Hallo Liste, im Segment hinter dem Server funktioniert es jetzt, das Problem sind die Rechner zwischen FritzBox und dem Server im Segment 192.168.178.x, speziell die, die über Wlan an der FritzBox hängen. Der Server quittiert Anfragen per HTTP mit: kernel: [123,456] IPv4: host 192.168.178.93/if3 ignores redirects for 173.194.40.50 to 192.168.178.1 kann ich da am Routing schrauben? Johannes Am 19.05.2013 21:57, schrieb Johannes Kapune:
Kaum macht man es richtig funktioniert es!
Danke für den Stubs.
Johannes
Am 19.05.2013 21:47, schrieb Johannes Kapune:
auf dem ersten Blick ist route -n unterschiedlich, ich könnte mal auf dem Server die Option im dhcpd ändern
Johannes
Am 19.05.2013 21:43, schrieb Johannes Kapune:
Hallo,
Am 19.05.2013 21:14, schrieb Andre Tann:
Am 19.05.2013 20:53, schrieb Johannes Kapune:
ich gebe einem Linux-Rechner eine feste IP-Adresse,
Welche Adresse? Welches Standard-Gateway? Welchen DNS-Server?
Gib mal von der Linux-Kiste die Ausgabe von
# ifconfig -a # cat /etc/resolv.conf # route -n
wenn sie a) mit fixer Adresse läuft, und wenn sie b) über dhcp läuft.
dann kann ich mit dem Firefox auf die FritzBox zugreifen - stelle ich auf dhcp um ist die FritzBox nicht erreichbar, das Internet über diese Box aber sehr wohl noch.
Wie versuchst Du die Fritzbox zu erreichen - über die IP-Adresse? Über fritz.box?
beides, wenn ich fritz.box rufe löst mein Nameserver richtig auf
WLAN ist ausgestellt per Schalter
Tosh-TECRA-J-01:/home/johannes # ifconfig -a eth0 Link encap:Ethernet Hardware Adresse 00:1C:7E:97:B3:B5 inet Adresse:192.168.100.90 Bcast:192.168.100.255 Maske:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2163 errors:0 dropped:0 overruns:0 frame:0 TX packets:1627 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 Sendewarteschlangenlänge:1000 RX bytes:1615862 (1.5 Mb) TX bytes:178942 (174.7 Kb) Interrupt:20 Speicher:ffcc0000-ffce0000
lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1601 errors:0 dropped:0 overruns:0 frame:0 TX packets:1601 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 Sendewarteschlangenlänge:0 RX bytes:148686 (145.2 Kb) TX bytes:148686 (145.2 Kb)
wlan0 Link encap:Ethernet Hardware Adresse 00:21:6B:29:9A:1E BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 Sendewarteschlangenlänge:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Tosh-TECRA-J-01:/home/johannes # cat /etc/resolv.conf ### /etc/resolv.conf file autogenerated by netconfig! # # Before you change this file manually, consider to define the # static DNS configuration using the following variables in the # /etc/sysconfig/network/config file: # NETCONFIG_DNS_STATIC_SEARCHLIST # NETCONFIG_DNS_STATIC_SERVERS # NETCONFIG_DNS_FORWARDER # or disable DNS configuration updates via netconfig by setting:
# NETCONFIG_DNS_POLICY=''
#
# See also the netconfig(8) manual page and other documentation.
#
# Note: Manual change of this file disables netconfig too, but
# may get lost when this file contains comments or empty lines
# only, the netconfig settings are same with settings in this
# file and in case of a "netconfig update -f" call.
#
### Please remove (at least) this line when you modify the file! search kapune.lokal nameserver 192.168.100.200 nameserver 192.168.178.1
Tosh-TECRA-J-01:/home/johannes # route -n Kernel IP Routentabelle Ziel Router Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.100.200 0.0.0.0 UG 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.178.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 Tosh-TECRA-J-01:/home/johannes # Tosh-TECRA-J-01:/home/johannes #
jetzt_satisch:
Tosh-TECRA-J-01:/home/johannes # ifconfig -a eth0 Link encap:Ethernet Hardware Adresse 00:1C:7E:97:B3:B5 inet Adresse:192.168.100.90 Bcast:192.168.100.255 Maske:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2378 errors:0 dropped:0 overruns:0 frame:0 TX packets:1861 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 Sendewarteschlangenlänge:1000 RX bytes:1704591 (1.6 Mb) TX bytes:207255 (202.3 Kb) Interrupt:20 Speicher:ffcc0000-ffce0000
lo Link encap:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1601 errors:0 dropped:0 overruns:0 frame:0 TX packets:1601 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 Sendewarteschlangenlänge:0 RX bytes:148686 (145.2 Kb) TX bytes:148686 (145.2 Kb)
wlan0 Link encap:Ethernet Hardware Adresse 00:21:6B:29:9A:1E BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 Sendewarteschlangenlänge:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Tosh-TECRA-J-01:/home/johannes # cat /etc/resolv.conf ### /etc/resolv.conf file autogenerated by netconfig! # # Before you change this file manually, consider to define the # static DNS configuration using the following variables in the # /etc/sysconfig/network/config file: # NETCONFIG_DNS_STATIC_SEARCHLIST # NETCONFIG_DNS_STATIC_SERVERS # NETCONFIG_DNS_FORWARDER # or disable DNS configuration updates via netconfig by setting: # NETCONFIG_DNS_POLICY='' # # See also the netconfig(8) manual page and other documentation. # # Note: Manual change of this file disables netconfig too, but # may get lost when this file contains comments or empty lines # only, the netconfig settings are same with settings in this # file and in case of a "netconfig update -f" call. # ### Please remove (at least) this line when you modify the file! search kapune.lokal nameserver 192.168.100.200 nameserver 192.168.178.1
Tosh-TECRA-J-01:/home/johannes # route -n Kernel IP Routentabelle Ziel Router Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.100.200 0.0.0.0 UG 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 Tosh-TECRA-J-01:/home/johannes # ^C Tosh-TECRA-J-01:/home/johannes #
-- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org