Ich vermute, dass die Konsolen (Ctrl-Alt-F1, etc.) bei einem Thinkpad Edge 13 dunkel bleiben, seitdem ich den ATI-Treiber installiert habe. So genau kann ich es nicht sagen, weil das Thinkpad in einem anderen Raum steht und ich per ssh konfiguriere. Hier ist die komplette Hardware: http://www.smolts.org/client/show_all/pub_71c7527a-7a40-4bd4-ac0e-2e99485193... uname -r 2.6.34.7-0.7-desktop rpm -qa | grep fglrx x11-video-fglrxG02-8.762-33.1.x86_64 ati-fglrxG02-kmp-default-8.762_k2.6.34.0_12-31.1.x86_64 ati-fglrxG02-kmp-desktop-8.762_k2.6.34.0_12-31.1.x86_64 hwinfo --gfxcard 28: PCI 105.0: 0300 VGA compatible controller (VGA) [Created at pci.318] Unique ID: ul7N.Y1oQ3yJbwI3 Parent ID: vSkL.2yY_xudKZ6E SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0 SysFS BusID: 0000:01:05.0 Hardware Class: graphics card Model: "ATI Mobility Radeon HD Graphics (RS880 9712)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x9712 "ATI Mobility Radeon HD Graphics (RS880 9712)" SubVendor: pci 0x17aa "Lenovo" SubDevice: pci 0x21c6 Driver: "radeon" Driver Modules: "drm" Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable) I/O Ports: 0x9000-0x9fff (rw) Memory Range: 0xd0500000-0xd050ffff (rw,non-prefetchable) Memory Range: 0xd0400000-0xd04fffff (rw,non-prefetchable) IRQ: 18 (487 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00001002d00009712sv000017AAsd000021C6bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: fglrx Driver Info #1: XFree86 v4 Server Module: fglrx 3D Support: yes Extensions: dri Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #9 (PCI bridge) Primary display adapter: #28 hwinfo --framebuffer 02: None 00.0: 11001 VESA Framebuffer [Created at bios.459] Unique ID: rdCR.iZqfx+KgGd1 Hardware Class: framebuffer Model: "(C) 1988-2005, ATI RS880M" Vendor: "(C) 1988-2005, ATI Technologies Inc." Device: "RS880M" SubVendor: "ATI ATOMBIOS" SubDevice: Revision: "01.00" Memory Size: 16 MB Memory Range: 0xc0000000-0xc0ffffff (rw) Mode 0x0300: 640x400 (+640), 8 bits Mode 0x0301: 640x480 (+640), 8 bits Mode 0x0303: 800x600 (+832), 8 bits Mode 0x0305: 1024x768 (+1024), 8 bits Mode 0x0311: 640x480 (+1280), 16 bits Mode 0x0314: 800x600 (+1600), 16 bits Mode 0x0317: 1024x768 (+2048), 16 bits Mode 0x030e: 320x200 (+640), 16 bits Mode 0x0320: 320x200 (+1280), 24 bits Mode 0x0393: 320x240 (+320), 8 bits Mode 0x0395: 320x240 (+640), 16 bits Mode 0x0396: 320x240 (+1280), 24 bits Mode 0x03b3: 512x384 (+512), 8 bits Mode 0x03b5: 512x384 (+1024), 16 bits Mode 0x03b6: 512x384 (+2048), 24 bits Mode 0x03c3: 640x350 (+640), 8 bits Mode 0x03c5: 640x350 (+1280), 16 bits Mode 0x03c6: 640x350 (+2560), 24 bits Mode 0x0333: 720x400 (+768), 8 bits Mode 0x0335: 720x400 (+1472), 16 bits Mode 0x0336: 720x400 (+2944), 24 bits Mode 0x0501: 640x480 (+640), 8 bits Mode 0x0503: 800x600 (+832), 8 bits Mode 0x0321: 640x480 (+2560), 24 bits Mode 0x0322: 800x600 (+3200), 24 bits Mode 0x0323: 1024x768 (+4096), 24 bits Config Status: cfg=no, avail=yes, need=no, active=unknown Die phys. Auflösung ist 1366x768, das bei der Installation aber nicht ausgewählt werden konnte. In der menu.lst steth "vga=0x317" Was könnte ich probieren? Al -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org