Puedes correr glxinfo y poner aqui lo que te da? Quizas la nueva
version (la beta) 1.0-9xxxx arregle el problema. Tambien algo que me
ha ayudado es correr sax2 -r o sax2 -m 0=nvidia para que la
configuracion del xorg.conf se reinicialice. Y lo que nunca esta por
demas... reiniciar la maquina despues de que el controlador fue
instalado... solo algunas sugerencias que me han ayudado en el pasado
Saludos,
On 10/20/06, Carlos E. R.
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hola:
Se me ha ocurrido compilar y probar el FlighGear (el simulador de vuelo) que ya no viene incluido en la distribución. Para ello el primer paso ha sido bajarme e instalar el driver de nvidia, en este caso el NVIDIA-Linux-x86-1.0-8776-pkg1.run. Luego activarlo en el xorg.conf igual que hice muchas veces en el pasado.
Reinicio, veo el logotipo de nvida, y tal. Pruebo con "glxgears":
cer@nimrodel:~> glxgears 3596 frames in 5.0 seconds = 719.072 FPS 4023 frames in 5.0 seconds = 804.191 FPS 4011 frames in 5.0 seconds = 802.194 FPS
Las ruedecitas girando lentamente, y la CPU al ciento por ciento. Esto no es normal.
Es un Pentium 4 a 1800 con 1 giga de ram. Con la SuSE 9.3 conseguía mejor rendimiento. La tarjeta es una GeForce2 MX/MX 400.
/var/log/Xorg.0.log:
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "NvAGP" "3" (**) NVIDIA(0): Option "Rotate" "off" (**) NVIDIA(0): Enabling RENDER acceleration (**) NVIDIA(0): Disabling static screen rotation. (II) NVIDIA(0): NVIDIA GPU GeForce2 MX/MX 400 at PCI:1:0:0 (--) NVIDIA(0): VideoRAM: 65536 kBytes (--) NVIDIA(0): VideoBIOS: 03.11.01.24.87 (II) NVIDIA(0): Detected AGP rate: 4X (--) NVIDIA(0): Interlaced video modes are not supported on this GPU (--) NVIDIA(0): Connected display device(s) on GeForce2 MX/MX 400 at (--) NVIDIA(0): PCI:1:0:0: (--) NVIDIA(0): Mag InnoVision (CRT-0) (--) NVIDIA(0): Brooktree 869 TV Encoder (TV-0) (--) NVIDIA(0): Mag InnoVision (CRT-0): 350.0 MHz maximum pixel clock (--) NVIDIA(0): Brooktree 869 TV Encoder (TV-0): 165.0 MHz maximum pixel (--) NVIDIA(0): clock (--) NVIDIA(0): TV encoder: Brooktree 869 (II) NVIDIA(0): Assigned Display Device: CRT-0 (WW) NVIDIA(0): No valid modes for "1280x1024"; removing. (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "1024x768" (II) NVIDIA(0): "800x600" (II) NVIDIA(0): "640x480" (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768 (WW) NVIDIA(0): No size information available in CRT-0's EDID; cannot compute (WW) NVIDIA(0): DPI from EDID. (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xd0000000 - 0xd7fffff0 (0x7fffff1) MX[B] ... (II) NVIDIA(0): Setting mode "1024x768" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) NVIDIA(0): v4l[/dev/video0]: using hw video scaling [YUY2]. (II) Loading extension NV-CONTROL (WW) NVIDIA(0): Option "CalcAlgorithm" is not used (**) RandR enabled
Ah, y juegos 3D como el "ppracer" (el pinguino que se desliza por valles helados) funcionan. Pero, pero... van lentitos...
- -- Saludos Carlos Robinson -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Made with pgp4pine 1.76
iD8DBQFFOSdmtTMYHG2NR9URAnzUAKCZShhKsxbMsO+YXCKun4Ork1dIBwCfYDj+ HYfoDhwbfIP0//Rsow0CqXc= =PGLj -----END PGP SIGNATURE-----