-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 El 2006-09-21 a las 22:38 +0200, Ignacio de Juan Hatchard escribió:
Lo siento ese mensaje no lo habia recibido la salida del comando "Ismod" es command not found y la otra es:
Es "ele", no "i". Hay que fijarse bien...
linux-32u1:/home/nacho # hwinfo --netcard 23: PCI 07.0: 0200 Ethernet controller [Created at pci.300] UDI: /org/freedesktop/Hal/devices/pci_11ab_1fa7 Unique ID: M71A.yvU5Sj8j6+6 SysFS ID: /devices/pci0000:00/0000:00:07.0 SysFS BusID: 0000:00:07.0 Hardware Class: network Model: "ASUSTeK 88W8310 and 88W8000G [Libertas] 802.11g client chipset" Vendor: pci 0x11ab "Marvell Technology Group Ltd." Device: pci 0x1fa7 "88W8310 and 88W8000G [Libertas] 802.11g client chipset" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x138f Revision: 0x07 Memory Range: 0xdc000000-0xdc00ffff (rw,non-prefetchable) Memory Range: 0xdc010000-0xdc01ffff (rw,non-prefetchable) IRQ: 5 (no events) Module Alias: "pci:v000011ABd00001FA7sv00001043sd0000138Fbc02sc00i00" Config Status: cfg=no, avail=yes, need=no, active=unknown
42: PCI 500.0: 0200 Ethernet controller [Created at pci.300] UDI: /org/freedesktop/Hal/devices/pci_11ab_4362 Unique ID: rBUF.QaYgOoJzo8E Parent ID: nKpy.L7pZg9jzgt2 SysFS ID: /devices/pci0000:00/0000:00:03.2/0000:05:00.0 SysFS BusID: 0000:05:00.0 Hardware Class: network Model: "ASUSTeK Marvell 88E8053 Gigabit Ethernet controller PCIe (Asus)" Vendor: pci 0x11ab "Marvell Technology Group Ltd." Device: pci 0x4362 "88E8053 PCI-E Gigabit Ethernet Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8142 "Marvell 88E8053 Gigabit Ethernet controller PCIe (Asus)" Revision: 0x15 Driver: "sky2" Device File: eth0 Memory Range: 0xdb000000-0xdb003fff (rw,non-prefetchable) I/O Ports: 0xb000-0xbfff (rw) Memory Range: 0x40000000-0x4001ffff (ro,prefetchable,disabled) IRQ: 106 (1447737 events) HW Address: 00:11:d8:aa:40:46 Link detected: yes Module Alias: "pci:v000011ABd00004362sv00001043sd00008142bc02sc00i00" Driver Info #0: Driver Status: sky2 is active Driver Activation Cmd: "modprobe sky2" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #21 (PCI bridge)
A ver... tienes dos tarjetas ethernet: 1) Model: "ASUSTeK 88W8310 and 88W8000G [Libertas] 802.11g client chipset" Vendor: pci 0x11ab "Marvell Technology Group Ltd." 2) Model: "ASUSTeK Marvell 88E8053 Gigabit Ethernet controller PCIe (Asus)" Vendor: pci 0x11ab "Marvell Technology Group Ltd." la primera no está configurada ni activa, la segunda si. ¿Una gigabit? No dijiste nada de eso, ¿realmente usas esa capacidad, es un servidor?. Bueno, el driver es "sky2". Haz lo siguiente (que ya lo dije ayer por la tarde): Tienes que editar el fichero "/etc/sysconfig/powersave/sleep". Busca la entrada "UNLOAD_MODULES_BEFORE_SUSPEND2DISK". La mia tiene esto: UNLOAD_MODULES_BEFORE_SUSPEND2DISK="usb_storage sbp2 uhci_hcd stir4200 rt2500 prism54" La tuya no se lo que tendrá, pero añades "sky2". Busca entonces también la entrada "SUSPEND2DISK_RESTART_SERVICES", y añades "network". Si quieres, también lo puedes hacer desde el Yast, será bajo "System/Powermanagement/Powersave/Sleep_Modes", supongo. Si además haces suspensión a memoria y/o standby, existen otras cuatro variables correspondientes que quizás tendrás que ajustar. Los cambios en esos ficheros creo que sólo se leen al arrancar, por lo que tendrías que rebotar posiblemente. En cualquier caso, prueba a ver que pasa. - -- Saludos Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Made with pgp4pine 1.76 iD8DBQFFEwG3tTMYHG2NR9URAvHFAJ0YhP/Jotcf3eMvOtxiXjF7rrBBmwCeJmhB pch0L+S8hm9mb6LIdpUOaS0= =bnYZ -----END PGP SIGNATURE-----