Hallo,
hat hier jemand von btrfs Ahnung? Ich verwende dieses Dateisystem trotz aller
Unsicherheit. Ich habe ja auch immer ein Backup.
Jetzt ist mir die brtfs homepartition kaputtgegangen. Soweit kein Problem in
der fstab eine Reservepartition zur home erklärt, Daten draufgespielt und
weitergehts.
Die Partition /dev/sda6 welche kaputt ist verät mir aber nicht was los ist.
L1-suse:/home/sebastian # btrfsck /dev/sda6
checking extents
checking fs roots
checking root refs
found 6092677120 bytes used err is 0
total csum bytes: 5892972
total tree bytes: 43069440
total fs tree bytes: 24444928
btree space waste bytes: 10751870
file data blocks allocated: 8673017856
referenced 5536342016
Btrfs v0.19+20120406
dmesg:
[ 1.368276] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.368319] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.370504] ata2.00: ATAPI: HL-DT-STDVDRAM GT33N, LE02, max UDMA/66
[ 1.373899] ata2.00: configured for UDMA/66
[ 1.412510] ata1.00: ATA-8: ST9500420AS, 0003LVM1, max UDMA/100
[ 1.412517] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.415066] ata1.00: configured for UDMA/100
[ 1.415449] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0003
PQ: 0 ANSI: 5
[ 1.415913] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 1.416301] sd 0:0:0:0: [sda] Write Protect is off
[ 1.416309] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.416522] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.544705] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10
sda11 sda12 >
[ 1.545966] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.547909] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT33N LE02
PQ: 0 ANSI: 5
[ 1.600516] usb 1-1.1: new low-speed USB device number 3 using ehci_hcd
[ 1.684230] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c044
[ 1.684241] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.684247] usb 1-1.1: Product: USB-PS/2 Optical Mouse
[ 1.684251] usb 1-1.1: Manufacturer: Logitech
[ 1.753854] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
[ 1.831279] usb 1-1.2: New USB device found, idVendor=05e3, idProduct=0608
[ 1.831290] usb 1-1.2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 1.831296] usb 1-1.2: Product: USB2.0 Hub
[ 1.831831] hub 1-1.2:1.0: USB hub found
[ 1.832141] hub 1-1.2:1.0: 4 ports detected
[ 1.897830] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
[ 1.976129] usb 1-1.4: New USB device found, idVendor=6666, idProduct=5555
[ 1.976139] usb 1-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 1.976146] usb 1-1.4: Product: Weather Direct Light Wireless Device
[ 1.976151] usb 1-1.4: Manufacturer: LA CROSSE TECHNOLOGY
[ 1.976155] usb 1-1.4: SerialNumber: 0123456
[ 2.100950] usb 1-1.2.1: new high-speed USB device number 6 using ehci_hcd
[ 2.157340] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id:
0x1e0b1, caps: 0xd000b3/0x340000/0xa0400
[ 2.157359] psmouse serio1: synaptics: serio: Synaptics pass-through port
at isa0060/serio1/input0
[ 2.183974] usb 1-1.2.1: New USB device found, idVendor=05e3,
idProduct=070e
[ 2.183985] usb 1-1.2.1: New USB device strings: Mfr=0, Product=1,
SerialNumber=2
[ 2.183991] usb 1-1.2.1: Product: USB Storage
[ 2.183996] usb 1-1.2.1: SerialNumber: 000000009601
[ 2.224223] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input1
[ 2.229186] PM: Hibernation image not present or could not be loaded.
[ 2.229248] registered taskstats version 1
[ 2.229954] Magic number: 8:156:929
[ 2.229978] block sda10: hash matches
[ 2.230167] rtc_cmos 00:04: setting system clock to 2012-08-04 09:55:29 UTC
(1344074129)
[ 2.231587] Freeing unused kernel memory: 944k freed
[ 2.231785] Write protecting the kernel read-only data: 12288k
[ 2.232653] Freeing unused kernel memory: 216k freed
[ 2.240758] Freeing unused kernel memory: 1968k freed
[ 2.248594] usb 1-1.2.2: new high-speed USB device number 7 using ehci_hcd
[ 2.283625] alua: device handler registered
[ 2.285575] emc: device handler registered
[ 2.287601] hp_sw: device handler registered
[ 2.289677] rdac: device handler registered
[ 2.295415] udevd[107]: starting version 173
[ 2.312807] ACPI: acpi_idle registered with cpuidle
[ 2.345324] usb 1-1.2.2: New USB device found, idVendor=0c0b,
idProduct=b159
[ 2.345331] usb 1-1.2.2: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 2.345334] usb 1-1.2.2: Product: External HDD
[ 2.345337] usb 1-1.2.2: Manufacturer: DMI
[ 2.345340] usb 1-1.2.2: SerialNumber: 00eff052
[ 2.366303] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
[ 2.369417] hid-generic 0003:046D:C044.0001: input,hidraw0: USB HID v1.10
Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.2-1.1/input0
[ 2.375820] hid-generic 0003:6666:5555.0002: hiddev0,hidraw1: USB HID v1.11
Device [LA CROSSE TECHNOLOGY Weather Direct Light Wireless Device] on
usb-0000:00:12.2-1.4/input0
[ 4.227460] Btrfs loaded
[ 4.342089] device label reserve devid 1 transid 1816 /dev/sda3
[ 4.360216] device label root-suse devid 1 transid 102664 /dev/sda5
[ 4.377728] device label home-suse devid 1 transid 88944 /dev/sda6
[ 4.396446] device label sebastian_daten devid 1 transid 4864 /dev/sda7
[ 4.407617] device label virtuelle_platte devid 1 transid 16446 /dev/sda8
[ 4.428427] device label system devid 1 transid 3805 /dev/sda9
[ 4.439789] device label sicherung devid 1 transid 1771 /dev/sda10
[ 4.457767] device label bilder devid 1 transid 2281 /dev/sda11
[ 4.477654] device label medien devid 1 transid 2508 /dev/sda12
[ 4.487414] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
[ 4.487420] PM: Marking nosave pages: [mem 0xbeb9a000-0xbf319fff]
[ 4.487448] PM: Marking nosave pages: [mem 0xbfc00000-0xffffffff]
[ 4.488385] PM: Basic memory bitmaps created
[ 10.136068] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e,
buttons: 3/3
[ 10.456498] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input3
[ 10.613242] PM: Basic memory bitmaps freed
[ 10.839965] PM: Starting manual resume from disk
[ 10.839971] PM: Hibernation image partition 8:2 present
[ 10.839972] PM: Looking for hibernation image.
[ 10.841206] PM: Image not found (code -22)
[ 10.841212] PM: Hibernation image not present or could not be loaded.
[ 10.867603] device label root-suse devid 1 transid 102664 /dev/sda5
[ 10.868630] btrfs: disk space caching is enabled
[ 10.917751] btrfs: bdev /dev/sda5 errs: wr 0, rd 0, flush 0, corrupt 0, gen
0
[ 11.919072] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP
+AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
[ 12.360687] systemd[1]: Set hostname to .
[ 15.334315] systemd[1]: [/etc/init.d/cups:19] Failed to add LSB Provides
name cupsd.service, ignoring: File exists
[ 16.044782] udevd[406]: starting version 173
[ 16.743728] boot.localnet[437]: Using boot-specified hostname 'L1-
suse.Tuxnet'
[ 16.792483] boot.lvm[436]: Waiting for udev to settle...
[ 16.794166] boot.localnet[437]: Setting up hostname 'L1-suse'..done
[ 16.815874] bootsplash: status on console 0 changed to on
[ 18.251994] boot.localnet[437]: Setting up loopback interface RTNETLINK
answers: File exists
[ 18.253918] boot.localnet[437]: ..done
[ 19.757826] btrfs: disk space caching is enabled
[ 20.241832] boot.lvm[436]: Scanning for LVM volume groups...
[ 20.699503] ACPI: Deprecated procfs I/F for AC is loaded, please retry with
CONFIG_ACPI_PROCFS_POWER cleared
[ 20.699669] ACPI: AC Adapter [ADP1] (on-line)
[ 20.869483] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 20.870517] ACPI: Lid Switch [LID0]
[ 20.870597] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 20.870709] ACPI: Power Button [PWRB]
[ 20.870794] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 20.870845] ACPI: Power Button [PWRF]
[ 20.886119] ACPI: Deprecated procfs I/F for battery is loaded, please retry
with CONFIG_ACPI_PROCFS_POWER cleared
[ 20.886126] ACPI: Battery Slot [BAT0] (battery present)
[ 20.974399] microcode: CPU0: patch_level=0x03000014
[ 20.989416] cfg80211: Calling CRDA to update world regulatory domain
[ 21.318653] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[ 21.417875] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial
brightness
[ 21.419855] acpi device:3f: registered as cooling_device4
[ 21.419870] ACPI: Video Device [VGA2] (multi-head: yes rom: no post: no)
[ 21.419908] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input7
[ 21.682576] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 21.682612] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 21.687735] kvm: Nested Virtualization enabled
[ 21.687740] kvm: Nested Paging enabled
[ 21.724536] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 21.740075] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 21.740182] r8169 0000:01:00.0: irq 46 for MSI/MSI-X
[ 21.740343] r8169 0000:01:00.0: eth0: RTL8168e/8111e at 0xffffc90000c46000,
f0:de:f1:ae:5c:0c, XID 0c200000 IRQ 46
[ 21.740346] r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes,
tx checksumming: ko]
[ 21.758043] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2
cdda tray
[ 21.758053] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 21.758453] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 21.888399] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO
conflicts with Region \_SB_.PCI0.SMB_.SMB0 1 (20120320/utaddress-251)
[ 21.888408] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 21.891884] sdhci: Secure Digital Host Controller Interface driver
[ 21.891891] sdhci: Copyright(c) Pierre Ossman
[ 21.934705] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 21.934708] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 21.934710] thinkpad_acpi: ThinkPad BIOS GBET01WW(1.01), EC unknown
[ 21.934711] thinkpad_acpi: Lenovo ThinkPad E525, model 1200CTO
[ 21.935307] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 21.935357] thinkpad_acpi: This ThinkPad has standard ACPI backlight
brightness control, supported by the ACPI video driver
[ 21.935358] thinkpad_acpi: Disabling thinkpad-acpi brightness events by
default...
[ 21.944778] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not
the best way to go about it
[ 21.944781] thinkpad_acpi: please consider using the driver defaults, and
refer to up-to-date thinkpad-acpi documentation
[ 21.945448] thinkpad_acpi: asked for hotkey mask 0x0077ffff, but firmware
forced it to 0x0003887c
[ 21.964184] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is
blocked
[ 21.968214] Registered led device: tpacpi::thinklight
[ 21.968226] thinkpad_acpi: Standard ACPI backlight interface available, not
loading native one
[ 21.968412] thinkpad_acpi: Console audio control enabled, mode: monitor
(read only)
[ 21.973459] input: ThinkPad Extra Buttons as
/devices/platform/thinkpad_acpi/input/input9
[ 22.116331] ALSA hda_intel.c:2731 Using LPIB position fix
[ 22.116394] snd_hda_intel 0000:00:01.1: irq 47 for MSI/MSI-X
[ 22.120355] ALSA hda_intel.c:1628 Enable sync_write for stable
communication
[ 22.232516] powernow-k8: Found 1 AMD A8-3500M APU with Radeon(tm) HD
Graphics (4 cpu cores) (version 2.20.00)
[ 22.232550] powernow-k8: Core Performance Boosting: on.
[ 22.278978] microcode: CPU1: patch_level=0x03000014
[ 22.281243] microcode: CPU2: patch_level=0x03000014
[ 22.283544] microcode: CPU3: patch_level=0x03000014
[ 22.285523] microcode: Microcode Update Driver: v2.00
, Peter Oruba
[ 22.285551] powernow-k8: 0 : pstate 0 (1500 MHz)
[ 22.285553] powernow-k8: 1 : pstate 1 (1400 MHz)
[ 22.285554] powernow-k8: 2 : pstate 2 (1200 MHz)
[ 22.285556] powernow-k8: 3 : pstate 3 (1100 MHz)
[ 22.285557] powernow-k8: 4 : pstate 4 (1000 MHz)
[ 22.285558] powernow-k8: 5 : pstate 5 (900 MHz)
[ 22.285559] powernow-k8: 6 : pstate 6 (800 MHz)
[ 22.644498] cfg80211: World regulatory domain updated:
[ 22.644508] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 22.644514] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 22.644519] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 22.644523] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 22.644527] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 22.644531] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 22.820745] ifup[779]: Service network not started and mode 'auto' ->
skipping
[ 22.832723] input: HD-Audio Generic HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.1/sound/card0/input10
[ 22.832960] ALSA hda_intel.c:2731 Using LPIB position fix
[ 22.839315] ALSA hda_intel.c:1628 Enable sync_write for stable
communication
[ 22.928860] hda_codec: CX20590: BIOS auto-probing.
[ 22.928887] ALSA hda_auto_parser.c:322 autoconfig: line_outs=1
(0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 22.928893] ALSA hda_auto_parser.c:326 speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 22.928899] ALSA hda_auto_parser.c:330 hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[ 22.928902] ALSA hda_auto_parser.c:331 mono: mono_out=0x0
[ 22.928906] ALSA hda_auto_parser.c:335 inputs:
[ 22.928912] ALSA hda_auto_parser.c:339 Mic=0x1bALSA hda_auto_parser.c:339
Internal Mic=0x23
[ 22.928920] ALSA hda_auto_parser.c:341
[ 22.929973] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:14.2/input/input11
[ 22.933621] input: HD-Audio Generic Mic as
/devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 22.934945] mtp-probe[677]: checking bus 1, device 3:
"/sys/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.1"
[ 22.935265] mtp-probe[692]: checking bus 1, device 7:
"/sys/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2.2"
[ 22.935416] mtp-probe[693]: checking bus 1, device 6:
"/sys/devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1.2/1-1.2.1"
[ 22.936366] input: HD-Audio Generic Front Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 22.936701] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7806] (rev
0)
[ 22.936948] Registered led device: mmc0::
[ 22.959089] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[ 22.959143] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e823] (rev
4)
[ 22.959285] Registered led device: mmc1::
[ 22.981244] mmc1: SDHCI controller on PCI [0000:04:00.0] using DMA
[ 23.091527] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 23.092075] rtlwifi: wireless switch is on
[ 23.131899] boot.lvm[436]: No volume groups found
[ 23.142232] ifup[839]: Service network not started and mode 'auto' ->
skipping
[ 23.157589] mtp-probe[692]: bus: 1, device: 7 was not an MTP device
[ 23.157611] mtp-probe[677]: bus: 1, device: 3 was not an MTP device
[ 23.157829] mtp-probe[693]: bus: 1, device: 6 was not an MTP device
[ 23.521408] device-mapper: uevent: version 1.0.3
[ 23.521612] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-devel@redhat.com
[ 23.522935] boot.lvm[436]: No volume groups found
[ 23.523960] boot.lvm[436]: Reading all physical volumes. This may take a
while...
[ 23.524477] boot.lvm[436]: Activating LVM volume groups...
[ 23.911002] usbcore: registered new interface driver uas
[ 23.950817] Initializing USB Mass Storage driver...
[ 23.951250] scsi3 : usb-storage 1-1.2.1:1.0
[ 23.951796] scsi4 : usb-storage 1-1.2.2:1.0
[ 23.952135] usbcore: registered new interface driver usb-storage
[ 23.952139] USB Mass Storage support registered.
[ 24.087337] boot.lvm[436]: No volume groups found
[ 24.089640] boot.lvm[436]: ..done
[ 24.953860] scsi 3:0:0:0: Direct-Access Generic STORAGE DEVICE 9601
PQ: 0 ANSI: 0
[ 24.954389] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 24.956270] scsi 3:0:0:1: Direct-Access Generic STORAGE DEVICE 9601
PQ: 0 ANSI: 0
[ 24.956774] sd 3:0:0:1: Attached scsi generic sg3 type 0
[ 24.959979] scsi 3:0:0:2: Direct-Access Generic STORAGE DEVICE 9601
PQ: 0 ANSI: 0
[ 24.960457] sd 3:0:0:2: Attached scsi generic sg4 type 0
[ 24.960642] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 24.962605] scsi 3:0:0:3: Direct-Access Generic STORAGE DEVICE 9601
PQ: 0 ANSI: 0
[ 24.963087] sd 3:0:0:3: Attached scsi generic sg5 type 0
[ 24.963344] sd 3:0:0:1: [sdc] Attached SCSI removable disk
[ 24.965583] sd 3:0:0:2: [sdd] Attached SCSI removable disk
[ 24.966943] sd 3:0:0:3: [sde] Attached SCSI removable disk
[ 24.969337] scsi 4:0:0:0: Direct-Access SAMSUNG HD502HJ
PQ: 0 ANSI: 2
[ 24.969745] sd 4:0:0:0: Attached scsi generic sg6 type 0
[ 24.971319] sd 4:0:0:0: [sdf] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 24.973624] sd 4:0:0:0: [sdf] Write Protect is off
[ 24.973631] sd 4:0:0:0: [sdf] Mode Sense: 38 00 00 00
[ 24.975951] sd 4:0:0:0: [sdf] No Caching mode page present
[ 24.976062] sd 4:0:0:0: [sdf] Assuming drive cache: write through
[ 24.982578] sd 4:0:0:0: [sdf] No Caching mode page present
[ 24.982693] sd 4:0:0:0: [sdf] Assuming drive cache: write through
[ 25.386641] Adding 8385532k swap on /dev/sda2. Priority:0 extents:1
across:8385532k
[ 26.607295] systemd-fsck[919]: boot wurde nicht ordnungsgemäß ausgehängt,
Prüfung erzwungen.
[ 26.652102] device label medien devid 1 transid 2508 /dev/sda12
[ 26.653080] btrfs: disk space caching is enabled
[ 26.687748] btrfs: bdev /dev/sda12 errs: wr 0, rd 0, flush 0, corrupt 0, gen
0
[ 27.407157] device label sicherung devid 1 transid 1771 /dev/sda10
[ 27.408713] btrfs: disk space caching is enabled
[ 27.428217] btrfs: bdev /dev/sda10 errs: wr 0, rd 0, flush 0, corrupt 0, gen
0
[ 28.226859] systemd-fsck[919]: boot: 48/128520 Dateien (27.1% nicht
zusammenhängend), 48393/513024 Blöcke
[ 28.299140] EXT4-fs (sda1): mounting ext2 file system using the ext4
subsystem
[ 28.308843] EXT4-fs (sda1): mounted filesystem without journal. Opts:
acl,user_xattr
[ 28.453188] device label system devid 1 transid 3805 /dev/sda9
[ 28.454160] btrfs: disk space caching is enabled
[ 28.904420] device label sebastian_daten devid 1 transid 4864 /dev/sda7
[ 28.913305] device label virtuelle_platte devid 1 transid 16446 /dev/sda8
[ 28.921573] device label bilder devid 1 transid 2281 /dev/sda11
[ 28.924781] sdf: sdf1
[ 28.929430] device label reserve devid 1 transid 1816 /dev/sda3
[ 28.930478] btrfs: disk space caching is enabled
[ 28.931860] sd 4:0:0:0: [sdf] No Caching mode page present
[ 28.932048] sd 4:0:0:0: [sdf] Assuming drive cache: write through
[ 28.932194] sd 4:0:0:0: [sdf] Attached SCSI disk
[ 28.946069] ata_id[1070]: HDIO_GET_IDENTITY failed for '/dev/sdf': Invalid
argument
[ 28.971770] btrfs: disk space caching is enabled
[ 29.003235] btrfs: bdev /dev/sda9 errs: wr 0, rd 0, flush 0, corrupt 0, gen
0
[ 29.086729] btrfs: disk space caching is enabled
[ 29.110411] btrfs: disk space caching is enabled
[ 29.171330] btrfs: bdev /dev/sda3 errs: wr 0, rd 0, flush 0, corrupt 0, gen
0
[ 29.416729] btrfs: bdev /dev/sda7 errs: wr 0, rd 0, flush 0, corrupt 0, gen
0
[ 29.492322] btrfs: bdev /dev/sda11 errs: wr 0, rd 0, flush 0, corrupt 0, gen
0
[ 29.620591] btrfs: bdev /dev/sda8 errs: wr 0, rd 0, flush 0, corrupt 0, gen
0
[ 31.377822] boot.quota[1145]: Turning quota on
[ 31.482911] boot.quota[1145]: Checking quotas. This may take some time.
[ 31.664348] boot.quota[1145]: ..done
[ 31.903095] boot.fglrxrebuild[1146]: Check for rebuild the fglrx kernel
module if necessary ...
[ 31.984417] boot.fglrxrebuild[1146]: The fglrx kernel module does not
exist! I build it NOW. Please wait ...
[ 81.721877] boot.fglrxrebuild[1146]: FATAL: The fglrx kernel module could
not be built!
[ 81.809985] boot.fglrxrebuild[1146]: Check for the fglrx kernel module is
running...
[ 81.836794] boot.fglrxrebuild[1146]: The fglrx kernel module is not loaded!
Try it to modprobe now ...
[ 81.840760] boot.fglrxrebuild[1146]: FATAL: Module fglrx not found.
[ 81.847829] boot.fglrxrebuild[1146]: FATAL: The fglrx kernel module could
not loaded!
[ 81.849071] boot.fglrxrebuild[1146]: ..failed
[ 81.849886] systemd[1]: fglrxrebuild.service: control process exited,
code=exited status=1
[ 81.852205] systemd[1]: Unit fglrxrebuild.service entered failed state.
[ 81.941659] cpufreq[1577]: Loading CPUFreq modules..done
[ 82.058876] microcode: Microcode Update Driver: v2.00 removed.
[ 82.078580] microcode: CPU0: patch_level=0x03000014
[ 82.083268] microcode: CPU1: patch_level=0x03000014
[ 82.087377] microcode: CPU2: patch_level=0x03000014
[ 82.091407] microcode: CPU3: patch_level=0x03000014
[ 82.094967] microcode: Microcode Update Driver: v2.00
, Peter Oruba
[ 85.846655] r8169 0000:01:00.0: eth0: link down
[ 85.846673] r8169 0000:01:00.0: eth0: link down
[ 85.847952] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 86.193876] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 86.310154] NET: Registered protocol family 17
[ 87.393513] r8169 0000:01:00.0: eth0: link up
[ 87.395728] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 87.746835] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 87.746856] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 87.747456] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 87.747725] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 87.910252] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 188.729964] EXT4-fs (sdf1): warning: maximal mount count reached, running
e2fsck is recommended
[ 188.752922] EXT4-fs (sdf1): recovery complete
[ 188.754296] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts:
(null)
[ 202.682331] fuse init (API version 7.19)
Huch da wird über etliche Partitionen gemeckert (disk space caching is
enabled). Insbesondere auch über die sdf1 meine Sicherungen. Der atidriver
nervt auch könnte auch die Ursache des Problems sein. Nach dem Aufwachen habe
ich öfters keine Anzeige mehr. Da hilft dann nur noch Ausschalten Netzteil ab
und Akku raus. Den freien Treiber habe ich nichts ans laufen bekommen. Warum
nimmt suse eigentlich immer noch den radeonhd? Der radeon ist doch schon im
Kernel und inzwischen meines Wissens sogar besser Unterstützt.
L1-suse:/home/sebastian # mount /dev/sda6 /mnt/reserve/
Speicherzugriffsfehler
na immerhin sagt er jetzt etwas bisher hing er immer und ich musste die
konsole schließen.
Die Partition zu löschen und neu anlegen geht mit Yast nicht da der
Partitionierer erst gar nicht startet. Er leibt in der Initialisierung
stecken. Wenn ich Ihn dann mit Gewalt <Strg><Alt><Esc> abwürge bekomme ich
folgende Meldung:
Config 'root' not found.
terminate called after throwing an instance of 'std::bad_alloc'
what(): std::bad_alloc
YaST got signal 6 at YCP file Storage.ycp:1824
/sbin/yast2: Zeile 427: 4313 Abgebrochen $ybindir/y2base $module
"$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
Config 'root' not found.
Von Hand hab ich die richtigen Befehle nicht zur Hand und bin mir auch
unsicher welche Optionen ich angeben muss. Ich möchte die Partition wieder mit
einem Label versehen.
Zudem sollte so ein Fehler ja auch in denn Bugreport. Da komme ich aber schon
bei der eigenen Anmeldung in Sprachprobleme ganz abgesehen von der
Fehlerbeschreibung.
Gruß
Sebastian
--
Um die Liste abzubestellen, schicken Sie eine Mail an:
opensuse-de+unsubscribe@opensuse.org
Um den Listen Administrator zu erreichen, schicken
Sie eine Mail an: opensuse-de+owner@opensuse.org