Hola de nuevo. He hecho lo que me has dicho con los 5 discos que tengo: 4 SATAII (sda, sdb, sdc y sdd) y 1 ATA (hdc). Pues en los 4 discos SATAII la salida ha sido: ZRrJ D|f1 GRUB Geom Hard Disk Read Error ¿Quiere decir que tengo el BRUB instalado en todos los discos? La salida de fdisk -l es: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 19000 152617468+ fd Linux raid autodetect /dev/sda2 19001 19456 3662820 82 Linux swap / Solaris Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 1 19000 152617468+ fd Linux raid autodetect /dev/sdb2 19001 19456 3662820 82 Linux swap / Solaris Disk /dev/sdc: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 * 1 7 56196 83 Linux /dev/sdc2 8 3924 31463302+ 83 Linux /dev/sdc3 3925 19456 124760790 fd Linux raid autodetect Disk /dev/sdd: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 7 56196 83 Linux /dev/sdd2 8 3924 31463302+ 83 Linux /dev/sdd3 3925 19456 124760790 fd Linux raid autodetect Disk /dev/hdc: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hdc1 * 1 9728 78140128+ 7 HPFS/NTFS Disk /dev/md0: 156.2 GB, 156280160256 bytes 2 heads, 4 sectors/track, 38154336 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md0 doesn't contain a valid partition table Disk /dev/md1: 127.7 GB, 127754960896 bytes 2 heads, 4 sectors/track, 31190176 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md1 doesn't contain a valid partition table Disk /dev/sde: 251.0 GB, 251000193024 bytes 255 heads, 63 sectors/track, 30515 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sde1 1 30513 245095641 83 Linux Por lo que se ve, el disco de arranque de SuSE es el sdc y el de Windows el hdc. Si el problema de no poder configurar el menu.lst es el GRUB instalado en los otros discos ¿Como puedo eliminar el GRUB de los otros discos? Gracias de nuevo. On Sunday 23 April 2006 13:59, Carlos E. R. wrote:
/dev/hda of=_dev_hda count=1
-- Joan Carles Jimenez jjcarles@terra.es