El Miércoles, 3 de Enero de 2007 13:13, Camaleón escribió:
2007/1/3, Octavio Ávalos:
Trying fax device '/dev/ttyS0'... cannot set termio values! /usr/sbin/sendfax: cannot access fax device(s) (locked?) command exited with status 2
No encuentra nada con qué comunicarse. Pon ttyS1 que es donde sí encuentra algo pero no le gusta.
Si no es muy largo, pon el contenido completo del fichero "mgetty.config" para ver los parámetros de iniciación del módem.
Saludos,
Contenido del fichero mgetty.config: # # mgetty configuration file # # this is a sample configuration file, see mgetty.info for details # # comment lines start with a "#", empty lines are ignored # ----- global section ----- # # In this section, you put the global defaults, per-port stuff is below # set the global debug level to "4" (default from policy.h) debug 4 # set the local fax station id fax-id 34 981 351878 # access the modem(s) with 38400 bps speed 38400 # use these options to make the /dev/tty-device owned by "uucp.uucp" # and mode "rw-rw-r--" (0664). *LEADING ZERO NEEDED!* #port-owner uucp #port-group uucp #port-mode 0664 # use these options to make incoming faxes owned by "root.uucp" # and mode "rw-r-----" (0640). *LEADING ZERO NEEDED!* #fax-owner root #fax-group uucp #fax-mode 0640 # ----- port specific section ----- # # Here you can put things that are valid only for one line, not the others # # Zoom V.FX 28.8, connected to ttyS0: don't do fax, less logging # #port ttyS0 # debug 3 # data-only y # some other Rockwell modem, needs "switchbd 19200" to receive faxes # properly (otherwise it will fail with "timeout"). # port ttyS1 speed 38400 switchbd 19200 # ZyXEL 2864, connected to ttyS2: maximum debugging, grab statistics # #port ttyS2 # debug 8 # init-chat "" \d\d\d+++\d\d\dAT&FS2=255 OK ATN3S0=0S13.2=1 OK # statistics-chat "" AT OK ATI2 OK # statistics-file /var/log/statistics.ttyS2 # modem-type cls2 # direct connection of a VT100 terminal which doesn't like DTR drops # ("direct" meaning "*no* *modem*". NEVER enable "direct yes" on modem lines!) # #port ttyS3 # direct y # speed 19200 # toggle-dtr n Un saludo -- Octavio Ávalos --------------------------------------------------------------------- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org