¡Buenos días lista! Tengo un portátil Acer TravelMate 4002WLMi con OpenSUSE 10.2 y quiero ver el estado de la batería. He copiado el archivo dsdt.aml en /etc/mkinitrd/DSDT. El archivo dsdt.aml lo he sacado de /proc/acpi/dsdt y en el menu.lst del cargador de arranque pone esto (en algún lado he leído que debera de poner "noapci" por algun lado): kernel /boot/vmlinuz-2.6.18.2-34-default root=/dev/hda4 vga=0x317 acpi=force resume=/dev/hda6 splash=silent showopts initrd /boot/initrd-2.6.18.2-34-default Tambien he leído que debería de modificar algo en el archivo kernel que esta en /etc/sysconfig donde pone esto: MODULES_LOADED_ON_BOOT="" ## Type: string ## Default: "" # # The file name of a binary ACPI Differentiated System Description Table # (DSDT). This table is appended to the initial ram disk (initrd) that # the mkinitrd script creates. If the kernel finds that its initrd # contains a DSDT, this table replaces the DSDT of the bios. If the file # specified in ACPI_DSDT is not found or ACPI_DSDT is empty/not specified, # no DSDT will be appended to the initrd. # Example path /etc/acpi/dsdt # ACPI_DSDT="" ## Type: integer(1000:50000) ## Default: 1000 # # Length of the shortest timeslice a process (with lowest priority / maximum # niceness) will be running on a CPU. Time is given in microseconds (us). # This time should be much shorter than SCHED_MAXTIMESLICE to keep the # nice values meaningful. The values can only be specified up to a accuracy # of 1/HZ s, i.e. 10000us on a HZ=100 system, 1000us if HZ=1000. # Note that the boot script (boot.sched) does scale the values if the # MINTIMESLICE is below the minimum for the timer interrupt frequency (HZ # value) of the booted kernel. # For interactive desktop use, SCHED_MINTIMESLICE/SCHED_MAXTIMESLICE values # of 1000 and 30000 are recommended. For non-interactive use, multiply both # values by 10 or 20. # ¿Alguien puede ayudarme? P.D.: En pruebas anteriores, con kubuntu 6.10 funcionaba correctamente sin tocar nada tras instalar. --------------------------------------------------------------------- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org