El 1/09/06, Josep M. Queralt
Para activar el driver nvidia, basta con cambiar en xorg.conf en la seccion Driver, "nv", por "nvidia", siempre y cuando lo hallas instalado correctamente (ejecutado en init 3 "sh nvidiaxxx.run", y que el proceso no halla terminado con algun mensaje de error).
Desde hace, como mucho, un par de meses, NO ES NECESARIO ejecutar el script ni reinstalar cada vez que se modifica el kernel.
Basta con añadir download.nvidia.com/novell a las fuentes de instalación de YAST y este hace el resto.
Más info:
Parece que no leiste tampoco el articulo completo, porque PARA MI ES NECESARIO EJECUTAR EL SCRIPT (y tambien para aquel que no utilice el kernel standar de Suse, por ejemplo Mantel, o compilado por si mismo): 1. openSUSE 10.2-IA32 (>= Alpha3) 1) Kernel sources must be installed and configured. Usually this means installing the 'kernel-source', 'make' and 'gcc' packages with YaST2. 2) Use the nvidia installer for 1.0-8774 (requires pkgconfig and xorg-x11-server-sdk packages to find the correct Xserver module path). sh NVIDIA-Linux-x86-1.0-8774-pkg1.run -q 3) Configure X.Org with sax2 -r -m 0=nvidia (0 is a digit, not a letter!) NOTE: There is no need to try to enable 3D support. It's already enabled, when the nvidia driver is running. IMPORTANT: You need to recompile and install the nvidia kernel module after each kernel update. sh NVIDIA-Linux-x86-1.0-8774-pkg1.run -K Otro detalle, es que para Xorg 7.1, hay que agregar el path para los modulos en el comando: sh NVIDIA-Linux-x86-1.0-8774-pkg1.run -K --x-module-path=/usr/lib/xorg/modules/ Salu2