:1E:68:0A:D1:1C inet addr:192.168.1.33 Bcast:192.168.1.255 Mask:255.255.255.0 ... wlan0 Link encap:Ethernet HWaddr 00:1C:BF:A6:61:44 inet addr:192.168.1.33 Bcast:192.168.1.255 Mask:255.255.255.0
Pregunta tonta... ¿Porque pones la misma ip/mascara en las 2 interfaces? ¿No daría esto problemas de enrutamiento de paquetes? ¿Que te dice "route"? Entiendo que las pones tu. El servidor DHCP del router no haría eso.
Sí, gran error. También he probado con DHCP, desactivando eth0,... pero tampoco. El problema es bastante similar a lo que dice aquí (http://forums.opensuse.org/network-internet/wireless/390252-open-suse-11-int...) o aquí (http://forums.opensuse.org/network-internet/394571-problem-wireless-network-...) No pienso que sea por eso. Qué es eso de command 'iwconfig wlan0 nick steele' returned Error for wireless request "Set Nickname" (8B1C) : SET failed on device wlan0 ; Operation not supported. ?? Saludos, r.- -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org